Hydraulic foundation brake assemblies (backing plate, brake shoes & springs) are available in 10", 12" and 12-1/4" diameters and come ready to bolt to the trailer axle brake mounting flange. A hydraulic trailer brake system consists of one or more pair of foundation brake assemblies, brake drum/hub assemblies, trailer tongue mounted hydraulic brake actuator and a brake line kit. An Electric-Over-Hydraulic Brake Actuator may be used as well. NOTE: Left Hand = Drivers Side & Right Hand = Passenger Side
Stock# 5331183 DEXTER 7" x 1-3/4" Right Hand Uni-Servo complete hydraulic brake assembly. General Duty application. Brake comes completely assembled, ready to bolt to the 4-hole trailer axle brake mounting flange.
Stock# 5331182 DEXTER 7" x 1-3/4" Left Hand Uni-Servo complete hydraulic brake assembly. General Duty application. Brake comes completely assembled, ready to bolt to the 4-hole trailer axle brake mounting flange.
Stock# 7125077 GalvX Hydraulic Free Backing Drum Brakes from Tie Down Engineering features GalvX coated backing plates and brakes shoes as well as stainless steel springs for the most corrosion resistant drum brake. Brake pads are both riveted and bonded to the brake shoes with bronze rivets.
Stock# 7125067 FREE GROUND SHIPPING TO LOWER-48 U.S. Includes:(2) Tie Down Engineering 10" Trailer Free Backing Drum Brakes with GalvX Coated Hydraulic Brakes, Brake Drums, Model 66 Drum Actuator, 20' S.A. Flexible brake line kit.
Stock# 5237100 FREE GROUND SHIPPING TO LOWER-48 U.S. TITAN PREMIER™ Marine Brake assembly featuring the Galphorite™ corrosion-resistant finish. Brake comes completely assembled, ready to bolt to the 4-hole trailer axle brake mounting flange.
Stock# 5237101 FREE GROUND SHIPPING TO LOWER-48 U.S. TITAN PREMIER™ Marine Brake assembly featuring the Galphorite™ corrosion-resistant finish. Brake comes completely assembled, ready to bolt to the 4-hole trailer axle brake mounting flange.
Stock# 1651035 DEMCO 10" x 2-1/4" Free Backing hydraulic brake assembly is designed for a marine application. The brake has a galvanized backing plate, stainless steel spring hardware, and a plated cylinder. The shoes are riveted to the backer and it is a manual adjust system that mounts to a 4 hole brakes flange.
Stock# 1651034 DEMCO 10" 2-1/4" Free Backing hydraulic brake assembly is designed for a marine application. The brake has a galvanized backing plate, stainless steel spring hardware, and a plated cylinder. The shoes are riveted to the backer and it is a manual adjust system that mounts to a 4 hole brakes flange.
Stock# 5331348 DEXTER 10" x 2-1/4" free backing hydraulic brake assembly is designed for a marine application. The brake has a galvanized backing plate, stainless steel spring hardware, and a plated cylinder. The shoes are riveted to the backer and it is a manual adjust system that mounts to a 4 hole brakes flange
Stock# 5331349 DEXTER 10" x 2-1/4" free backing hydraulic brake assembly is designed for a marine application. The brake has a galvanized backing plate, stainless steel spring hardware, and a plated cylinder. The shoes are riveted to the backer and it is a manual adjust system that mounts to a 4 hole brakes flange
Stock# 1651036 DEMCO 12" x 2" Free Backing hydraulic brake assembly is designed for a marine application. The brake has a galvanized backing plate, stainless steel spring hardware, and a plated cylinder. The shoes are riveted to the backer and it is a manual adjust system that mounts to a 5 hole brakes flange
Stock# 1651037 DEMCO 12" x 2" Free Backing hydraulic brake assembly is designed for a marine application. The brake has a galvanized backing plate, stainless steel spring hardware, and a plated cylinder. The shoes are riveted to the backer and it is a manual adjust system that mounts to a 5 hole brakes flange
Stock# 5331350 DEXTER 12" x 2" (7K) free backing hydraulic brake assembly. The shoes are riveted to the backer and it is a manual adjust system that mounts to a 5-hole brake flange.
Stock# 5331351 DEXTER 12" x 2" (7K) free backing hydraulic brake assembly. The shoes are riveted to the backer and it is a manual adjust system that mounts to a 5-hole brake flange.
Stock# 7125078 GalvX Hydraulic Drum Brakes from Tie Down Engineering features GalvX coated backing plates and brakes shoes as well as stainless steel springs for the most corrosion resistant drum brake. Brake pads are both riveted and bonded to the brake shoes with bronze rivets.
Stock# 5331173 12" x 2" Right Hand Uni-Servo complete hydraulic brake assembly. Heavy Duty application. Brake comes completely assembled, ready to bolt to the 5-hole trailer axle brake mounting flange.
Stock# 5331172 12" x 2" Left Hand Uni-Servo complete hydraulic brake assembly. Heavy Duty application. Brake comes completely assembled, ready to bolt to the 5-hole trailer axle brake mounting flange.
Stock# 5331216 DEXTER 12-1/4" x 3-3/8" Left Hand FSA Duo-Servo complete hydraulic brake assembly. Forward Self Adjusting application. Mounts to 4-hole axle brake flange. This brake is rated to a maximum capacity of 8,000 lbs. per pair.
Stock# 1651029 Demco 13" x 2-1/2" free backing hydraulic brake assemblies are designed to fit inside wheels from 16" - 20". The backing plate will mount to a 4-hole brake flange on a 4.183" bolt pattern. Commonly found in agriculture applications.
Stock# 1651028 Demco 13" x 2-1/2" free backing hydraulic brake assemblies are designed to fit inside wheels from 16" - 20". The backing plate will mount to a 4-hole brake flange on a 4.183" bolt pattern. Commonly found in agriculture applications.