Boat & Motor Storage Products

Stock# 1582127
Universal round cup motor flushers are for use on all lower units with side water inlets. Install in seconds using just a garden hose.

Stock# 1582128
Universal rectangular cup motor flushers are for use on all lower units with side water inlets. Install in seconds using just a garden hose.

Stock# 1582129
Universal dual feed rectangular cup motor flushers are for use on all lower units with side water inlets. Install in seconds using just a garden hose.

Stock# 1492202
Dual outlet motor flushing kit allows for two motors to be flushed at the same time. Comes with 2 rotating male connectors attach to any outboard motor flush port or ear muffs.

Stock# 5229524
Portable submersible pump is a great way to remove unwanted water from boats, pool covers, aquariums and sump pits. Convenient and safe, too, because it needs no electrical cord - runs up to 5 hours on three alkaline 'D' batteries.

Stock# 1609581
Quickly and efficiently service inboard/outboard marine engines. The patented Do-It-Yourself Winterizer allows flushing and preparation of boat engine for winter storage with just five gallons of antifreeze and your flusher. Save time and money season after season. Great for technicians, too.

Stock# 5212107
The PWC dolly from C.E. Smith is made of a heavy duty galvanized tubular frame and has two 4' carpeted bunks that can be adjusted to fit PWC's, jon boats or inflatables.

Stock# 5250005-ORMD
Protects outboard motors, marine engines & internal combustion engines during periods of storage, insures longer life. As long term metal protectant, it keeps pistons, rings & cylinder walls corrosion free.
NOTE: SHIPS BY UPS GROUND SERVICE ONLY

Stock# 5250028-ORMD
Use injection can with hose to fog Evinrude and Johnson motors 1990 and newer equipped with a maintenance valve. CRC marine engine stor flogging fluid is a oil lubricant that protects outboard motors, marine engines and internal combustion engines.
NOTE: SHIPS BY UPS GROUND SERVICE ONLY

Stock# 5250002-ORMD
A versatile petroleum based compound that forms a clear, thin film that lubricates and protects against wear & corrosion.
NOTE: SHIPS BY UPS GROUND SERVICE ONLY

Stock# 5250011-ORMD
A long term, flexible corrosion inhibitor that protects & preserves metal surfaces, electrical connections, engine components & fasteners, subject to salt spray and high humidity. Also effective for steering & throttle linkages.
NOTE: SHIPS BY UPS GROUND SERVICE ONLY

Stock# 1576167
The Salt Terminator from CRC cleans and protects anything exposed to salt. Made to dissolve salt while leaving a long lasting protective coating. Perfect for boats, PWC's, trailers, fishing tackle, autos, RV's, trucks, tools, motorcycles, atv's, bicycles and much more.

Stock# 5135016-ORMD
Open Gear & Wire Cable spray reduces wear and withstands extreme pressure. Will not wash or weather away.
NOTE: SHIPS BY UPS GROUND SERVICE ONLY

Stock# 5135004-ORMD
Lubrimatic high-viscosity 80w/90 lower unit gear lube protects lower units in ordinary and extreme operating conditions. Special additives included to helps against wear, rust and corrosion.
NOTE: SHIPS BY UPS GROUND SERVICE ONLY

Stock# 5135051-ORMD
POWER-PRO Synthetic Blend Lower Unit Gear Lube. Ideal for modern outboard and stern drive lower units.
NOTE: SHIPS BY UPS GROUND SERVICE ONLY

Stock# 5135023
Ideal for adding oil and other fluids to small engines and marine lower units. Flexible hose for hard-to-reach fill plugs. 4 cc Pump and 3/8"-16 swivel metal marine filler fitting.

Stock# 5135034
The lower unit lube pump adapter is a 8mm x 1.25" thread that fits Yamaha, Tohatsu, Nissan and Honda (2-50 h.p.) lower units.

Stock# 5135011-ORMD
Outboard or I/O power trim and tilt pump fluid for all marine motors. Formulated to provide viscosity and lubricity necessary to ensure proper pump performance and seal life. Combats high operating pressures and resists rust.
NOTE: SHIPS BY UPS GROUND SERVICE ONLY

Stock# 5229214
Provides clean method of emptying oil from inboards and inboard/outboard engines. Fits dipstick tube of engines. Also fits built-in screw fitting on recent inboard/outboard models.

Stock# 5006012
Siphon-Mate® pump is a combination displacement lift pump and siphon pump with valves suitable for transferring Diesel, Oil & Water.

Stock# 5212005
12 volt engine oil change pump with quick connect battery clamp wire and on/off switch. Provides clean method of emptying oil from inboards and inboard/outboard engines. Fits dipstick tube of engines.

Stock# 5308011
Self Priming, 200 GPH pump attaches easily to any electric drill. Changes motor oil, water systems and most other non-flammable fluids. Features include 1/4" Drill Shaft and an 8' to 10' prime draw length.

Stock# 5308012
Self Contained, 3.75 GPM 12 volt pump with a hose kit and 3-1/2 gallon storage container. Changes motor oil, water systems and most other non-flammable fluids.

Stock# 1576169
The Panther fluid extractor is designed to extract fluids from inaccessible or confined areas. Works on boats, cars, motorcycles, outdoor power equipment, industrial machinery.