Catalog Advanced Search

Stock# 5415038
Fits 2.240", 2.328", 2.441", 2.562", and 2.717" diameter 'Trailer Buddy' brand grease caps, (1) pair.

Stock# 5415035
TRAILER BUDDY Threaded Stainless Steel wheel bearing protectors replace original equipment dust caps and allow you to easily add bearing grease to the wheel hub to maintain proper lubrication of bearings.

Stock# 5415024
TRAILER BUDDY stainless steel "Oil Bath" wheel bearing protectors are designed to be used with UFP's Gold System hubs and rotors. Sold as each. Size: 1.980 for 3500 lb. hubs and rotors.

Stock# 5415015
TRAILER BUDDY Stainless Steel wheel bearing protectors with stainless steel caps (07509) replace original equipment dust caps and allow you to easily add bearing grease to the wheel hub to maintain proper lubrication of bearings.

Stock# 5415036
TRAILER BUDDY Stainless Steel wheel bearing protectors replace original equipment dust caps and allow you to easily add bearing grease to the wheel hub to maintain proper lubrication of bearings.

Stock# 5415022
TRAILER BUDDY stainless steel "Oil Bath" wheel bearing protectors are designed to be used with UFP's Gold System hubs and rotors. Sold as each. Size: 2.328 for 5200 lb. hubs and rotors.

Stock# 5415037
TRAILER BUDDY Stainless Steel wheel bearing protectors replace original equipment dust caps and allow you to easily add bearing grease to the wheel hub to maintain proper lubrication of bearings.

Stock# 5415039
TRAILER BUDDY Stainless Steel wheel bearing protectors replace original equipment dust caps and allow you to easily add bearing grease to the wheel hub to maintain proper lubrication of bearings.

Stock# 5415062
This proprietary blend of Hybrid Lubricant is specially formulated by UFP to be used with "Vault" system. The lubricant is thermally activated, thinning out and replenishing the bearings, reducing friction and dissipating heat.

Stock# 5415032
Unpainted UFP hub with studs and races only, fits 1-3/8" straight spindle. 5 on 4-1/2" bolt circle.

Stock# 5415047
Unpainted UFP Oil bath hub with studs and races only, fits 1-3/8" straight spindle. 5 on 4-1/2" bolt circle.

Stock# 5415001
 Metal body construction with Double-Lip rubber seal. For use with 1 3/8" (L68149) trailer wheel bearings
Seal I.D. = 1.68"    Seal O.D. = 2.33"

Stock# 5415064
Metal body construction with Double-Lip rubber seal. For use with the Vault Lubrication System.
Seal I.D. = 1.68"    Seal O.D. = 2.56"

Stock# 5415063
Vault Hybrid Oil Bath Bearing Protector #07502 fits 1.98" Hubs.

Stock# 5415002
Zinc finish Grade 8 wheel stud: overall length 2", thread length 1", insert length 1/2", cap diameter 3/4".

Stock# 5415055
The UFP disc brake caliper mounting adapter bracket for 5200-7000 lb. axles bolts to standard 5 hole brake flange.
S-Cad plated to resist corrosion.

Stock# 5415089
UFP 'D-Shape' axle spindle washer fits Ranger Trailers.

Stock# 5415058
Vault Hybrid Oil Bath Bearing Protector #05800 fits 2.328" Hubs.

Stock# 5415084
UFP trailer spring equalizer bars are used in multi-axle suspensions which accommodate Double Eye, C-Hook or Slipper style leaf springs. (1-3/4" spring width)   Dimensions A= 5-1/2" B=2-5/8"

Stock# 5415061
This proprietary blend of 50w oil is designed to provide long-term superior lubrication for boat trailer roller bearings. It is formulated from highly refined, stable, high viscosity index base oils, fortified with molybdenum and water repelling additives for superior anti-wear, anti-foam and rust protection.

Stock #5415087
UFP A-60 Zinc Plated Front Roller #34371

Stock #5415095
UFP A-70 & A-75 Brake Actuator Top Wear Pad #47710

Stock# 5415014
Replacement Latch / Hitch Pin Kit for A-84 and A-160 brake actuators.

Stock# 5415042
Replacement Push Rod for UFP single disc or tandem drum brake actuators.

Stock# 5415043
Replacement Push Rod for UFP tandem disc brake actuators.

Stock# 5415051
The UFP lockout bracket will allow you to back your trailer over soft ground or up a hill without your brakes surging.

Stock# 5415086
UFP Replacement Breakaway Cable Clip keeps the breakaway cable from being accidentally pulled. Fits A-60, A-75 and A-84 brake actuators.

Stock# 5415010
The UFP DB-35 black painted disc brake rotor is vented to help shed heat and can be used with trailer axles that have up to a 3750 lb. capacity. They will accept 13" to 15" wheels. (Lug nuts, bearings and seal are sold separately)

Stock# 5415029
The UFP DB-35  zinc plated disc brake rotor is vented to help shed heat and can be used with trailer axles that have up to a 3750 lb. capacity. They will accept 13" to 15" wheels. (Lug nuts, bearings and seal are sold separately)

Stock# 5415054
The UFP DB-35  zinc plated disc brake rotor is vented to help shed heat and can be used with trailer axles that have up to a 5200 lb. capacity. They will accept 15" to 16" 6-lug wheels. (Lug nuts, bearings and seal are sold separately)

Stock# 5415030
The model DB-35 disc brake caliper features an aluminum body and a stainless steel piston which helps provide superior corrosion resistance especially in salt water applications. It also includes pre-loaded organic brake pads and mounting bolts. The model DB-35 Brake Calipers include a 2-year limited warranty.

Stock# 5415031
The model DB-35 disc brake caliper features an aluminum body and a stainless steel piston which helps provide superior corrosion resistance especially in salt water applications. It also includes pre-loaded organic brake pads and mounting bolts. The model DB-35 Brake Calipers include a 2-year limited warranty.

Stock# 5415071
DB-35 Replacement Brake Caliper Spring Clip. Each DB-35 Caliper requires 2 spring clips. (Sold as each)

Stock # 5415073
UFP DB-35 Disc Brake Caliper Piston #33005. Replaces worn or corroded DB-35 caliper pistons.

Stock #5415072
UFP DB-35 Disc Brake Caliper Piston Seal #33004.

Stock #5415074
UFP DB-35 Disc Brake Caliper Slider Pin #33007.

Stock# 5415041
DB-35 Replacement Disc Brake Retainer/Anti-Rattle Clamp. Each DB-35 caliper requires one retainer.

Stock# 5415004
Replacement disc brake pad set for Gold Series DB-35 disc brakes. Contains 2 inner and 2 outer pads for one complete axle.

Stock# 5415011
The model DB-35 disc brake caliper features a zinc plated body, stainless steel brake pad guides and anti-rattle clips which help provide superior corrosion resistance especially in salt water applications. It also includes pre-loaded organic brake pads and mounting bolts. The model DB-35 Brake Calipers include a 2-year limited warranty.

Stock# 5415012
The model DB-35 disc brake caliper features a zinc plated body, stainless steel brake pad guides and anti-rattle clips which help provide superior corrosion resistance especially in salt water applications. It also includes pre-loaded organic brake pads and mounting bolts. The model DB-35 Brake Calipers include a 2-year limited warranty.

Stock# 5415082
The UFP DB-42 Oil Bath zinc plated disc brake rotor is vented to help shed heat and can be used with RANGER trailer axles that have up to a 4200 lb. capacity. They will accept 13" to 15" wheels.

Stock# 5415019
The UFP DB-42  zinc plated disc brake rotor is vented to help shed heat and can be used with trailer axles that have up to a 3750 lb. capacity. They will accept 13" to 15" wheels. (Lug nuts, bearings and seal are sold separately)

Stock# 5415053
The UFP DB-42  zinc plated disc brake rotor is vented to help shed heat and can be used with trailer axles that have up to a 5200 lb. capacity. They will accept 15" to 16" 6-lug wheels. (Lug nuts, bearings and seal are sold separately)

Stock# 5415044
S-Cad Plated steel mounting bracket for UFP DB-42 brake calipers. One required per caliper.

Stock# 5415077
DB-42 Replacement Brake Caliper Slider Bolt Boot. Each DB-42 Caliper requires 1 boot.

Stock# 5415003
DB-42 Replacement Brake Caliper Spring Clip. Each DB-42 Caliper requires 2 spring clips. (Sold as each)

Stock #5415076
UFP DB-42 Disc Brake Caliper Bolt 2-1/2" x 5/16" #33020

Stock #5415075
UFP DB-42 Disc Brake Caliper Piston #33010. Replaces worn or corroded DB-42 caliper pistons.

Stock #5415079
UFP DB-42 Disc Brake Caliper Piston Dust Boot #33035

Stock #5415080
UFP DB-42 Disc Brake Caliper Piston Seal #33040.

Stock# 5415005
DB-42 Replacement Disc Brake Retainer Clamp. Each DB-42 caliper requires one retainer.

Stock# 5415006
UFP Organic DIsc Brake Pad set includes one inner and one outer pad for use with DB-42 Disc Brake Calipers. (Replacement pads for 1-caliper)

Stock# 5415020
The DB-42 Replacement Brake Calipers are for trailers that are equipped with DB-42 Disc Brakes only. The DB-42 replacement caliper does not include brake pads, spring clips or retainer wires. Two pads, 2 spring clips and 1 retainer wire are necessary to complete installation.

Stock# 5415021
The DB-42 Replacement Brake Calipers are for trailers that are equipped with DB-42 Disc Brakes only. The DB-42 replacement caliper does not include brake pads, spring clips or retainer wires. Two pads, 2 spring clips and 1 retainer wire are necessary to complete installation.

Stock# 5415049
UFP 3/16" disc brake banjo fitting. Sold as each.

Stock# 5415013
The UFP Disc Brake Master Cylinder is compatible with the following hydraulic disc brake actuators: A-60, A-70, A-75, A-84 & A-160. It features an all aluminum design and a reverse valve drain tube for hookup with a reverse solenoid.

Stock# 5415018
The UFP Drum Brake Master Cylinder is compatible with the following hydraulic drum brake actuators: A-60, A-70, A-75, A-84 & A-160. It features an all aluminum design.

Stock# 5415017
Since disc brakes generate full braking power in reverse, a reverse lockout solenoid should be installed at the actuator before installation of disc brakes. The 12 volt solenoid valve connects to the tow vehicles back up light circuit for automatic brake lockout. Unit can be wired independently or adapted to trailer wire harness with a 5-flat plug on trailer and tow vehicle.

Stock# 5415070
Rubber Center Plug fits UFP EZ-Lube Zinc Plated Steel Dust Caps (#34751). Sold as each.

Stock# 5415090
UFP EZ-Lube Zinc Plated Steel Dust Cap can be used on most recreational trailer wheel hubs and drums. Designed for axle spindles with grease zerk fittings on the end. Rubber plug #32640 sold separately. Fits 1.98" I.D. hubs & drums.

Stock# 5415092
UFP EZ-Lube Zinc Plated Steel Dust Cap can be used on most recreational trailer wheel hubs and drums. Designed for axle spindles with grease zerk fittings on the end. Rubber plug #32640 sold separately. Fits 2.328" I.D. hubs & drums.

Stock# 5415059
Metal body construction with Double-Lip rubber seal. For use with 1-1/16" x 1-1/16" (L44649) trailer wheel bearings on UFP axles or axles that use stainless steel grease seal wear sleeves. Use Spindo Seal kits to use with other manufacturers axles that do not have wear sleeves.  Seal I.D. = 1.38"    Seal O.D. = 1.98"

Stock# 5415060
Metal body construction with Double-Lip rubber seal. For use with 1-3/4" x 1-1/4" 3/8" (25580 & LM67048) trailer wheel bearings on UFP axles or axles that use stainless steel grease seal wear sleeves. Use Spindo Seal kits to use with other manufacturers axles that do not have wear sleeves. Seal I.D. = 2.13"  Seal O.D. = 3.26"

Stock# 5415016
This mechanical brake lockout cap is an option for the model A-60 brake actuators. It allows trailers equipped with drum or disc brakes to be backed up over soft ground or up inclines without fully engaging the brakes. The cap is designed to disengage when the trailer is pulled forward after backing up. It replaces the existing plastic cap, has a zinc plating for superior corrosion resistance and is easy to install.

Stock# 5415069
The UFP 10-32 thread x 1/8" barb fitting is used on all UFP disc brake master cylinders and accepts the lockout solenoid return line.

Stock# 5415099
The UFP A-160 series hydraulic disc brake actuator was developed for tandem disc brakes and includes an electrical reverse lock-out solenoid that allows you to back-up without the brakes engaging. The solenoid is covered by the housing which provides protection against damage and the elements. The A-160 is also features a zinc plated finish for better corrosion resistance. Includes a 2 year limited warranty. (For Tandem Axle Disc Brake Systems)

Stock# 5415083
The UFP A-60 series replacement zinc plated inner member slide assembly replaces the coupler section of the A-60 series disc or drum brake actuator.  Includes the latch for 2" ball, a brake lockout bracket and actuator cap.
Note: Hydraulics are NOT included.

Stock# 5415027
The UFP A-60 series replacement inner member slide for hydraulic disc brakes fits into existing outer member housings and includes an electrical reverse lock-out solenoid that allows you to back-up without the brakes engaging. The A-60 also features plated internal parts for better corrosion resistance, sealed aluminum master cylinder, rubber boot installed on the push rod, the "Exclusive" UFP latching mechanism and it includes a 2 year limited warranty. Comes complete and ready to install. (For Single Axle Brake Systems Only)

Stock# 5415034
The UFP A-60 series replacement inner member slide for tandem axle hydraulic disc brakes fits into existing outer member housings and includes an electrical reverse lock-out solenoid that allows you to back-up without the brakes engaging. The A-60 also features plated internal parts for better corrosion resistance, sealed aluminum master cylinder, rubber boot installed on the push rod, the "Exclusive" UFP latching mechanism and it includes a 2 year limited warranty. Comes complete and ready to install.

Stock# 5415033
The UFP A-60 series replacement inner member slide for hydraulic drum brakes fits into existing outer member housings. The A-60 features a 7500 lb.capacity, plated internal parts for better corrosion resistance, sealed aluminum master cylinder, rubber boot installed on the push rod, the "Exclusive" UFP latching mechanism and it includes a 2 year limited warranty. Comes complete, is easy to bleed and is simple to replace or install.

Stock# 5415008
UFP zinc plated replacement break-away cable with s-hook for UFP Model A-60 hydraulic disc and drum brake actuators.

Stock# 5415068
UFP zinc plated replacement break-away cable with s-hook, bracket and clip for UFP Model A-60 hydraulic disc and drum brake actuators. Cable measures 17".

Stock# 5415040
UFP zinc plated replacement latch kit for UFP Model A-60 hydraulic brake actuators.

Stock# 54150093
UFP zinc plated replacement break-away cable with s-hook, bracket and clip for UFP Model A-75 and A-84 hydraulic disc and drum brake actuators. Cable measures 15".

Stock# 5415096
The UFP A-75 series replacement inner member slide for hydraulic disc brakes fits into existing outer member housings and includes an electrical reverse lock-out solenoid that allows you to back-up without the brakes engaging. The A-75 also features plated internal parts for better corrosion resistance, sealed aluminum master cylinder, rubber boot installed on the push rod, lever lock latching mechanism and a 2 year limited warranty. Comes complete and ready to install. (For Single Axle Brake Systems Only)

Stock# 5415097
The UFP A-75 series replacement inner member slide for tandem axle hydraulic disc brakes fits into existing outer member housings and includes an electrical reverse lock-out solenoid that allows you to back-up without the brakes engaging. The A-75 also features plated internal parts for better corrosion resistance, sealed aluminum master cylinder, rubber boot installed on the push rod, lever lock latching mechanism and a 2 year limited warranty. Comes complete and ready to install.

Stock# 5415098
The UFP A-75 series replacement inner member slide for hydraulic drum brakes fits into existing outer member housings. The A-75 features a 7500 lb.capacity, plated internal parts for better corrosion resistance, sealed aluminum master cylinder, rubber boot installed on the push rod, a lever lock latching mechanism and a 2 year limited warranty. Comes complete, is easy to bleed and is simple to replace or install.

Stock# 5415046
UFP zinc plated replacement latch kit for UFP Model A-75 hydraulic brake actuators.

Stock# 5415088
The UFP A-75 series replacement bolt on outer member slide assembly is designed to work with the A-60, A-75,and XR-84 hydraulic brake actuators. Zinc Plated for Maximum Corrosion Resistance.

Stock# 5415094
UFP zinc plated replacement latch kit for UFP Model A84 and A-160 hydraulic brake actuators.

Stock# 5415100
The UFP XR-64 series replacement inner member slide for single axlehydraulic disc brakes fits into existing outer member housings and includes an electrical reverse lock-out solenoid that allows you to back-up without the brakes engaging. Note: The Model XR-84 Surge Brake Actuator has an 8400 lb capacity is for single axle applications only.

Stock# 5415025
UFP O-Ring for 1.980" Gold Series oil bearing protectors #32742 (Sold as each)

Stock# 5415023
UFP O-Ring for 2.328" Gold Series oil bearing protectors #32741 (Sold as each)

Stock# 5415050
UFP replacement brake bleeder screw. Sold as each.

Stock# 5415028
UFP replacement shock absorber for all UFP A-60 and A-70 hydraulic disc and drum brake actuators.

Stock# 5415007
This 2-1/2" plastic cap is a direct replacement for all A-60 brake actuators. It is the outer access cap that covers the master cylinder fill plug.

Stock# 5415048
Direct replacement plastic fill plug for all UFP brake master cylinders.

Stock# 5415052
The UFP replacement wear pad protects the inner slide and outer housing on model A-60 Hydraulic Brake Actuators.

Stock# 5415066
UFP Retaining Snap Ring is used in all UFP brake actuators and fits the 3/4" main pins.

Stock# 5415085
UFP Shock Bushing for A-60, A-75 and A-84 brake actuators.

Stock# 5415009
UFP Stainless Steel wear sleeve for the grease seal shoulder is designed for 2900 - 3700 lb. axles.

Stock# 5415081
UFP Stainless Steel wear sleeve for the grease seal shoulder is designed for 5200 lb. axles.

Stock# 5415026
UFP Stainless Steel Press in Cap for Trailer Buddy Bearing Protectors. This wheel bearing protector cap fits inside #07500U bearing protectors. (Sold as each)

Stock# 5415067
UFP Replacement Top/Bottom Wear pad for A-60, A-75 and A-84 brake actuators. Thick version. Requires three per actuator. (Sold as each)

Stock# 5415065
UFP Replacement Top/Bottom Wear pad for A-60, A-75 and A-84 brake actuators. Thin version. Requires three per actuator. (Sold as each)