RV Fresh Water System Pumps & Fittings

Stock# 5307027
SHURflo’s New Revolution™ fresh water pump design was created with a unique one-piece diaphragm and internal by-pass, assuring long life and top performance in all plumbing systems. The Revolution™ Pump is built for high flow demand, low noise and no rapid cycling. The 4008 Revolution™ fresh water automatic demand pump is super quiet, thermally protected and can run dry without damage. Mounts in any position.

Stock# 5307005
The Shurflo Whisper King™ is the quietest fresh water pump available today. State-of-the-art materials are used in the insulation pad and feet to maximize sound absorption and a specially designed baseplate cradles the motor for superior noise control.

Stock# 5307002
The fresh water pump is specifically designed to provide mid-size RV's with "Just Like Home" flow and pressure to drastically improve the performance of showers, toilets, sinks, washing machines, dish washers, and whole-house filtration units.

Stock# 5307006
The SHURflo nylon accumulator tank will reduce pulsation and pressure spikes, increase the life of your pump and even save battery power.
SUPPLIES LIMITED

Stock# 5308042
Straight polypropylene hex swivel pump fitting.
Fitting Size: 1/2"-14 Female NPT x 1/2" hose barb
SUPPLIES LIMITED

Stock# 5308043
Straight polypropylene hex swivel pump fitting.
Fitting Size: 1/2"-14 Female NPT x 5/8" hose barb

Stock# 5308044
Straight polypropylene hex swivel pump fitting.
Fitting Size: 1/2"-14 Female NPT x 3/4" hose barb

Stock# 5308020
Straight nylon pump fitting adapter. Shurflo part # 8-269-01.
Fitting Size: 1/2"-14 Male NPT x 3/4" hose barb

Stock# 5308040
Straight nylon pump fitting adapter.  Fitting Size: 3/8"-14 Male NPT x 3/8" hose barb
SUPPLIES LIMITED

Stock# 5308041
Straight nylon pump fitting adapter.
Fitting Size: 1/2"-14 Male NPT x 1/2" hose barb

Stock# 5308045
Polypropylene tee barb fitting
Fitting Size: 1/2" Barb x 1/2" Barb x 1/2" Barb

Stock# 5308046
Polypropylene tee fitting  Fitting Size: 1/2" Barb x 1/2" Barb x 3/8" NPT (M)
SUPPLIES LIMITED

Stock# 5307009
Shurflo's Silencing kit connects to the inlet and outlet of your water pump to reduce unwanted pump and plumbing noise. Kit includes two 36" soft tube risers and two 1/2" male connectors for connection to most RV pumps.

Stock# 5307011
Shurflo's combination water regulator and check valve with exclusive Shurflo diaphragm design provides continuous protection from high pressure surges in the city water system. This high performance water entry limits water pressure safely to 65 psi and it includes a check valve.

Stock# 5307012
Shurflo's combination water regulator and check valve with exclusive Shurflo diaphragm design provides continuous protection from high pressure surges in the city water system. This high performance water entry limits water pressure safely to 65 psi and it includes a check valve.

Stock# 5307013
Shurflo's single touch twist faucet is smooth and easy flowing with exceptional durability. Designed for ease-of-use with a water pump or city water system, its the perfect solution to compliment any RV.
SUPPLIES LIMITED

Stock#1609236
Get an extra outside water source right at you RV’s side with this lightweight plastic faucet. Lets your fresh water hose hang without crimping. Can be used as a pressure release valve during disconnection.
Camco part #22463

Stock#1609238
Prevent hose crimping and strain, and extend hose life. 90° brass elbows eliminate unnecessary stress and strain on all RV water intake hose fittings.

Stock#1609239
Prevent hose crimping and strain, and extend hose life. 45° brass elbows eliminate unnecessary stress and strain on all RV water intake hose fittings.
Camco part #22605

Stock#1609240
Coiled attachment eliminates hose crimping at the faucet. Comes complete with Easy Gripper for effortless attachment to the faucet.
Camco part #22703

Stock#1609241
Reduce water pressure to a safe, consistent 40–50 pounds of operational pressure. Protects equipment and prevents hose failure, to help prolong equipment life. ABS plastic fitting with 3/4" Male x Female garden hose thread. Camco part #40143

Stock#1609242
Reduce water pressure to a safe, consistent 40–50 pounds of operational pressure. Protects equipment and prevents hose failure, to help prolong equipment life. Brass fitting with 3/4" Male x Female garden hose thread. Camco part #40055

Stock#1609244
Helps protect RV plumbing and hoses from damage caused by high-pressure city water. Attaches easily with convenient 3/4" garden hose threads. Easy to read dial. Pressure is factory pre-set at 40-50 PSI. Camco part #40064

Stock# 1609245
Allows fluid to only flow in one direction. Prevents backflow.
Heavy duty brass body with stainless spring. (1/2" FPT x MPT) Camco part #23303

Stock#1609243
This versatile connector includes a built-in one-piece flow-through flexible washer. Recommended for connecting damaged hose couplings and for new hoses to protect hose threads. Fits male or female end of a 3/4" garden hose. Camco part #20213
SUPPLIES LIMITED

Stock# 1609246
Filter trash and debris from your water system. Washer fits any standard garden hose female coupling. Stainless steel 60x50 mesh traps dirt particles before they enter your RV system.
Camco part #20183

Stock# 1609247
Stop your garden hose from leaking at the faucet and hose connections. Self-locking tabs prevent loss of washer when hose is disconnected.
Camco part #20153

Stock# 1609248
Sturdy plastic quick connect with convenient built-in shut-off valve allows you to attach hoses quickly and easily. For RV or residential hook-ups.
Camco part #20103

Stock# 1609249
Brass quick connect with convenient built-in auto shut-off valve allows you to attach hoses quickly and easily. For RV or residential hook-ups

Stock# 1609743
Brass quick connect with convenient built-in auto shut-off valve allows you to attach hoses quickly and easily. For RV or residential hook-ups. The value pack comes with (1) male end to attach to water source and (3) Female ends to attach to accessories.

Stock# 1609252
Control water flow with a quarter-turn pressure seated valve. Valve is controlled to easily adjust flow and pressure.
Camco part #20003

Stock# 1609251
Control water flow with a quarter-turn pressure seated valve. Y-style converts a single-line hose to two directions. Each side is valve controlled to easily adjust flow and pressure.
Camco part #20073

Stock# 1609250
Control water flow with a quarter-turn pressure seated valve. Y-style converts a single-line hose to two directions. Each side is valve controlled to easily adjust flow and pressure.
Camco part #20113

Stock# 1609253
Solid brass housing with non-corrosive stainless steel quarter-turn pressure seated shut-off valve. Features easy-grips valve handle and hose connection.
Camco part #20123

Stock#1609254
Solid brass housing with non-corrosive stainless steel quarter-turn pressure seated shut-off valve. Features easy-grips valve handle and hose connection.
Camco part #20173

Stock# 1609255
Super heavy duty hoses are reinforced for maximum kink resistance. Especially useful when hooked with a Y-valve to your main faucet. Drinking water safe. (1/2" x 25')
Camco part #22733

Stock# 1609256
Super heavy duty hoses are reinforced for maximum kink resistance. Especially useful when hooked with a Y-valve to your main faucet. Drinking water safe. (1/2" x 10')
Camco part #22743

Stock# 1609257
Super heavy duty hoses are reinforced for maximum kink resistance. Especially useful when hooked with a Y-valve to your main faucet. Drinking water safe. (1/2" x 4')
Camco part #22763

Stock# 1609635
Heavy duty hoses are 20% thicker than standard hoses and kink resistance. Machined fittings and strain-relief ends give added durability.  Drinking water safe. (5/8" x 25')
Camco part #22833

Stock# 1609636
Heavy duty hoses are 20% thicker than standard hoses and kink resistance. Machined fittings and strain-relief ends give added durability.  Drinking water safe. (5/8" x 50')
Camco part #22853

Stock#1609258
Complete drain system designed especially for campers and RVs. Drain trap is made of durable, chemical resistant polypropylene. Evacuation flange is made of durable ABS construction with UV stabilizers.
Camco part #37420

Stock#1609259
Camper drain trap is designed especially for campers and RVs. Made of durable, chemical resistant polypropylene. Barbed for 3/4" ID hose.
Camco part #37262

Stock#1609260
Durable ABS construction with UV stabilizers. Barbed for 3/4" ID hose. Use with camper drain trap for a complete drain system.
Camco part #37271

Stock#1609261
Easily drain your RV fresh water tank. Dual drain valve without flange, is graduated for use with 1/2" or 3/4" vinyl tubing. Durable plastic construction.
Camco part #22243

Stock#1609262
Easily drain your RV fresh water tank. Dual drain valve with flange, is graduated for use with 1/2" or 3/4" vinyl tubing. Durable plastic construction.
Camco part #22223

Stock#1609263
Replacement 3/4" hose plugs keeps dust and dirt out of your water system. Includes an easily attached lanyard to help prevent the loss of your plug.
Camco part #22103

Stock#1609264
Replacement 3/4" hose cap keeps dust and dirt out of your water system. Includes an easily attached lanyard to help prevent the loss of your plug.
Camco part #22204

Stock#1609267
Replace your cracked or broken RV water fill with an original replacement part. Durable colonial white plastic construction—will not rust or corrode.
Camco part #37221

Stock#1609268
Fill spout with door is designed with a loop and slot for pin or lock to ensure secure closure. Colonial white. Door is spring loaded with a snap-shut design.
Camco part #37102

Stock#1609269
Flush mount fill spout is designed to mount flush with RV side. Top-fill door is secured with sliding lock. Colonial white.
SUPPLIES LIMITED

Stock#1609270
Water tank fillers allow you to fill your water tank in a fraction of the usual time and eliminate “bubble-back.“ Quarter-turn pressure-sealed valve allows you to selectively control water flow.
Camco part #40003

Stock#1609271
Fill your water tank in a fraction of the usual time and eliminate “bubble-back.“ Large 5/8" fill tube allows you to fill your camper, trailer or motor home water tank at or near full pressure while minimizing line backflow. Camco part #40023

Stock#1609272
Non-kinking ten foot by 1-1/4" diameter hose for connecting a fill spout or city water fill to a water tank. FDA non-toxic formulation, IAPMO® TSC 31-90 and TSC 7-90 compliant.
Camco part #36601

Stock# 5307003
SHURflo's Extreme™ Series Strainer keeps your Smart Sensor™ 5.7 pump flowing smooth and strong. Protects your pump by straining debris particles that can be trapped in the water storage tank.
These strainers are engineered to compliment the higher flow rating of the Extreme™ Series Smart Sensor™ 5.7 pump.

Stock# 5307007
SHURflo's Classic™ Series Strainer keeps your Smart Sensor™ 4.0 or Classic™ Series pump flowing smooth and strong. Protects your pump by straining debris particles that can be trapped in the water storage tank.

Stock# 5307008
SHURflo's Classic™ Series Strainer keeps your Smart Sensor™ 4.0 or Classic™ Series pump flowing smooth and strong. Protects your pump by straining debris particles that can be trapped in the water storage tank.

Stock# 5307017
The Waterguard™ Super Premium Two-Stage Garden Hose In-Line Water Filter uses only the highest quality KDF media and water washed coconut shell carbon to provide you with crisp, clean and safe drinking water.

Stock# 5307018
Waterguard™ 10" filter housing kit provides hassle-free bottled water quality for only pennies per gallon. This easy installation kit includes cartridge (RV-10C1), wrench, mounting hardware, m/f garden hose fittings and a 12" garden hose.
SUPPLIES LIMITED

Stock# 1609230
Larger capacity filter lasts an entire season. Greatly reduces bad taste, odors, chlorine and sediment in drinking water with a 100 micron fiber filter. Durable in-line, exterior mount filter has a wider body to increase flow. Camco part #40043

Stock# 1609231
Each larger capacity filter lasts an entire season. Greatly reduces bad taste, odors, chlorine and sediment in drinking water with two 100 micron fiber filters.
(Filters Only) Camco part #40045

Stock# 1609702
High Flow 5.0 micron premium replacement cartridge for Camco's Evo Water Filter housing. Reduces bad taste, odors, sediment, bacteria, chlorine and much more. Camco part #40624

Stock# 1609234
Clean, deodorize and dewinterize your entire fresh water system the easy way. Use for major cleaning of the fresh water tank and system before re-activating for use. One tablet per 15 gallons of tank capacity. Camco part #40193
Note: Not available to the state of Florida

Stock# 1609235
Stand allows you to hold your water filter upright and off the ground. Foot bar makes it easier to secure the stand in the ground. Lightweight. Zinc coated to inhibit rust.
Camco part #40772
SUPPLIES LIMITED

Stock# 5307010
Replacement pump head for the 2088 series of pumps can easily be repaired in just minutes by removing the old pump head and sliding the new head on. Includes easy to follow instructions.

Stock# 5307014
The Everpure® RV / Marine Water Treatment System uses a Superchlorination/Dechlorination process to disinfect your RV water system and can protect you from waterborne bacteria, viruses, mold and algae. Exclusive Micro-Pure filter considerably reduces the taste and odor of chlorine, dirt and more.
SUPPLIES LIMITED

Stock# 5307016
Waterguard™ 10" Long-life water-washed coconut shell carbon eliminates odor and taste and reduces chlorine. One year warranty. Cartridge filters up to 7,000 gallons and has a 1.5 gpm maximum flow rate.

Stock# 1582141
Specially designed for waste or water tank applications. Each tank is manufactured from rotationally molded, cross-linked polyethylene plastic that will not filter taste into water or emit waste odors.
Size: 11.75" L x 10.25" W x 9.25" H

Stock# 1582142
Specially designed for waste or water tank applications. Each tank is manufactured from rotationally molded, cross-linked polyethylene plastic that will not filter taste into water or emit waste odors.
Size: 16.00" L x 11.75" W x 8.00" H

Stock# 1582143
Specially designed for waste or water tank applications. Each tank is manufactured from rotationally molded, cross-linked polyethylene plastic that will not filter taste into water or emit waste odors.
Size: 17.00" L x 13.75" W x 10.25" H

Stock# 1582144
Specially designed for waste or water tank applications. Each tank is manufactured from rotationally molded, cross-linked polyethylene plastic that will not filter taste into water or emit waste odors.
Size: 24.25" L x 15.25" W x 8.75" H

Stock# 1582145
Specially designed for waste or water tank applications. Each tank is manufactured from rotationally molded, cross-linked polyethylene plastic that will not filter taste into water or emit waste odors.
Size: 21.00" L x 17.00" W x 14.00" H

Stock# 1582147
Specially designed for waste or water tank applications. Each tank is manufactured from rotationally molded, cross-linked polyethylene plastic that will not filter taste into water or emit waste odors.
Size: 29.50" L x 16.63" W x 12.75" H

Stock# 1582148
Specially designed for waste or water tank applications. Each tank is manufactured from rotationally molded, cross-linked polyethylene plastic that will not filter taste into water or emit waste odors.
Size: 23.50" L x 20.00" W x 15.50" H

Stock# 1582149
Specially designed for waste or water tank applications. Each tank is manufactured from rotationally molded, cross-linked polyethylene plastic that will not filter taste into water or emit waste odors.
Size: 28.00" L x 23.00" W x 11.50" H

Stock# 1582150
Specially designed for waste or water tank applications. Each tank is manufactured from rotationally molded, cross-linked polyethylene plastic that will not filter taste into water or emit waste odors.
Size: 32.00" L x 21.50" W @Top x 19.75" W @Bottom x 14.50" H

Stock# 1582151
Specially designed for waste or water tank applications. Each tank is manufactured from rotationally molded, cross-linked polyethylene plastic that will not filter taste into water or emit waste odors.
Size: 35.25" L x 20.88" W x 15.25" H

Stock# 1582152
Specially designed for waste or water tank applications. Each tank is manufactured from rotationally molded, cross-linked polyethylene plastic that will not filter taste into water or emit waste odors.
Size: 35.62" L x 23.25" W x 22.81" H

Stock# 1582153
Straight Pipe-to-Hose Kit. Each kit contains parts required to attach hoses to waste tanks: (2) 1/2 NPT x 1/2" Barb (2) 1-1/2 NPT x 1-1/2" Barbs (1) 1-1/2" MNPT x 1/2" FNPT Reducer and thread-seal tape. Moeller Part# 041311

Stock# 1582154
90° Pipe-to-Hose Kit. Each kit contains parts required to attach hoses to waste tanks: (1) 1/2 NPT x 1/2" Barb (2) 1-1/2 NPT x 1-1/2" Barbs and thread-seal tape. Moeller Part# 041390

Stock# 1623001
Easy installation makes this a great add-on unit as well as a replacement for all OEM units. The updated design also keeps the shower hose inside the hatch rather than feeding it into the RV, which also increases the possibilities for installation.

Stock#1623002
Durable plastic valve is designed for multiple uses and built to last. The dual size barbed fittings make choosing the right size a snap and the 2" mounting flange helps provide a good seal.

Stock#1623003
This strainer and stopper is a perfect replacement for any tub or sink. Built of plastic, it replaces any 2" drain and comes with a new screw-in plastic stopper.

Stock#1623004
Tub Strainer, Stopper, Rubber Washer & Slip Nut is a perfect replacement for any tub or sink. Built of plastic, it replaces any 2" drain and comes with a new screw-in plastic stopper.

Stock#1623005
Original replacement for most gravity style fresh water fills. Spout is barbed for easy replacement and will accept either 1-1/4" or 1-3/8" water fill hose.

Stock#1623006
Replacement check valve for all new hatches. Check valve is complete with new hose connector with four raised thumb grips for easier connections. Fitting is 1/2" M.P.T.

Stock#1623007
Gravity Water Fill Made of durable plastic for long life. Plastic will not fade or discolor and resists UV rays and road salts or acids. Easy installation with three screws and comes with a cap, strap and spout. Dish has a 1/2" screened air vent for better water filling.

Stock#1623008
This original manufacturer's city water fill will replace any dish type water fill with a 3-1/2" opening. Brass check valve has a 1/2" M.P.T. fitting. Dish is constructed of durable plastic for a long life. Will not discolor or fade and is impact resistant.

Stock#1623009
Water fill center comes with both city and gravity fills and is built for convenience. No doors or locks and mounts in a low profile setting. Easy installation and comes with a replaceable plastic city water fill check valve. Built with a 1/2" screened air vent to make filling your fresh water easier.

Stock#1623010
Connect-It-Tight makes tightening your city water line quick and easy. Finally an end to leaking water connections. With its large grip points and a hardened rubber compound, this product will help you get a tight connection to your water hose. You can also use this on any standard female collar water hose connection.

Stock#1623011
The easy to use threaded basket is great for kitchen and lavatory sinks. The basket is designed for a sure seal but can be loosened to drain the sink while keeping items from entering your drain.
Includes: Strainer, Basket, Rubber Washer and Locknut

Stock#1623012
The easy to use threaded basket is great for kitchen and lavatory sinks. The basket is designed for a sure seal but can be loosened to drain the sink while keeping items from entering your drain.
Includes: Strainer, Basket, Tail Flange, Slipnut, Rubber Washer and Locknut

Stock# 1576143
Elbow polypropylene hex swivel pump fitting.
Fitting Size: 1/2"-14 Female NPT x 1/2" hose barb

Stock#1623014
All purpose shower strainer is the perfect replacement for any area where a plug is not needed. The steel grid keeps items from entering your plumbing system and is easily cleaned. The grid is removable if access is needed to the plumbing.
Includes: Strainer, Grid, Slipnut, Rubber Washer, Plastic Washer and Locknut

Stock# 1576142
Elbow polypropylene hex swivel pump fitting.
Fitting Size: 1/2"-14 Female NPT x 5/8" hose barb

Stock#1623015
City water flange comes with a die cast steel flange for secure mounting. Combined with a chrome plated finish and stainless steel mounting screws for a great look and durability. This will replace most steel flanged units.

Stock# 1576141
Elbow polypropylene hex swivel pump fitting.
Fitting Size: 1/2"-14 Female NPT x 3/4" hose barb