Carry-ON Factory Utility Trailer Parts at Trailer Parts Superstore
My Cart (0)
Phone Sales & Technical Support
Mon - Thur 8am-6pm
Fri - Sat 8am-5pm

1-800-453-7379

CARRY-ON Factory Trailer Parts

Carry-On Trailer Parts
Carry-On Trailers are American Owned and American Built. They are the number one trailer builder by volume. Carry-On has corporate headquarters in Lavonia, Georgia and 7 manufacturing facilities strategically located throughout the country. They offer utility, cargo, horse, livestock, and specialty trailers.Carry-On trailers meet or exceed all government regulations and are compliant with standards set by our trade organization, the National Association of Trailer Manufacturers. Trailer Parts Superstore now offers a variety of direct factory replacement trailer parts for Carry-On Trailers, direct from Carry-On.

CARRY-ON Trailer Parts Listed By Manufacturers O.E.M. Part Numbers

Quantity Description Price

CARRY-ON 1" Bearing Kit #501

CARRY-ON 1" Bearing Kit #501

Stock# 7115066
Carry-On Tapered Roller Bearing Kit for 1250 lb. rated hub assemblies. Kit Includes: 2 bearings, 2 races, 1 seal (1.25" ID), cotter pin.

$14.99

CARRY-ON 1-1/16" x 1-1/16" Bearing Kit #500

CARRY-ON 1-1/16" x 1-1/16" Bearing Kit #500

Stock# 7115065
Carry-On Tapered Roller Bearing Kit for 1250 lb. rated hub assemblies. Kit Includes: 2 bearings, 2 races, 1 seal (1.25" ID), cotter pin.

$15.99

CARRY-ON 1-3/8" x 1-1/16" Bearing Kit #502

CARRY-ON 1-3/8" x 1-1/16" Bearing Kit #502

Stock# 7115067
Carry-On Tapered Roller Bearing Kit for 1750 lb. rated hub assemblies. Kit Includes: 2 bearings, 2 races, 1 seal (1.719" ID), cotter pin.

$14.99

CARRY-ON Castle Nut Kit for 1-1/16" Spindles #643

CARRY-ON Castle Nut Kit for 1-1/16" Spindles #643

Stock# 7115151
The Carry-On castle nut kit includes: (1) 1" - 14 Nut , (1) 1" ID Washer and (1) 1/8-2" Cotter Pin. Designed to be used with Carry-On 1-1/16" spindles.

$5.85

CARRY-ON Grease Seal 1.25" ID x 1.983" OD #494

CARRY-ON Grease Seal 1.25" ID x 1.983" OD #494

Stock# 7115059
Carry-On Grease Seal, 1.25" ID x 1.983" OD is commonly found on axles with a 1" or 1-1/16" spindle diameter on the bearing surface. Double Lip, Spring Loaded seals provides superior protection against dirt and water intrusion.

$6.99

CARRY-ON Grease Seal 1.5" ID x 1.987" OD #495

CARRY-ON Grease Seal 1.5" ID x 1.987" OD #495

Stock# 7115060
Carry-On Grease Seal, 1.5" ID x 1.987" OD is commonly found on 2000 lbs. axles with a 1" or 1-1/16" spindle diameter on the bearing surface. Double Lip, Spring Loaded seals provides superior protection against dirt and water intrusion.

$5.50

CARRY-ON Grease Seal 1.719" ID x 2.567" OD #496

CARRY-ON Grease Seal 1.719" ID x 2.567" OD #496

Stock# 7115061
Carry-On Grease Seal, 1.719" ID x 2.567" OD is commonly found on axles with a 1-3/8" x 1-1/16" spindle diameter on the bearing surface. Double Lip, Spring Loaded seals provides superior protection against dirt and water intrusion.

$7.99

CARRY-ON Trailer Axle Spindle for 1" Straight Wheel Bearings #152

CARRY-ON Trailer Axle Spindle for 1" Straight Wheel Bearings #152

Stock# 7115022
  1250lb. capacity (each) round stock trailer axle spindle for 1" x 1" wheel bearing sizes.
Each spindle is turned from high tensile, cold rolled steel which increases the hardness and strength of the metal. 100% quality control checked for accuracy. Includes nut, washer & cotter pin.

$17.95

CARRY-ON Trailer Axle Spindle for 1-1/16" Straight Wheel Bearings #151

CARRY-ON Trailer Axle Spindle for 1-1/16" Straight Wheel Bearings #151

Stock# 7115021
1250 lb. capacity (each) round stock trailer axle spindle for 1-1/16" x 1-1/16" wheel bearing sizes.
Each spindle is turned from high tensile, cold rolled steel which increases the hardness and strength of the metal. 100% quality control checked for accuracy. Includes nut, washer & cotter pin.

$17.95

CARRY-ON Trailer Axle Spindle for 1-3/8" x 1-1/16" Wheel Bearings #350

CARRY-ON Trailer Axle Spindle for 1-3/8" x 1-1/16" Wheel Bearings #350

Stock# 7115036
1750 lb. capacity (each) round stock trailer axle spindle for 1-3/8" x 1-1/16" wheel bearing sizes.
Each spindle is turned from high tensile, cold rolled steel which increases the hardness and strength of the metal. 100% quality control checked for accuracy. Includes nut, washer & cotter pin.

$26.95

CARRY-ON 1/2"-20 Press-In Wheel Stud Kit #522

CARRY-ON 1/2"-20 Press-In Wheel Stud Kit #522

Stock# 7115082
The Carry-On press-in wheel stud kit includes (4) 2.02" long, 1/2" - 20 UNF press-In wheel studs with a knurl diameter of .536". Fits most 2000 lb and 3500 lb. Carry-On hubs.

$6.99

CARRY-ON 1/2" Lug Bolts, (5 pack) #512

CARRY-ON 1/2" Lug Bolts, (5 pack) #512

Stock# 7115075
Carry-On Zinc plated 1/2"-20 tapered lug bolts (5-pack) for threaded trailer wheel hubs, brake drums or disc brake rotors.

$6.49

CARRY-ON 1/2" Lug Nuts, (5 pack) #509

CARRY-ON 1/2" Lug Nuts, (5 pack) #509

Stock# 7115073
Carry-On Zinc plated lug nut with a 60 degree cone, 1/2"-20 thread, and 13/16" head. For studded trailer wheel hubs, brake drums or disc brake rotors. Sold as 5 pack.

$4.99

CARRY-ON Dust Caps, 1.98" O.D. (1 pair) #120

CARRY-ON Dust Caps, 1.98" O.D. (1 pair) #120

Stock# 7115001
Carry-On metal dust caps have a 1.98" O.D. and are sold in pairs.

$6.59

CARRY-ON Dust Caps, 2.441" O.D. (1 pair) #121

CARRY-ON Dust Caps, 2.441" O.D. (1 pair) #121

Stock# 7115002
Carry-On metal dust caps have a 2.441" O.D. and are sold in pairs.

$7.29

CARRY-ON Dust Caps, 2.75" O.D. (1 pair) #122

CARRY-ON Dust Caps, 2.75" O.D. (1 pair) #122

Stock# 7115003
Carry-On metal dust caps have a 2.75" O.D. and are sold in pairs.

$8.99

CARRY-ON 1.781" Bearing Protector, (1 Pair) #497

CARRY-ON 1.781" Bearing Protector, (1 Pair) #497

Stock# 7115062
Easily add bearing grease to the wheel hub to maintain proper lubrication and provide corrosion protection. Made of chrome plated steel.

$24.95

CARRY-ON 1.98" Bearing Protector, (1 Pair) #498

CARRY-ON 1.98" Bearing Protector, (1 Pair) #498

Stock# 7115063
Easily add bearing grease to the wheel hub to maintain proper lubrication and provide corrosion protection. Made of chrome plated steel.

$26.50

CARRY-ON 2.328" Bearing Protector, (1 Pair) #499

CARRY-ON 2.328" Bearing Protector, (1 Pair) #499

Stock# 7115064
Easily add bearing grease to the wheel hub to maintain proper lubrication and provide corrosion protection. Made of chrome plated steel.

$31.50

CARRY-ON 1" Bearing, 4 on 4" Stud Wheel Hub (1250 Lb) Kit #153

CARRY-ON 1" Bearing, 4 on 4" Stud Wheel Hub (1250 Lb) Kit #153

Stock# 7115023
The Carry-On 4-lug hub kit includes: 1 hub, bearings, grease seal, dust cap and lug nuts. Cast Iron hub is rated for 1250 lb. capacity.

$33.50

CARRY-ON 1" Bearing, 5 on 4-1/2" Stud Wheel Hub (1250 Lb) Kit #154

CARRY-ON 1" Bearing, 5 on 4-1/2" Stud Wheel Hub (1250 Lb) Kit #154

Stock# 7115024
The Carry-On 5-lug hub kit includes: 1 hub, bearings, grease seal, dust cap and lug nuts. Cast Iron hub is rated for 1250 lb. capacity.

$34.95

CARRY-ON 1-1/16" Bearing, 4 on 4" Stud Wheel Hub (1250 Lb) Kit #150

CARRY-ON 1-1/16" Bearing, 4 on 4" Stud Wheel Hub (1250 Lb) Kit #150

Stock# 7115020
The Carry-On 4-lug hub kit includes: 1 hub, bearings, grease seal, dust cap and lug nuts. Cast Iron hub is rated for 1250 lb. capacity.

$31.95

CARRY-ON 1-1/16" Bearing, 5 on 4-1/2" Stud Wheel Hub (1250 Lb) Kit #155

CARRY-ON 1-1/16" Bearing, 5 on 4-1/2" Stud Wheel Hub (1250 Lb) Kit #155

Stock# 7115025
The Carry-On 5-lug hub kit includes: 1 hub, bearings, grease seal, dust cap and lug nuts. Cast Iron hub is rated for 1250 lb. capacity.

$35.99

CARRY-ON 1-3/8" x 1-1/16" Bearing, 5 on 4-1/2" Hub Kit (1750 Lb) #545

CARRY-ON 1-3/8" x 1-1/16" Bearing, 5 on 4-1/2" Hub Kit (1750 Lb) #545

Stock# 7115083
The Carry-On 5-lug hub kit includes: 1 hub, bearings, grease seal, dust cap and lug nuts. Cast Iron hub is rated for 1750 lb. capacity.

$46.50

CARRY-ON 10" x 2-1/4" Brake Drum, Pair, 5 on 4.5" #605

CARRY-ON 10" x 2-1/4" Brake Drum, Pair, 5 on 4.5" #605

Stock# 7115171
5 Studs on 4-1/2" Bolt Circle Trailer Brake Drum designed for 3.5K axles. Includes lug nuts and grease cap.

$95.00

CARRY-ON Trailer Axle (2K) Factory OEM, 60" H.F. / 47.25" S.C.

CARRY-ON Trailer Axle (2K) Factory OEM, 60" H.F. / 47.25" S.C.

Stock# 7115084
Factory OEM trailer axle made by Dexter Axle and designed for use with Carry-On utility & cargo trailers. Pre-welded axle spring seats are designed to face downward for an under slung leaf spring mount. Black powder coated axle tube includes a 1 degree camber bend per side. Hubs sold separately. Overall Length = 63.25"  Hub Face = 60"  Spring Center = 47.25"  

$129.00

CARRY-ON Straight Trailer Axle 2K with Idler Hubs 51" H.F. / 40" S.C.

CARRY-ON Straight Trailer Axle 2K with Idler Hubs 51" H.F. / 40" S.C.

Stock# 7115031
Carry-On trailer axle designed specifically for use with Carry-On utility trailers. Axle weldment includes, welded spring seats, and idler hubs (5 on 4.5" bolt pattern).
Overall Length = 55-3/4"  Hub Face = 51"  Spring Center = 40"

$105.00

CARRY-ON Straight Trailer Axle 2K with Idler Hubs 54" H.F. / 42" S.C.

CARRY-ON Straight Trailer Axle 2K with Idler Hubs 54" H.F. / 42" S.C.

Stock# 7115032
Carry-On trailer axle designed specifically for use with Carry-On utility trailers. Axle weldment includes, welded spring seats, and idler hubs (5 on 4.5" bolt pattern).
Overall Length = 58-3/4"  Hub Face = 54"  Spring Center = 42"

$105.00

CARRY-ON Straight Trailer Axle 2K with Idler Hubs 60" H.F. / 47" S.C.

CARRY-ON Straight Trailer Axle 2K with Idler Hubs 60" H.F. / 47" S.C.

Stock# 7115033
Carry-On trailer axle designed specifically for use with Carry-On utility trailers. Axle weldment includes, welded spring seats, and idler hubs (5 on 4.5" bolt pattern).
Overall Length = 64-3/4"  Hub Face = 60"  Spring Center = 47"

$114.00

CARRY-ON Straight Trailer Axle 2K with Idler Hubs 71" H.F. / 58" S.C.

CARRY-ON Straight Trailer Axle 2K with Idler Hubs 71" H.F. / 58" S.C.

Stock# 7115035
Carry-On trailer axle designed specifically for use with Carry-On utility trailers. Axle weldment includes, welded spring seats, and idler hubs (5 on 4.5" bolt pattern).
Overall Length = 75-3/4"  Hub Face = 71"  Spring Center = 58"

$119.00

CARRY-ON Straight Trailer Axle 3.5K with Idler Hubs 72" H.F. / 58" S.C.

CARRY-ON Straight Trailer Axle 3.5K with Idler Hubs 72" H.F. / 58" S.C.

Stock# 7115042
Carry-On Factory OEM trailer axle designed for use with Carry-On utility & cargo trailers.  Axle is complete and includes pre-installed 5 lug hubs. Pre-welded axle spring seats are designed to face downward for an under slung leaf spring mount. Black powder coated axle tube includes a 1 degree camber bend per side.
Overall Length = 77"  Hub Face = 72"  Spring Center = 58"

$140.00

CARRY-ON Straight Trailer Axle 3.5K with Idler Hubs 77" H.F. / 64" S.C.

CARRY-ON Straight Trailer Axle 3.5K with Idler Hubs 77" H.F. / 64" S.C.

Stock# 7115043
Carry-On Factory OEM trailer axle designed for use with Carry-On utility & cargo trailers.  Axle is complete and includes pre-installed 5 lug hubs. Pre-welded axle spring seats are designed to face downward for an under slung leaf spring mount. Black powder coated axle tube includes a 1 degree camber bend per side.
Overall Length = 82"  Hub Face = 77"  Spring Center = 64"

$149.00

CARRY-ON Straight Trailer Axle 3.5K with Idler Hubs 84" H.F. / 70" S.C.

CARRY-ON Straight Trailer Axle 3.5K with Idler Hubs 84" H.F. / 70" S.C.

Stock# 7115047
Carry-On Factory OEM trailer axle designed for use with Carry-On utility & cargo trailers.  Axle is complete and includes pre-installed 5 lug EZ-lube hubs. Pre-welded axle spring seats are designed to face downward for an under slung leaf spring mount. Black powder coated axle tube includes a 1 degree camber bend per side.
Overall Length = 89"  Hub Face = 84"  Spring Center = 70"

$149.00

CARRY-ON Straight Trailer Axle 3.5K with Idler Hubs 88" H.F. / 74" S.C.

CARRY-ON Straight Trailer Axle 3.5K with Idler Hubs 88" H.F. / 74" S.C.

Stock# 7115051
Carry-On Factory OEM trailer axle designed for use with Carry-On utility & cargo trailers.  Axle is complete and includes pre-installed 5 lug hubs. Pre-welded axle spring seats are designed to face downward for an under slung leaf spring mount. Black powder coated axle tube includes a 1 degree camber bend per side.
Overall Length = 93"  Hub Face = 88"  Spring Center = 74"

$158.00

CARRY-ON Straight Trailer Axle 3.5K with Idler Hubs 93" H.F. / 80" S.C.

CARRY-ON Straight Trailer Axle 3.5K with Idler Hubs 93" H.F. / 80" S.C.

Stock# 7115055
Carry-On Factory OEM trailer axle designed for use with Carry-On utility & cargo trailers.  Axle is complete and includes pre-installed 5 lug hubs. Pre-welded axle spring seats are designed to face downward for an under slung leaf spring mount. Black powder coated axle tube includes a 1 degree camber bend per side.
Overall Length = 98"  Hub Face = 93"  Spring Center = 80"

$166.00

CARRY-ON Straight Trailer Axle 3.5K with Idler Hubs 93" H.F. / 80" S.C.

CARRY-ON Straight Trailer Axle 3.5K with Idler Hubs 93" H.F. / 80" S.C.

Stock# 7115057
Carry-On Factory OEM trailer axle designed for use with Carry-On utility & cargo trailers.  Axle is complete and includes pre-installed 5 lug EZ-lube hubs. Pre-welded axle spring seats are designed to face downward for an under slung leaf spring mount. Black powder coated axle tube includes a 1 degree camber bend per side.
Overall Length = 98"  Hub Face = 93"  Spring Center = 80"

$166.00

CARRY-ON Drop Trailer Axle 3.5K with Idler Hubs 84" H.F. / 70" S.C.

CARRY-ON Drop Trailer Axle 3.5K with Idler Hubs 84" H.F. / 70" S.C.

Stock# 7115050
Carry-On Factory OEM trailer axle designed for use with Carry-On utility & cargo trailers.  Axle is complete and includes pre-installed 5 lug EZ-lube hubs. Pre-welded axle spring seats are designed to face downward for an under slung leaf spring mount. Black powder coated axle tube includes a 1 degree camber bend per side.
Overall Length = 89"  Hub Face = 84"  Spring Center = 70"

$173.00

CARRY-ON Drop Trailer Axle 3.5K with Idler Hubs 93" H.F. / 76" S.C.

CARRY-ON Drop Trailer Axle 3.5K with Idler Hubs 93" H.F. / 76" S.C.

Stock# 7115054
Carry-On Factory OEM trailer axle designed for use with Carry-On utility & cargo trailers.  Axle is complete and includes pre-installed 5 lug EZ-lube hubs. Pre-welded axle spring seats are designed to face downward for an under slung leaf spring mount. Black powder coated axle tube includes a 1 degree camber bend per side.
Overall Length = 98"  Hub Face = 93"  Spring Center = 76"

$190.00

CARRY-ON Straight Trailer Axle 3.5K w/Electric Brakes 88" H.F. / 74" S.C.

CARRY-ON Straight Trailer Axle 3.5K w/Electric Brakes 88" H.F. / 74" S.C.

Stock# T7115052
CARRY-ON trailer axle designed specifically for use with Carry-On utility and enclosed trailers. Hub Face = 88"
Spring Center = 74.5"   Brakes = Electric.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck Truck Freight Shipping Information for details)

$323.00

CARRY-ON Straight Trailer Axle 3.5K w/Electric Brakes 93" H.F. / 80" S.C.

CARRY-ON Straight Trailer Axle 3.5K w/Electric Brakes 93" H.F. / 80" S.C.

Stock# T7115056
CARRY-ON trailer axle designed specifically for use with Carry-Onutility and enclosed trailers. Hub Face = 93"
Spring Center = 80"   Brakes = Electric.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck Truck Freight Shipping Information for details)

$367.00

CARRY-ON Drop Trailer Axle 3.5K w/Electric Brakes 84" H.F. / 70" S.C.

CARRY-ON Drop Trailer Axle 3.5K w/Electric Brakes 84" H.F. / 70" S.C.

Stock# T7115049
CARRY-ON trailer axle designed specifically for use with Carry-On utility and enclosed trailers. Hub Face = 84"
Spring Center = 70"   Brakes = Electric.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck Truck Freight Shipping Information for details)

$323.00

CARRY-ON Drop Trailer Axle 3.5K w/Electric Brakes 93" H.F. / 76" S.C.

CARRY-ON Drop Trailer Axle 3.5K w/Electric Brakes 93" H.F. / 76" S.C.

Stock# T7115053
CARRY-ON trailer axle designed specifically for use with Carry-On utility and enclosed trailers. Hub Face = 93"
Spring Center = 76"   Brakes = Electric.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck Truck Freight Shipping Information for details)

$346.00

CARRY-ON 10" Electric Brake Magnet Kit (Green Wire) #617

CARRY-ON 10" Electric Brake Magnet Kit (Green Wire) #617

Stock# 7115172
Carry-On 10" x 2-1/4" Magnet kit includes (1) magnet assembly, clip & spring.
Fits 10" diameter 3,500 lbs. capacity electric brakes.

$32.95

CARRY-ON Weld-On Brake Flange for 3.5K Round Tube Axles #147

CARRY-ON Weld-On Brake Flange for 3.5K Round Tube Axles #147

Stock# 7115017
The weld-on 4 bolt brake flange fits most 2-3/8" round axles with 3500 lb. capacities. Flange will accept standard 10" x 2-1/4" brake assemblies and 10" disc brakes.
Measurements: Center hole: 2-1/4"  Height: 3-3/4"  Width: 3-3/4"  Hole Centers = 2-7/8" (Sold in pairs)

$9.95

CARRY-ON 20-3/8" Double Eye Leaf Spring (2 leaves / 1000 lb.) #629

CARRY-ON 20-3/8" Double Eye Leaf Spring (2 leaves / 1000 lb.) #629

Stock# 7115095
The CARRY-ON factory OEM 20-3/8" 2 leaf double eye leaf spring is direct replacement spring for Carry-On utility Trailers.  Measures 1-3/4" wide and has a 1000 lb. capacity per spring. Each spring includes a  9/16" I.D. nylon bushings.

$26.50

CARRY-ON 25-1/4" Double Eye Leaf Spring, (3 Leaves) #504

CARRY-ON 25-1/4" Double Eye Leaf Spring, (3 Leaves) #504

Stock# 7115068
Carry-On 1-3/4" wide trailer leaf springs constructed with heavy duty spring steel. 1750 lbs. capacity. Sold as each.

$38.95

CARRY-ON 25-1/4" Double Eye Leaf Spring (5 leaves / 2500 lb.) #353

CARRY-ON 25-1/4" Double Eye Leaf Spring (5 leaves / 2500 lb.) #353

Stock# 7115039
The CARRY-ON factory OEM 25-1/4" 5 leaf double eye leaf spring is direct replacement spring for Carry-On utility Trailers.  Measures 1-3/4" wide and has a 2500 lb. capacity per spring. Each spring includes a  9/16" I.D. nylon bushings.

$52.00

CARRY-ON 27" Double Eye Leaf Spring (3 leaves / 1000 lb.) #630

CARRY-ON 27" Double Eye Leaf Spring (3 leaves / 1000 lb.) #630

Stock# 7115096
The CARRY-ON factory OEM 27" 3 leaf double eye leaf spring is direct replacement spring for Carry-On utility Trailers.  Measures 1-3/4" wide and has a 1000 lb. capacity per spring. Each spring includes a  9/16" I.D. nylon bushings.

$27.50

CARRY-ON 27" Double Eye Leaf Spring (4 leaves / 2100 lb.) #631

CARRY-ON 27" Double Eye Leaf Spring (4 leaves / 2100 lb.) #631

Stock# 7115097
The CARRY-ON factory OEM 27" 4 leaf double eye leaf spring is direct replacement spring for Carry-On utility Trailers.  Measures 1-3/4" wide and has a 2100 lb. capacity per spring. Each spring includes a  9/16" I.D. nylon bushings.

$38.95

CARRY-ON 26-1/2" Hook End Slipper Leaf Spring (4 leaves / 1500 lb.) #352

CARRY-ON 26-1/2" Hook End Slipper Leaf Spring (4 leaves / 1500 lb.) #352

Stock# 7115038
The CARRY-ON factory OEM 26-1/2" 4 leaf hook end slipper leaf spring is a direct replacement spring for Carry-On utility Trailers.  Measures 1-3/4" wide and has a 1500 lb. capacity per spring. Each spring includes a  9/16" I.D. nylon bushing.

$46.50

CARRY-ON 24-1/4" Slipper Leaf Spring (2 leaves / 1000 lb.) #351

CARRY-ON 24-1/4" Slipper Leaf Spring (2 leaves / 1000 lb.) #351

Stock# 7115037
The CARRY-ON factory OEM 24-1/4" 2 leaf radius end slipper leaf spring is a direct replacement spring for Carry-On utility Trailers.  Measures 1-3/4" wide and has a 1000 lb. capacity per spring. Each spring includes a  9/16" I.D. nylon bushing.

$25.99

CARRY-ON 1-3/4" Round Axle, Steel Leaf Spring Seats (Pair) #645

CARRY-ON 1-3/4" Round Axle, Steel Leaf Spring Seats (Pair) #645

Stock# 7115148
Carry-On trailer axle spring seats can be welded on the top or bottom of round tube axles to provide a flat mounting plate surface with centering hole for leaf springs. Fits most 2000 lb. round tube axles. Sold in pairs.

$7.59

CARRY-ON 2-3/8" Round Axle, Steel Leaf Spring Seats (Pair) #646

CARRY-ON 2-3/8" Round Axle, Steel Leaf Spring Seats (Pair) #646

Stock# 7115149
Carry-On trailer axle spring seats can be welded on the top or bottom of round tube axles to provide a flat mounting plate surface with centering hole for leaf springs. Fits most 3500 lb. round tube axles. Sold in pairs.

$8.99

CARRY-ON 3" Round Axle, Steel Leaf Spring Seats (Pair) #647

CARRY-ON 3" Round Axle, Steel Leaf Spring Seats (Pair) #647

Stock# 7115150
Carry-On trailer axle spring seats can be welded on the top or bottom of round tube axles to provide a flat mounting plate surface with centering hole for leaf springs. Fits most 5000 lb. round tube axles. Sold in pairs.

$8.99

CARRY-ON  Rear Slipper Spring Hanger #144

CARRY-ON Rear Slipper Spring Hanger #144

Stock# 7115014
The Carry-On rear leaf spring hanger is designed for 1-3/4" wide slipper springs. This is a weld on hanger and is sold in pairs.

$6.50

CARRY-ON Bolt-On Slipper Leaf Spring Hanger #141

CARRY-ON Bolt-On Slipper Leaf Spring Hanger #141

Stock# 7115011
The Carry-On slipper spring hanger is designed for Carry-On trailers using 1-3/4" wide slipper springs. This is a bolt-on hanger.

$8.50

CARRY-ON Bolt-On Front Leaf Spring Hanger #142

CARRY-ON Bolt-On Front Leaf Spring Hanger #142

Stock# 7115012
The Carry-On front spring hanger is designed for Carry-On trailers using 1-3/4" wide eye to eye leaf springs. This is a bolt-on hanger..

$7.99

CARRY-ON Medium Trailer Leaf Spring Hanger #506

CARRY-ON Medium Trailer Leaf Spring Hanger #506

Stock# 7115070
Carry-On medium spring hanger is used to suspend a 1-3/4" wide leaf spring below a frame rail. Item is raw steel and needs to be welded to the trailer. Sold as each.

$7.50

CARRY-ON Large Trailer Leaf Spring Hanger #507

CARRY-ON Large Trailer Leaf Spring Hanger #507

Stock# 7115071
Carry-On Large spring hanger is used to suspend a 1-3/4" wide leaf spring below a frame rail on trailers with tandem suspensions. Sold as each.

$8.50

CARRY-ON Eye to Slipper Leaf Spring Hanger Kit #607

CARRY-ON Eye to Slipper Leaf Spring Hanger Kit #607

Stock# 7115085
The Carry-On single axle eye to slipper sipper spring hanger kit, for 1-3/4" wide springs, includes:(2) eye bolt leaf hangers, (2) slipper leaf hangers and 2 hanger bolts (9/16") with nuts.

$18.95

CARRY-ON Trailer Leaf Spring Hanger Kit #644

CARRY-ON Trailer Leaf Spring Hanger Kit #644

Stock# 7115107
Carry-On Trailer leaf spring hanger kit, for 1-3/4" wide springs, includes: Weld-On Front & Rear Hangers (2 each), Shackle Links (4), Shackle Bolt w/Nut (6).

$21.50

CARRY-ON 9/16" x 3" Shackle Bolt Kit, (2 pack) #505

CARRY-ON 9/16" x 3" Shackle Bolt Kit, (2 pack) #505

Stock# 7115069
Carry-On 9/16"-18 x 3" steel shackle bolts are fluted to help prevent the bolt from rotating when mounted. Used to mount double eye leaf springs. (2-Pack)

$5.55

CARRY-ON 9/16" x 3" Shackle Bolt Kit, (4-pack) #123

CARRY-ON 9/16" x 3" Shackle Bolt Kit, (4-pack) #123

Stock# 7115004
Carry-On 9/16"-18 x 3" steel shackle bolts are fluted to help prevent the bolt from rotating when mounted. Used on Carry-On trailers to mount double eye leaf springs in front and rear hangers. (4-Pack)

$8.99

CARRY-ON Nylon Leaf Spring Bushing 9-1/6" I.D. x 11/16" O.D. 4-Pack #521

CARRY-ON Nylon Leaf Spring Bushing 9-1/6" I.D. x 11/16" O.D. 4-Pack #521

Stock# 7115081
Carry-On Trailer spring equalizer bushings are used in multi-axle suspensions which accommodate Double Eye leaf springs and equalizer bars.

$5.99

CARRY-ON 7-3/4" Tri-Angle Leaf Spring Equalizer Bar #510

CARRY-ON 7-3/4" Tri-Angle Leaf Spring Equalizer Bar #510

Stock# 7115074
Carry-On Trailer spring equalizer bars are used in multi-axle suspensions which accommodate Double Eye,  C-Hook or Slipper style leaf springs.

$14.50

CARRY-ON 2-9/16" Spring Shackle Links, (2 pack) #508

CARRY-ON 2-9/16" Spring Shackle Links, (2 pack) #508

Stock# 7115072
Carry-On Spring Shackle Links connect double eye leaf springs to the rear hangers or equalizers. Length = 3-3/4", Hole Center = 2-9/16", fits 9/16" shackle bolts. (2-Pack)

$4.99

CARRY-ON 3-1/8" Spring Shackle Links, (2 pack) #651

CARRY-ON 3-1/8" Spring Shackle Links, (2 pack) #651

Stock# 7115110
Carry-On SpringShackle Links connect double eye leaf springs to the rear hangers or equalizers. Length = 4-3/8", Hole Center = 3-1/8", fits 9/16" shackle bolts. (2-Pack)

$5.99

CARRY-ON 2-1/4" Shackle Links, (4-pack) #124

CARRY-ON 2-1/4" Shackle Links, (4-pack) #124

Stock# 7115005
Carry-On Shackle Links connect double eye leaf springs to the rear hangers or equalizers. Length = 3-1/2", Hole Center = 2-1/4", fits 9/16" shackle bolts.

$7.99

CARRY-ON 3-1/8" Shackle Links, (4-pack) #125

CARRY-ON 3-1/8" Shackle Links, (4-pack) #125

Stock# 7115006
Carry-On Shackle Links connect double eye leaf springs to the rear hangers or equalizers. Length = 4-3/8", Hole Center = 3-1/8", Thickness = .23" fits 9/16" shackle bolts.

$8.99

CARRY-ON 3/8" Round U-Bolt Kit #652

CARRY-ON 3/8" Round U-Bolt Kit #652

Stock# 7115111
Carry-On steel trailer u-bolts fit most axles with a 1-7/8" diameter round axle tube. Kit includes QTY: 2 round shoulder 1-7/8" U-bolts with 3/8"-16 threads, QTY: 4 Flat Washers 3/8", and QTY: 4 Nylock Nuts 3/8".

$5.50

CARRY-ON 1/2" Round U-Bolt Kit #514

CARRY-ON 1/2" Round U-Bolt Kit #514

Stock# 7115077
Carry-On steel trailer u-bolts fit most 3500 lbs. rated axles with a 2-3/8" diameter round axle tube. Kit includes QTY:2 round shoulder 4-1/2" long 2-3/8" wide U-bolts with 1/2"-13 threads, QTY: 4 Flat Washers 1/2", and QTY: 4 Nylock Nuts 1/2".

$5.99

CARRY-ON 9/16" Round U-Bolt Kit #653

CARRY-ON 9/16" Round U-Bolt Kit #653

Stock# 7115112
Carry-On steel trailer u-bolts fit most axles with a 3" diameter round axle tube. Kit includes QTY: 2 round shoulder 3" U-bolts with 9/16"-18 threads and QTY: 4 Nylock Nuts 9/16".

$6.99

CARRY-ON 3/8" Square U-Bolt Kit #516

CARRY-ON 3/8" Square U-Bolt Kit #516

Stock# 7115079
Carry-On Zinc plated steel trailer u-bolts fit most axles with 2" x 2" diameter square axle tube. Kit includes QTY: 2 square shoulder 2" U-bolts with 3/8"-16 threads, QTY: 4 Flat Washers 3/8", and QTY: 4 Nylock Nuts 3/8".

$6.50

CARRY-ON 1/2" Square U-Bolt Kit #515

CARRY-ON 1/2" Square U-Bolt Kit #515

Stock# 7115078
Carry-On Zinc plated steel trailer u-bolts fit most axles with 3" x 3" diameter square axle tube. Kit includes QTY: 2 square shoulder 3" U-bolts with 1/2"-13 threads, QTY: 4 Flat Washers 1/2", and QTY: 4 Nylock Nuts 1/2".

$6.50

CARRY-ON Tie Plates for 1-7/8" Axle Tube, (2 pack) #648

CARRY-ON Tie Plates for 1-7/8" Axle Tube, (2 pack) #648

Stock# 7115108
Carry-On steel trailer axle tie plates fit most 2000 lbs. rated axles with a 1-7/8" diameter axle tube. Sold as a pair.

$9.95

CARRY-ON Tie Plates for 2-3/8" Axle Tube, (2 pack) #513

CARRY-ON Tie Plates for 2-3/8" Axle Tube, (2 pack) #513

Stock# 7115076
Carry-On steel trailer axle tie plates fit most 3500 lbs. rated axles with a 2-3/8" diameter axle tube. Sold as a pair.

$9.50

CARRY-ON Tie Plates for 3" Axle Tube, (2 pack) #650

CARRY-ON Tie Plates for 3" Axle Tube, (2 pack) #650

Stock# 7115109
Carry-On steel trailer axle tie plates fit most 5200 lbs. rated axles with a 3" diameter axle tube. Sold as a pair.

$11.95

CARRY-ON Steel Single Axle Fender, 12/13"  #609

CARRY-ON Steel Single Axle Fender, 12/13" #609

Stock# 7115086
This CARRY-ON steel single axle fender with back measures 19-1/4" long, 5-1/2" wide, 6-1/4" high and can fit wheels 12" to 13".

$22.50

CARRY-ON White Plastic Single Axle Fender, 12/13"  #611

CARRY-ON White Plastic Single Axle Fender, 12/13" #611

Stock# 7115088
This CARRY-ON white plastic single axle fender measures 22-1/2" long, 7-1/4" wide, 7" high and was designed for wheels 12" to 13".

$21.95

CARRY-ON Galvanized Steel Single Axle Fender, 12/13"  #615

CARRY-ON Galvanized Steel Single Axle Fender, 12/13" #615

Stock# 7115091
This CARRY-ON galvanized steel single axle fender measures 23-1/2" long, 7-1/2" wide, 6" high and was designed for wheels 12" to 13".

$31.95

CARRY-ON Galvanized Steel Single Axle Fender, 12/13"  #616

CARRY-ON Galvanized Steel Single Axle Fender, 12/13" #616

Stock# 7115092
This CARRY-ON galvanized steel single axle fender measures 27-1/2" long, 8-1/2" wide, 10" high and was designed for wheels 12" to 13".

$36.95

CARRY-ON Steel Single Axle Fender with Back, 13" #357

CARRY-ON Steel Single Axle Fender with Back, 13" #357

Stock# 7115040
This CARRY-ON steel single axle fender with back measures 30" long, 10" wide, 9" high and can fit wheels up to 13".

$44.00

CARRY-ON Galvanized Steel Single Axle Fender, 14/15"  #614

CARRY-ON Galvanized Steel Single Axle Fender, 14/15" #614

Stock# 7115090
This CARRY-ON galvanized steel single axle fender measures 31-1/2" long, 9-1/4" wide, 15-1/2" high and was designed for wheels 14"  to 15".

$41.95

CARRY-ON White Plastic Single Axle Fender, 14/15" #618

CARRY-ON White Plastic Single Axle Fender, 14/15" #618

Stock# 7115093
This CARRY-ON white plastic single axle fender measures 42-3/4" long, 9-1/4" wide, 13-1/2" high and was designed for wheels 14" to 15".

$69.95

CARRY-ON Aluminum TP Jeep Style Single Axle Fender, 14/15"  #610

CARRY-ON Aluminum TP Jeep Style Single Axle Fender, 14/15" #610

Stock# 7115087
This CARRY-ON aluminum tread plate jeep style single axle fender measures 32" long, 10" wide, 13" high and was designed for wheels 14" to 15".

$79.95

CARRY-ON Steel Single Axle Flat Top Fender  #7240

CARRY-ON Steel Single Axle Flat Top Fender #7240

Stock# 7115124
This CARRY-ON steel single axle flat top fender is usually found on CARRY-ON trailers with GVWR of 2000 lbs. and mesh floors. Fender measures 23-3/4" long, 7-1/4" wide, 9" high and was designed for wheels up to 12".

$21.50

CARRY-ON Smooth Aluminum Single Axle Fender, 15"  #9291

CARRY-ON Smooth Aluminum Single Axle Fender, 15" #9291

Stock# 7115142
This CARRY-ON smooth aluminum single axle fender measures 32" long, 9" wide, 15" high and can fit wheels up to 15".

$55.00

CARRY-ON Steel Single Axle Fender with Back, 15"  #9320

CARRY-ON Steel Single Axle Fender with Back, 15" #9320

Stock# 7115143
This CARRY-ON steel single axle fender with back measures 32" long, 9" wide, 15" high and can fit wheels up to 15".

$37.50

CARRY-ON Steel Single Axle Fender, 15"  #9321

CARRY-ON Steel Single Axle Fender, 15" #9321

Stock# 7115144
This CARRY-ON steel single axle fender measures 32" long, 9" wide, 15" high and was designed for wheels up to 15".

$32.50

CARRY-ON Steel Tandem Axle Teardrop Fender with Back, 15"  #9660

CARRY-ON Steel Tandem Axle Teardrop Fender with Back, 15" #9660

Stock# 7115145
This CARRY-ON steel tandem axle teardrop fender measures 66" long, 9-1/4" wide, 18-1/2" high and can fit wheels up to 15".

$85.50

CARRY-ON Steel Tandem Axle Fender, 15"  #9661

CARRY-ON Steel Tandem Axle Fender, 15" #9661

Stock# 7115146
This CARRY-ON steel tandem axle fender measures 66" long, 9-1/4" wide, 18-1/2" high and can fit wheels up to 15".

$55.00

CARRY-ON Aluminum TP Jeep Style Tandem Axle Fender, 15"  #613

CARRY-ON Aluminum TP Jeep Style Tandem Axle Fender, 15" #613

Stock# 7115089
This CARRY-ON aluminum tread plate jeep style tandem axle fender measures 68" long, 10" wide, 17" high and was designed for wheels up to 15".

$120.00

CARRY-ON  1-7/8" Straight Trailer Coupler for 2" Channel #198

CARRY-ON 1-7/8" Straight Trailer Coupler for 2" Channel #198

Stock# 7115026
The Carry-On straight coupler accepts an 1-7/8" ball and fits on 2" wide tongues. Zinc-plated corrosion resistant finish, coupler may be bolted or welded to trailer tongue. Mounting Holes are 2-1/4" from center bolt to center bolt.

$19.95

CARRY-ON  2" Straight Trailer Coupler for 2" Channel #199

CARRY-ON 2" Straight Trailer Coupler for 2" Channel #199

Stock# 7115027
The Carry-On straight coupler accepts a 2" ball and fits on 2" wide tongues. Zinc-plated corrosion resistant finish, coupler may be bolted or welded to trailer tongue. Mounting Holes are 3" from center bolt to center bolt.

$19.95

CARRY-ON 2" Ball A-Frame Trailer Coupler, 5k Capacity #200

CARRY-ON 2" Ball A-Frame Trailer Coupler, 5k Capacity #200

Stock# 7115028
Carry-On Class-III, 5000 lb. (GTW) capacity,  A-Frame trailer coupler. Heavy-duty safety latch is designed to prevent accidental uncoupling. Couplers come fully assembled and pre-drilled for bolt-on A-Frame trailer jacks.

$27.99

CARRY-ON 2-5/16" Ball A-Frame Trailer Coupler, 13k Capacity #256

CARRY-ON 2-5/16" Ball A-Frame Trailer Coupler, 13k Capacity #256

Stock# 7115029
Carry-On 13,000 lb. (GTW) capacity,  A-Frame trailer coupler for 2-5/16" balls only. Heavy-duty safety latch is designed to prevent accidental uncoupling. Couplers come fully assembled and pre-drilled for bolt-on A-Frame trailer jacks.

$31.50

CARRY-ON Tilt Deck Tripper Latch #138

CARRY-ON Tilt Deck Tripper Latch #138

Stock# 7115008
The Carry-On tripper latch fits most Carry-On tilt deck trailers.

$13.50

CARRY-ON 1-7/8" Coupler Repair Kit #140

CARRY-ON 1-7/8" Coupler Repair Kit #140

Stock# 7115010
Carry-On coupler repair kit for 1-7/8" balls. This kit allows you to repair the locking mechanism on Carry-on trailers with 1-7/8" balls.

$12.50

CARRY-ON 2" Coupler Repair Kit #143

CARRY-ON 2" Coupler Repair Kit #143

Stock# 7115013
Carry-On coupler repair kit for 2" balls. This kit allows you to repair the locking mechanism on Carry-on trailers with 2" balls.

$15.99

CARRY-ON 2000 lb. Capacity A-Frame Trailer Jack #741

CARRY-ON 2000 lb. Capacity A-Frame Trailer Jack #741

Stock# 7115152
The CARRY-ON Model #741 has a black powder coat finish and and a lift capacity of 2000 lbs. This jack has 14" of travel with an overall retracted length of 20". Top wind handle design provides easier cranking by utilizing your arm's most efficient muscles. A-Frame weld-on or Bolt-on bracket design.

$25.50

CARRY-ON 24" Class I Trailer Safety Chain, Pair #638

CARRY-ON 24" Class I Trailer Safety Chain, Pair #638

Stock# 7115102
Carry-On Steel Trailer Safety Chain secures the trailer to the tow vehicle in the event the trailer coupler comes off of the ball. Safety chain is equipped with latching hook and is 24" x 3/16" with a 2000lbs. capacity. Sold as a pair.

$9.99

CARRY-ON 30" Class II Trailer Safety Chain, Single #639

CARRY-ON 30" Class II Trailer Safety Chain, Single #639

Stock# 7115103
Carry-On Steel Trailer Safety Chain secures the trailer to the tow vehicle in the event the trailer coupler comes off of the ball. Safety chain is equipped with latching hook and is 30" x 1/4" with a 3500lbs. capacity. Sold as single.

$12.50

CARRY-ON 30" Class III Trailer Safety Chain, Single #640

CARRY-ON 30" Class III Trailer Safety Chain, Single #640

Stock# 7115104
Carry-On Steel Trailer Safety Chain secures the trailer to the tow vehicle in the event the trailer coupler comes off of the ball. Safety chain is equipped with latching hook and is 30" x 5/16" with a 5000lbs. capacity. Sold as each.

$13.99

CARRY-ON Class-III Trailer Safety Chain w/Clevis Hook, Single #137

CARRY-ON Class-III Trailer Safety Chain w/Clevis Hook, Single #137

Stock# 7115007
Carry-On Trailer Safety Chain with clevis hook. The safety chain is sold as a single unit rated up to 5,000 lbs (GVWR) rating.
Zinc-plated trailer safety chains with S-Hooks connect the trailer tongue to towing vehicle for security and safety.

$29.99

CARRY-ON 3/8" S-Hook with Clip, (2 pack) #642

CARRY-ON 3/8" S-Hook with Clip, (2 pack) #642

Stock# 7115106
Carry-On 3/8" Steel S-Hooks with clip are typically used with trailer safety chain applications. Sold as a pair.

$6.79

CARRY-ON 7/16" S-Hook with Clip, (2 pack) #641

CARRY-ON 7/16" S-Hook with Clip, (2 pack) #641

Stock# 7115105
Carry-On 7/16" Steel S-Hooks with clip are typically used with trailer safety chain applications. Sold as a pair.

$6.99

CARRY-ON Weld-On 3/8" Safety Chain Retainers (Pair) #736

CARRY-ON Weld-On 3/8" Safety Chain Retainers (Pair) #736

Stock# 7115154
Carry-On 3/8" x 5" weld-on safety chain retainers are designed to help attach safety chains securely to the trailer frame. (Pair)

$6.99

CARRY-ON Class I & II Safety Chain Weld Links #148

CARRY-ON Class I & II Safety Chain Weld Links #148

Stock# 7115018
The Carry-On Weld Link provides a strong connection point for class-I and II safety chain applications. Sold in pairs.

$5.29

CARRY-ON Class III & IV Safety Chain Weld Links #149

CARRY-ON Class III & IV Safety Chain Weld Links #149

Stock# 7115019
The Carry-On Weld Link provides a strong connection point for class-III and IV safety chain applications. Sold in pairs.

$5.50

CARRY-ON Trailer Breakaway Kit with Charger & Switch #701

CARRY-ON Trailer Breakaway Kit with Charger & Switch #701

Stock# 7115116
For use on single, tandem and tri-axle trailers with 12 volt electric brakes. Breakaway kit includes a breakaway battery, battery box, switch, cable, pin, charger, and mounting hardware.

$43.50

CARRY-ON Trailer Breakaway Kit with Switch #700

CARRY-ON Trailer Breakaway Kit with Switch #700

Stock# 7115115
For use on single, tandem and tri-axle trailers with 12 volt electric brakes. Breakaway kit includes a breakaway battery, battery box, switch, cable, pin, and mounting hardware.

$39.95

CARRY-ON Trailer Breakaway Kit, 12v Battery Only #711

CARRY-ON Trailer Breakaway Kit, 12v Battery Only #711

Stock# 7115123
This Breakaway battery is intended to be used to with CARRY-ON Trailer Breakaway systems. Sold as battery only.

$21.00

CARRY-ON Trailer Breakaway Kit, Cable and Switch Only #710

CARRY-ON Trailer Breakaway Kit, Cable and Switch Only #710

Stock# 7115122
This Breakaway cable and switch is intended to be used to with CARRY-ON Trailer Breakaway systems. Cable and switch only.

$9.95

CARRY-ON Trailer Breakaway Kit, Switch with Cable and Pin Only #139

CARRY-ON Trailer Breakaway Kit, Switch with Cable and Pin Only #139

Stock# 7115009
Carry-On Breakaway Switch with Cable and Pin has a pig tail wiring harness that would be hardwired directly into a Carry-On wiring harness set up for a brake away kit.

$10.95

CARRY-ON Trailer Breakaway Kit, Battery Box Mounting Hardware #705

CARRY-ON Trailer Breakaway Kit, Battery Box Mounting Hardware #705

Stock# 7115117
This Breakaway hardware kit comes with everything needed to mount a CARRY-ON breakaway battery box (# 706) to a trailer. Includes QTY: 2 U-bolts, QTY: 4 Flat washers, Qty: 4 Nylock nuts, and QTY: 4 hex-head self tapping screws.

$4.50

CARRY-ON Trailer Breakaway Kit, Battery Box Only #706

CARRY-ON Trailer Breakaway Kit, Battery Box Only #706

Stock# 7115118
This Breakaway battery box is intended to be used with a CARRY-ON breakaway battery (# 711). Hardware sold separately.

$8.99

CARRY-ON Trailer Breakaway Kit, Cable and Pin Only #707

CARRY-ON Trailer Breakaway Kit, Cable and Pin Only #707

Stock# 7115119
This Breakaway Cable is intended to be used with CARRY-ON Breakaway Switch (# 708). Cable and Pin only.

$4.99

CARRY-ON Trailer Breakaway Kit, Switch Only #708

CARRY-ON Trailer Breakaway Kit, Switch Only #708

Stock# 7115120
This Breakaway Cable is intended to be used with CARRY-ON Breakaway Switch (# 708). Switch only.

$8.50

CARRY-ON Trailer Breakaway Kit, Battery Charger Only #709

CARRY-ON Trailer Breakaway Kit, Battery Charger Only #709

Stock# 7115121
This Breakaway battery charger is intended to be used to charge a CARRY-ON Breakaway battery (# 711). Charger only.

$8.99

CARRY-ON Wire Frame Clips, (10-Pack) #146

CARRY-ON Wire Frame Clips, (10-Pack) #146

Stock# 7115016
Theses metal clips are designed to secure electrical wire to the frame of the trailer to prevent drooping and damage. (10-Pack)

$7.79

CARRY-ON Red/Amber Clearance Marker Fender Light #836

CARRY-ON Red/Amber Clearance Marker Fender Light #836

Stock# 7115167
The Carry-On surface mount fender light has an amber/red lens and measures 8" in total height. It has a 42" long 2 wire pigtail. The white wire needs to be grounded to the trailer and the brown wire should be connected to your running lights. Carries a one year warranty and exceeds DOT specifications.

$10.99

CARRY-ON Red/Amber Clearance Marker Fender Light #836-2

CARRY-ON Red/Amber Clearance Marker Fender Light #836-2

Stock# 7115168
The Carry-On surface mount fender light has an amber/red lens and measures 6" in total height. It has a 12" long 2 wire pigtail. The white wire needs to be grounded to the trailer and the brown wire should be connected to your running lights. Carries a one year warranty and exceeds DOT specifications.

$10.99

CARRY-ON Amber Surface Mount Clearance/Side Marker Light #817-2

CARRY-ON Amber Surface Mount Clearance/Side Marker Light #817-2

Stock# 7115147
Carry-On surface mount amber side marker light with reflector lens.
Dimensions:  W = 3-3/4"   H = 2"   D = 1"

$5.49

CARRY-ON Trailer Tail Light Protector, Painted Steel #812

CARRY-ON Trailer Tail Light Protector, Painted Steel #812

Stock# 7115130
Carry-On Trailer Tail Light Protector provides added protection for fragile trailer tail lights. Mounting holes fit standard DOT brake/tail lamps. No hardware required for installation.

$15.99

CARRY-ON Spare Tire Carrier, Tube / Channel Mount #628

CARRY-ON Spare Tire Carrier, Tube / Channel Mount #628

Stock# 7115094
This CARRY-ON spare tire carrier is designed to mount to a trailer tongue, frame rail, or upright. It can accommodate wheels 8" through 15" on 4" or 4.5" bolt patterns.

$29.99

CARRY-ON Interior Spare Tire Mount #855

CARRY-ON Interior Spare Tire Mount #855

Stock# 7115134
The Carry-On spare tire carrier secures to the wall of the enclosed trailer and will safely transport a spare tire up to 15". This item is intended to be used in Carry-On enclosed utility trailers with 3/8" thick walls.

$34.50

CARRY-ON Weld-On Stake Pocket, 3-1/2" x 1-1/2" ID #145

CARRY-ON Weld-On Stake Pocket, 3-1/2" x 1-1/2" ID #145

Stock# 7115015
Weld to trailer frame for mounting wood or steel stake posts.
Inside dimension 3-1/2" x 1-1/2", Height of 2", and 5/32" thick steel material.

$6.50

CARRY-ON Bolt-On Stake Pocket #807

CARRY-ON Bolt-On Stake Pocket #807

Stock# 7115173
Bolt-on stake pockets are used to add stake post (not included) to a trailer to build removable fencing/walls around an open trailer. Pocket opening is 3" x 1.5".

$6.29

CARRY-ON Corner Stake Rack Connector #806

CARRY-ON Corner Stake Rack Connector #806

Stock# 7115174
Corner connectors mount to wood stake assemblies for quick installation & removal of tail or side racks. Raw steel connector set includes one corner assembly (2 pieces total).

$12.50

CARRY-ON Utility Trailer Trimmer Rack  #801

CARRY-ON Utility Trailer Trimmer Rack #801

Stock# 7115155
Designed for open utility trailers, rack holds up to 3 landscape trimmers. (Trimmers Not Included)
Easily bolts to angle or 2-3/8" top rails. Includes retainer pins with R-clips to prevent equipment from rolling.

$98.00

CARRY-ON Enclosed Utility Trailer Ladder Rack  #846

CARRY-ON Enclosed Utility Trailer Ladder Rack #846

Stock# 7115156
Designed for enclosed cargo trailers with a 5, 6, 7 or 8 foot width. Aluminum construction that will hold up to the elements and last for years. Will not fit 8.5' wide trailers.

$128.00

CARRY-ON 1/4" x 3" Floor Screws, (10 pack) #658

CARRY-ON 1/4" x 3" Floor Screws, (10 pack) #658

Stock# 7115113
Carry-On 1/4" x 3" floor screws require a square bit and are used on utility trailers with wood floors. Length = 3", Shaft diameter = 1/4". Sold as a 10 pack.

$10.99

CARRY-ON Trailer Gate Spring Latch, Complete Kit #847

CARRY-ON Trailer Gate Spring Latch, Complete Kit #847

Stock# 7115132
Carry-On Spring Latch Complete Kits are used on the rear tail gates or ramps of Carry-On utility trailers. Comes with 4 self-tapping screws for easy installation.

$17.99

CARRY-ON Trailer Gate Spring Latch, Repair Kit #819

CARRY-ON Trailer Gate Spring Latch, Repair Kit #819

Stock# 7115131
Carry-On Spring Latch Repair Kit is used to replace the handle, spring, and roll pin on Carry-On spring latches found on the rear gate. 

$11.99

CARRY-ON Black Mesh Landscape Box, 18" x 18" x 65" #800

CARRY-ON Black Mesh Landscape Box, 18" x 18" x 65" #800

Stock # T7115157
The Carry-On black mesh landscape box fits most 5' wide utility trailers and can be welded or bolted to your trailer. Manufactured for Carry-On utility trailers but can be used in many other applications. This box is constructed with angled steel and has mesh sides, top and floor. Measures 18" High x 18" Deep x 65" Wide
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck Truck Freight Shipping Information for details)

$128.00

CARRY-ON Black Mesh Landscape Box, 18" x 18" x 80" #799

CARRY-ON Black Mesh Landscape Box, 18" x 18" x 80" #799

Stock # T7115127
The Carry-On black mesh landscape box fits most 6' wide utility trailers and can be welded or bolted to your trailer. Manufactured for Carry-On utility trailers but can be used in many other applications. This box is constructed with angled steel and has mesh sides, top and floor. Measures 18" High x 18" Deep x 80" Wide
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck Truck Freight Shipping Information for details)

$178.50

CARRY-ON Black Mesh Landscape Box, 18" x 18" x 80" #870

CARRY-ON Black Mesh Landscape Box, 18" x 18" x 80" #870

Stock # T7115158
The Carry-On black mesh landscape box fits most 7' wide utility trailers and can be welded or bolted to your trailer. Manufactured for Carry-On utility trailers but can be used in many other applications. This box is constructed with angled steel and has mesh sides, top and floor. Measures 18" High x 18" Deep x 80" Wide
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck Truck Freight Shipping Information for details)

$159.95

CARRY-ON Black Mesh Landscape Box w/Mesh Lid, 18" x 18" x 65" #861

CARRY-ON Black Mesh Landscape Box w/Mesh Lid, 18" x 18" x 65" #861

Stock # T7115135
The Carry-On black mesh landscape box has a lockable mesh lid, fits most 5' wide utility trailers and can be welded or bolted to your trailer. Manufactured for Carry-On utility trailers but can be used in many other applications. This box is constructed with angled steel and has mesh sides, lid and floor. Measures 18" High x 18" Deep x 65" Long
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck Truck Freight Shipping Information for details)

$198.00

CARRY-ON Black Mesh Landscape Box w/Mesh Lid, 18" x 18" x 80" #862

CARRY-ON Black Mesh Landscape Box w/Mesh Lid, 18" x 18" x 80" #862

Stock # T7115136
The Carry-On black mesh landscape box has a lockable mesh lid, fits most 6' wide utility trailers and can be welded or bolted to your trailer. Manufactured for Carry-On utility trailers but can be used in many other applications. This box is constructed with angled steel and has mesh sides, lid and floor. Measures 18" High x 18" Deep x 80" Long
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck Truck Freight Shipping Information for details)

$219.00

CARRY-ON A-Frame Tongue Box, (Mesh) #798

CARRY-ON A-Frame Tongue Box, (Mesh) #798

Stock # 7115126
Carry-On Steel Mesh Trailer Tongue Tool Box is designed to mount to the front of A-frame style Carry-On trailer. This toolbox is lockable and comes with a pad locklatch.
Measures 38-1/2" Wide x 21-1/2" Deep x 12-1/2" High

$119.00

CARRY-ON A-Frame Tongue Box, (Black) #797

CARRY-ON A-Frame Tongue Box, (Black) #797

Stock # 7115125
Carry-On Steel Trailer Tongue Tool Box is designed to mount to the front of A-frame style Carry-On trailer. This toolbox is lockable and comes with two keys. It also has pre-installed tension chain to prevent over-opening. Measures 37-1/2" Wide x 21-1/2" Deep x 12-1/2" High.

$212.00

CARRY-ON 3-Point Hauler Basket, 76" x 14" x 53" #803

CARRY-ON 3-Point Hauler Basket, 76" x 14" x 53" #803

Stock # 7115129
Carry-On black powder coated steel mesh all-purpose 3-point hauler basket can attach to tractors, front-end loaders, and other equipment. The gate is secured with two 1/2" drop pins. Measures 14.5" High x 53.75" Deep x 76.5" Wide
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck Truck Freight Shipping Information for details)

$479.00

CARRY-ON Dump Tarp, 6 Ft. Width (Mesh) #857

CARRY-ON Dump Tarp, 6 Ft. Width (Mesh) #857

Stock# 7115160
The Carry-On Heavy-duty 6' mesh tarp for the dump tarp roller kit fits trailers up to 12' in length. Tarps are quality constructed to meet the rigors of over-the-road hauling for industrial, farm and home use.

$124.00

CARRY-ON Dump Tarp, 7 Ft. Width (Mesh) #859

CARRY-ON Dump Tarp, 7 Ft. Width (Mesh) #859

Stock# 7115161
The Carry-On Heavy-duty 7' mesh tarp for the dump tarp roller kit fits trailers up to 14' in length. Tarps are quality constructed to meet the rigors of over-the-road hauling for industrial, farm and home use.

$159.00

CARRY-ON Universal Dump Tarp Roller Assembly (6' & 7' Widths) #860

CARRY-ON Universal Dump Tarp Roller Assembly (6' & 7' Widths) #860

Stock# 7115159
The Carry-On Universal Dump Tarp Roller Assembly (Tarp sold separately) allows you to easily secure your trailer load in seconds. Roller assembly can be bolted or welded. Fits 6' and 7' wide trailers.

$255.00