EZ-LOADER Boat Trailer Parts
My Cart (0)
Phone Sales & Technical Support
Mon - Thur 8am-6pm
Fri - Sat 8am-5pm

1-800-453-7379

EZ-LOADER Boat Trailer Parts

EZ Loader Factory Parts

For over 60 years, EZ Loader Trailers has stayed ahead of the curve in technology and design, and now stands among the leaders in the boat trailer industry. Attention to quality, dependability, and innovative product improvements has resulted in a national trailer company with distributors throughout the United States, Canada and the World. Trailer Parts Superstore stocks the items listed below which are factory parts unique to and/or made by EZ Loader Trailers.

EZ-LOADER Parts Listed By Manufacturers O.E.M. Part Numbers

Quantity Description Price

NEW ITEM!

EZ-LOADER Aluminum Fender Bracket (RR / LF) #250-032259-01

EZ-LOADER Aluminum Fender Bracket (RR / LF) #250-032259-01

Stock# 5291212
The Ez-Loader 15" long, heavy-duty pre-punched aluminum fender bracket fits on the right side rear or left side front of Ez-Loader trailers.  Mounting hardware not included. Designed to be used with plastic trailer fenders on aluminum framed trailers.

$31.95

NEW ITEM!

EZ-LOADER Aluminum Fender Bracket (LR / RF) #250-032260-01

EZ-LOADER Aluminum Fender Bracket (LR / RF) #250-032260-01

Stock# 5291211
The Ez-Loader 15" long, heavy-duty pre-punched aluminum fender bracket fits on the left side rear or right side front of Ez-Loader trailers. Mounting hardware not included. Designed to be used with plastic trailer fenders on aluminum framed trailers.

$31.95

EZ-LOADER Gray Plastic Fender for 8" to 12" Wheels #250-023692-10

EZ-LOADER Gray Plastic Fender for 8" to 12" Wheels #250-023692-10

Stock# 5291125
Length=25", Height=8-7/8", Width=6-7/8"
High impact gray composite fender fits single axle trailers with 8" to 12" trailer wheels. UV protected.
EZ-LOADER Part #250-023692-10

$43.95

EZ-LOADER Gray Plastic Fender for 13" Tires #250-023694-10

EZ-LOADER Gray Plastic Fender for 13" Tires #250-023694-10

Stock# 5291127
Length=42", Height=13-1/2", Width=8", Inside Length=30-1/4"
High impact gray polyethylene plastic two step fender fits single axle trailers with 13" trailer tires.
EZ-LOADER Part #250-023694-10

$67.50

EZ-LOADER Gray Plastic Fender for 13" Tires, w/Cutouts #250-023725-10

EZ-LOADER Gray Plastic Fender for 13" Tires, w/Cutouts #250-023725-10

Stock# 5291126
Length=42", Height=13-1/2", Width=8", Inside Length=30-1/4"
High impact gray polyethylene plastic two step fender with side marker light cutouts in the front and rear. Fits single axle trailers with 13" trailer tires.
EZ-LOADER Part #250-023725-10

$67.50

EZ-LOADER LF/RR Gray Plastic Fender for 13" Tires, w/Cutout

EZ-LOADER LF/RR Gray Plastic Fender for 13" Tires, w/Cutout

Stock# 5291131
Length=36-3/8", Height=13-1/2", Width=8", Inside Length=30-1/4"
Left Hand Front or Right Hand Rear gray plastic step fender with marker light cutout.
EZ-LOADER Part #250-023730-10

$67.50

EZ-LOADER RF/LR Gray Plastic Fender for 13" Tires, w/Cutout

EZ-LOADER RF/LR Gray Plastic Fender for 13" Tires, w/Cutout

Stock# 5291132
Length=36-3/8", Height=13-1/2", Width=8", Inside Length=30-1/4"
Right Hand Front or Left Hand Rear gray plastic step fender with marker light cutout.
EZ-LOADER Part #250-023729-10

$67.50

EZ-LOADER Gray Plastic Fender for 14" Tires, w/Cutouts #250-023712-10

EZ-LOADER Gray Plastic Fender for 14" Tires, w/Cutouts #250-023712-10

Stock# 5291128
Length=44-5/8", Height=14-3/8", Width=10-3/4", Inside Length=31-1/2"
High impact gray polyethylene plastic two step fender with side marker light cutouts in the front and rear. Fits single axle trailers with 14" trailer tires.
EZ-LOADER Part #250-023712-10

$81.95

EZ-LOADER LF/RR Gray Plastic Fender for 14" Tires, w/Cutout

EZ-LOADER LF/RR Gray Plastic Fender for 14" Tires, w/Cutout

Stock# 5291129
Length=38", Height=14-3/8", Width=10-3/4", Inside Length=31-1/2"
Left Hand Front or Right Hand Rear gray plastic step fender marker light cutout.
EZ-LOADER Part #250-023716-10

$78.95

EZ-LOADER RF/LR Gray Plastic Fender for 14" Tires, w/Cutout

EZ-LOADER RF/LR Gray Plastic Fender for 14" Tires, w/Cutout

Stock# 5291130
Length=38", Height=14-3/8", Width=10-3/4", Inside Length=31-1/2"
Right Hand Front or Left Hand Rear gray plastic step fender with marker light cutout.
EZ-LOADER Part #250-023715-10

$78.95

EZ-LOADER 14" Step Fender Bracket for 2" Wide Frame #250-023722-10

EZ-LOADER 14" Step Fender Bracket for 2" Wide Frame #250-023722-10

Stock# 5291143
Heavy-duty pre-punched galvanized step bracket mounts to 2" wide frame, one bracket required per step. Designed to mount 14" EZ-LOADER plastic trailer fenders.
EZ-LOADER Part #250-023722-10

$34.50

EZ-LOADER 14" Step Fender Bracket for 3" Wide Frame #250-023723-10

EZ-LOADER 14" Step Fender Bracket for 3" Wide Frame #250-023723-10

Stock# 5291144
Heavy-duty pre-punched galvanized step bracket mounts to 3" wide frame, one bracket required per step. Designed to mount 14" EZ-LOADER plastic trailer fenders.
EZ-LOADER Part #250-023723-10

$34.50

EZ-LOADER 13" Step Fender Bracket for 2" Wide Frame #250-023721-10

EZ-LOADER 13" Step Fender Bracket for 2" Wide Frame #250-023721-10

Stock# 5291142
Heavy-duty pre-punched galvanized step bracket mounts to 2" wide frame, one bracket required per step. Designed to mount 13" EZ-LOADER plastic trailer fenders.
EZ-LOADER Part #250-023721-10

$34.50

EZ-LOADER Spring Hanger for Composite Fenders (Single) #250-024125-10

EZ-LOADER Spring Hanger for Composite Fenders (Single) #250-024125-10

Stock# 5291203
The Ez-Loader single axle spring hanger/ composite fender bracket combo has 26" spring centers and 20-3/4" frame mounting holes. Mounting hardware not included. EZ-LOADER #250-024125-10

$54.95

EZ-LOADER Composite Fender Washer with Bushing #290-023740

EZ-LOADER Composite Fender Washer with Bushing #290-023740

Stock# 5291138
Washer with bushing is used as a spacer and cushion on composite fender mounting. Also acts as a vibration dampener to the fender. Accepts 3/8" bolts.
EZ Loader Part # 290-023740

$1.95

1-1/2" Square (1560 lbs.) EZ-Loader Trailer Axle #250-025073-10

1-1/2" Square (1560 lbs.) EZ-Loader Trailer Axle #250-025073-10

Stock# 5291110
Track Length = 52" Overall = 56" Spring Center = 40.5"
Hot dipped galvanized square stock EZ-LOADER factory axle with spindle nuts. Axle requires (2) each of the BT-150A 'Short Hub' and 3/4" Nut Retainer. No brake flange attached.

$133.95

2" Square (2700 lbs.) EZ-Loader Drop Center Axle #250-022304-10

2" Square (2700 lbs.) EZ-Loader Drop Center Axle #250-022304-10

Stock# 5291029
Track Length = 73.32" Overall = 77.19" Spring Center = 58.50"
Hot dipped galvanized square stock EZ-LOADER factory axle with spindle nuts. Axle requires (2) each of the BT-150A 'Short Hub' and 3/4" Nut Retainer. No brake flange attached.

$193.95

2" Square (3000 lbs.) EZ-Loader Drop Center Axle #250-023784-10

2" Square (3000 lbs.) EZ-Loader Drop Center Axle #250-023784-10

Stock# 5291108
Track Length = 84.75" Overall = 89.25" Spring Center = 70.25"  Requires EZ-Loader Grease Seal # 250-031468
Hot dipped galvanized square stock EZ-LOADER factory axle with spindle nuts. Axle requires (2) each of the tapered hubs/drums and 3/4" Nut Retainer. 4-hole brake mounting flanges are attached.

$267.95

2" Square (3700 lbs.) EZ-Loader Drop Axle #250-024287-10

2" Square (3700 lbs.) EZ-Loader Drop Axle #250-024287-10

Stock# 5291026
Track Length = 86.72" Overall = 91.75" Spring Center = 70.25"  Requires EZ-Loader Grease Seal # 250-031468
Hot dipped galvanized square stock EZ-LOADER factory axle with spindle nuts. Axle requires (2) each of the tapered hubs/drums and 3/4" Nut Retainer. 4-hole brake mounting flanges are attached.

$283.95

EZ-LOADER 2-1/2" Sq. Drop Center Torsion Axle (2700 lbs.) #300-023902-10

EZ-LOADER 2-1/2" Sq. Drop Center Torsion Axle (2700 lbs.) #300-023902-10

Stock# 5291140
Frame Center = 70.25" Overall = 93.50" Hub Face to Hub Face: 89.25"  Requires EZ-Loader Grease Seal #250-031468
Hot dipped galvanized square stock torsion axle with spindle nuts used on 4000 lb. tandem axle trailers with 13" tires.

$499.95

 EZ-LOADER 2-1/2" Sq. Drop Center Torsion Axle  (3700 lbs.) #300-023524-10

EZ-LOADER 2-1/2" Sq. Drop Center Torsion Axle (3700 lbs.) #300-023524-10

Stock# 5291139
Frame Center = 70.25" Overall = 91.38" Hub Face to Hub Face: 87.38"  Requires EZ-Loader Grease Seal #250-031468
Hot dipped galvanized square stock torsion axle with spindle nuts. 4-hole brake flange attached.

$559.95

EZ-LOADER Torsion Axle Mounting Hanger, 14" Tires #250-023726-10

EZ-LOADER Torsion Axle Mounting Hanger, 14" Tires #250-023726-10

Stock# 5291198
The EZ-Loader Torsion Axle Mounting Hanger attaches to 2" wide beams with u-bolts and holds torsion axles on single and tandem trailers with 14" tires and wheels.

$64.95

3/4"  ID Spindle Washer - 'D' Shape #290-023390

3/4" ID Spindle Washer - 'D' Shape #290-023390

Stock# 5291155
'D-Shape' axle spindle washer fits 3/4" thread spindles with 'flat spot'.

$1.50

EZ-Loader Spindle Washer #290-010453

EZ-Loader Spindle Washer #290-010453

Stock# 5291025
13/16" I.D. 'Tooth' style axle spindle washer for EZ-Loader axles

$1.95

EZ-LOADER Torsion Axle Mounting Hanger, 13" Tires #250-023749-10

EZ-LOADER Torsion Axle Mounting Hanger, 13" Tires #250-023749-10

Stock# 5291199
The EZ-Loader Torsion Axle Mounting Hanger attaches to 2" wide beams with u-bolts and holds torsion axles on single and tandem trailers with 13" tires and wheels.

$65.95

EZ-Loader Axle Spindle Nut #290-010452

EZ-Loader Axle Spindle Nut #290-010452

Stock# 5291024
13/16" I.D. axle spindle nut for EZ-Loader axles

$2.50

3" x 3" x 65.125" x .188" Galvanized Trailer Crossbar 250-021393-10

3" x 3" x 65.125" x .188" Galvanized Trailer Crossbar 250-021393-10

Stock# 5291114
Heavy-duty hot dip galvanized drop center trailer crossbar with .188" nominal wall thickness. Commonly used on boat trailers.  EZ-LOADER Part #250-021393-10

$194.50

3" x 3" x 68.25" x .125" Galvanized Trailer Crossbar #250-019151-10

3" x 3" x 68.25" x .125" Galvanized Trailer Crossbar #250-019151-10

Stock# 5291117
Heavy duty crossmember is used with 2x4 booms (main frames) that are 68.25" apart. Commonly used on EZ Loader boat trailers.  EZ-LOADER Part #250-019151-10

$202.95

3" x 3" x 68.25" x .187" Galvanized Trailer Crossbar #250-020467-10

3" x 3" x 68.25" x .187" Galvanized Trailer Crossbar #250-020467-10

Stock# 5291118
Heavy duty crossmember is used with 2x5 booms (main frames) that are 68.25" apart. Commonly used on EZ Loader boat trailers.  EZ-LOADER Part #250-020467-10

$229.95

EZ-LOADER Galvanized Crossmember Channel (Rear) #250-025075-10

EZ-LOADER Galvanized Crossmember Channel (Rear) #250-025075-10

Stock# 5291122
Heavy-duty pre-punched galvanized rear crossmember channel fits trailers with 2" x 3" main frames and 40.5" frame centers. It provides mounting holes for bunks, keel pads, keel roller assemblies and the tail lights. Measures 51-3/4" L x 3" W  EZ-LOADER Part #250-025075-10

$78.95

Crossbar Hanger for 4" Tall Frame Rail, 2-Position #250-011907-10

Crossbar Hanger for 4" Tall Frame Rail, 2-Position #250-011907-10

Stock# 5291116
Two position hot dip galvanized 3"x3" crossbar mounting bracket for use on 4" tall trailer frame rail. Commonly used on boat trailers.  EZ-LOADER Part #250-011907-10

$28.95

Crossbar Hanger for 5" Tall Frame Rail, 3-Position #250-014429-10

Crossbar Hanger for 5" Tall Frame Rail, 3-Position #250-014429-10

Stock# 5291115
Three position hot dip galvanized 3"x3" crossbar mounting bracket for use on 5" tall trailer frame rail. Commonly used on boat trailers.  EZ-LOADER Part #250-014429-10

$28.95

EZ-LOADER Bent Plate Crossbar Hanger 82° (5" Length)

EZ-LOADER Bent Plate Crossbar Hanger 82° (5" Length)

Stock# 5291120
Bent plate hot dip galvanized 5" length x 82° crossbar mounting hanger. Commonly used on boat trailers.  EZ-LOADER Part #250-021086-10
SUPPLIES LIMITED

Regular Price: $17.50

Special Price: $13.95


EZ-LOADER Single Roller w/Bent Arm #300-011724

EZ-LOADER Single Roller w/Bent Arm #300-011724

Stock# 5291104
EZ-LOADER 15" bent aluminum arm roller assembly with gray non-marking 4-7/8" dia x 3-1/2" wide wobble roller.

$37.95

EZ-LOADER Dual Wobble Roller Assembly #300-010591

EZ-LOADER Dual Wobble Roller Assembly #300-010591

Stock# 5291036
EZ-LOADER 2 wobble roller assembly on 13" aluminum arm with gray non-marking rollers. Also 13" from outside of roller to the outside of the other roller.

$81.95

EZ-LOADER Fixed Dual Rollers w/Mount #300-022101

EZ-LOADER Fixed Dual Rollers w/Mount #300-022101

Stock# 5291106
EZ-LOADER double wobble roller assembly on 12-1/2" long aluminum arm attached to galvanized mount for 3" wide channel.

$77.95

EZ-LOADER 4-Roller Quad Assembly #300-010590

EZ-LOADER 4-Roller Quad Assembly #300-010590

Stock# 5291102
EZ-LOADER 4 wobble roller quad assembly on 15" aluminum arms with gray non-marking rollers.

$129.95

EZ-LOADER Fixed Dual Roller Assembly, 12.5" #300-021944

EZ-LOADER Fixed Dual Roller Assembly, 12.5" #300-021944

Stock# 5291165
Double wobble roller assembly on 12.5" long straight aluminum arm.
EZ-LOADER part # 300-021944

$48.95

EZ-LOADER Fixed Dual Roller Assembly, 15" #300-022345

EZ-LOADER Fixed Dual Roller Assembly, 15" #300-022345

Stock# 5291171
Double wobble roller assembly on 15" long straight aluminum arm.
EZ-LOADER part # 300-022345

$49.95

EZ-LOADER Dual Roller Assembly, 20" Bent Arm #300-022213

EZ-LOADER Dual Roller Assembly, 20" Bent Arm #300-022213

Stock# 5291168
Double wobble roller assembly on 20" long bent aluminum arm.
EZ-LOADER part # 300-022213

$57.95

EZ-LOADER 18" Roller Assembly Arm, LF / RR #250-015747

EZ-LOADER 18" Roller Assembly Arm, LF / RR #250-015747

Stock# 5291003
EZ-LOADER Cast aluminum roller assembly arm for Left Front or Right Rear boat trailer locations.

$58.95

EZ-LOADER 18" Roller Assembly Arm, RF / LR #250-015748

EZ-LOADER 18" Roller Assembly Arm, RF / LR #250-015748

Stock# 5291004
EZ-LOADER Cast aluminum roller assembly arm for Right Front or Left Rear boat trailer locations.

$58.95

EZ-LOADER Ribbed Wobble Roller, (for 1-1/4" shaft) #250-071209

EZ-LOADER Ribbed Wobble Roller, (for 1-1/4" shaft) #250-071209

Stock# 5291002
EZ-LOADER boat trailer wobble roller with ribbed gray non-marking design fits all EZ-Loader wobble roller trailers.
4-7/8" diameter, 3-1/2" width, 1-1/4" shaft, 1-1/4" bearing length

$12.95

EZ-LOADER Quad Roller Mounting Strap #250-071013-10

EZ-LOADER Quad Roller Mounting Strap #250-071013-10

Stock# 5291161
The Quad Roller Mounting Strap is used in the quad roller assemblies. It measures 10-3/4" in length.
EZ-LOADER Part #250-071013-10

$12.50

EZ-LOADER Double Roller Arm #250-010431-01

EZ-LOADER Double Roller Arm #250-010431-01

Stock# 5291162
Double Aluminum Roller Arm is for use with 'multiple" roll systems. Will hold 2 rollers, one on each end. Attaches in the center to an aluminum arm. Ends are pre-drilled to accept hog ring fasteners.
EZ-LOADER Part #250-010431-01

$19.95

EZ-LOADER Roller Pivot Bar Mounting Bracket #250-013088-10

EZ-LOADER Roller Pivot Bar Mounting Bracket #250-013088-10

Stock# 5291186
Galvanized Pivot Bar Mounting Plate is attached to the cross-member with u-bolts and the pivot bar is sandwiched between two of these plates using 1/2" x 3-1/2" bolts. Sold as each.
EZ-LOADER Part #250-013088-10

$16.95

EZ-LOADER Heavy-Duty Roller Pivot Bar Mounting Bracket #250-014428-10

EZ-LOADER Heavy-Duty Roller Pivot Bar Mounting Bracket #250-014428-10

Stock# 5291187
Galvanized Pivot Bar Mounting Plate attaches to the cross-member and holds the front and rear cross-member that attach the roll system on larger trailers. Measures 7" and hast three height adjustment holes. Sold as each.
EZ-LOADER Part #250-014428

$16.95

EZ-LOADER Straight Roller Arm, 13" #250-021943-01

EZ-LOADER Straight Roller Arm, 13" #250-021943-01

Stock# 5291166
Single 13" Aluminum Roller Arm is meant to carry one roller on each end. Ends are pre-drilled to accept hog ring fasteners.
EZ-LOADER Part #250-021943-01

$18.95

EZ-LOADER Straight Roller Arm, 15" #250-010762-01

EZ-LOADER Straight Roller Arm, 15" #250-010762-01

Stock# 5291164
Single 15" Aluminum Roller Arm is for use with double-single slide arms. Meant to carry one roller on one end only. End is pre-drilled to accept hogring fasteners.
EZ-LOADER Part #250-010762-01

$18.95

EZ-LOADER Roller Pivot Bar 2" x 2" x 23.88" #250-01578-10

EZ-LOADER Roller Pivot Bar 2" x 2" x 23.88" #250-01578-10

Stock# 5291182
2" wide x 2" tall x 23.88" long .120" thick hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on boat trailers.
EZ-LOADER Part #250-01578-10

$59.95

EZ-LOADER Roller Pivot Bar 2" x 3" x 31.75" #250-071032-10

EZ-LOADER Roller Pivot Bar 2" x 3" x 31.75" #250-071032-10

Stock# 5291185
2" wide x 3" tall x 31.75" long .120" thick hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on boat trailers.
EZ-LOADER Part #250-071032-10

$63.95

EZ-LOADER Roller Pivot Bar 2" x 3" x 38.75" #250-071265-10

EZ-LOADER Roller Pivot Bar 2" x 3" x 38.75" #250-071265-10

Stock# 5291184
2" wide x 3" tall x 38.75" long .120" thick hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on boat trailers.
EZ-LOADER Part #250-071275-10

$69.95

EZ-LOADER Wobble Roller Bushing #250-024968

EZ-LOADER Wobble Roller Bushing #250-024968

Stock# 5291041
EZ-LOADER nylon wobble roller bushing fits the newer Quad Roller assemblies.
Dimensions:  3/4" I.D. x 1-5/16" O.D. x 1-1/8" long

$2.50

EZ-LOADER Wobble Roller Bushing #250-013492

EZ-LOADER Wobble Roller Bushing #250-013492

Stock# 5291037
EZ-LOADER nylon wobble roller bushing fits the gray ribbed roller.
Dimensions:  1" I.D. x 1-1/4" O.D. x 1-1/8" long

$2.95

EZ-LOADER 1" I.D. Wobble Roller Washer #290-01349

EZ-LOADER 1" I.D. Wobble Roller Washer #290-01349

Stock# 5291038
EZ-LOADER 1" I.D. x 2" O.D. wobble roller aluminum washer.

$1.75

EZ-LOADER 3/4" I.D. Wobble Roller Washer #290-002625

EZ-LOADER 3/4" I.D. Wobble Roller Washer #290-002625

Stock# 5291039
EZ-LOADER 3/4" I.D. x 2-1/2" O.D. x 1/8" Thickness wobble roller aluminum washer.

$1.95

EZ-LOADER 5/8" I.D. Wobble Roller Washer #290-022947

EZ-LOADER 5/8" I.D. Wobble Roller Washer #290-022947

Stock# 5291042
EZ-LOADER 5/8" I.D. x 1-1/2" O.D. wobble roller washer.

$1.50

EZ-LOADER 1-3/8" O.D. Plastic Delrin Washer #290-023061

EZ-LOADER 1-3/8" O.D. Plastic Delrin Washer #290-023061

Stock# 5291137
EZ-LOADER 1-3/8" O.D. x 1/2" I.D. (Derlin) washer. Delrin is a lightweight, low friction, and wear resistant plastic capable of operating in 200° Fahrenheit or higher.

$0.75

EZ-LOADER 2-5/8" O.D. Plastic Delrin Washer #290-015755

EZ-LOADER 2-5/8" O.D. Plastic Delrin Washer #290-015755

Stock# 5291135
EZ-LOADER 2-5/8" O.D. x 1/2" I.D. (Derlin) washer. Delrin is a lightweight, low friction, and wear resistant plastic capable of operating in 200° Fahrenheit or higher.

$2.25

EZ-LOADER 4" O.D. Plastic Delrin Washer #290-017329

EZ-LOADER 4" O.D. Plastic Delrin Washer #290-017329

Stock# 5291136
EZ-LOADER 4" O.D. x 11/16" I.D. (Derlin) washer. Delrin is a lightweight, low friction, and wear resistant plastic capable of operating in 200° Fahrenheit or higher.

$2.50

EZ-LOADER Wobble Roller Hog Ring #290-002650-02

EZ-LOADER Wobble Roller Hog Ring #290-002650-02

Stock# 5291040
EZ-LOADER hog ring secures boat trailer wobble rollers to arm and shaft assemblies. 13/16" I.D. x 1-1/2" O.D. before being compressed onto the roller arm.

$0.80

EZ-LOADER Roller Arm Poly Slide Wedge #250-021769

EZ-LOADER Roller Arm Poly Slide Wedge #250-021769

Stock# 5291033
3" long x 1-3/8" wide poly slide wedge fits EZ-LOADER roller arm assemblies. Flat bottom and concave top.

$3.50

EZ-LOADER Roller Bracket Retaining U-Bolt, 3/8" x 3/4" x 2" #290-021938

EZ-LOADER Roller Bracket Retaining U-Bolt, 3/8" x 3/4" x 2" #290-021938

Stock# 5291159
EZ-LOADER 3/8" x 3/4" x 2" u- bolt. Mounting hardware sold separately.
EZ-LOADER Part #290-021938

$1.95

EZ-LOADER Roller Bracket Retaining Plate #250-022211

EZ-LOADER Roller Bracket Retaining Plate #250-022211

Stock# 5291160
EZ-LOADER 3-1/2" x 2-1/4" roller bracket retaining plate. Used with EZ-Loader u-bolt #290-021938 (Sku #5291159) to attach roller assemblies. Mounting hardware and u-bolt sold separately.
EZ-LOADER Part #250-022211

$3.50

EZ-LOADER Roller Assembly Rocker Plate #250-010794-10

EZ-LOADER Roller Assembly Rocker Plate #250-010794-10

Stock# 5291103
EZ-LOADER 6-7/8" long x 2-3/4" wide galvanized wobble roller rocker plate. Plate rests on nylon glide (not included).

$15.50

EZ-LOADER Bunk/Roller Arm Mounting Bracket #250-021993-02

EZ-LOADER Bunk/Roller Arm Mounting Bracket #250-021993-02

Stock# 5291170
EZ-Loader mounting bracket for bunks boards and Double or Single roller arm assemblies.  This mounting bracket will allow the bunk/roller arm to pivot as needed. Holes = 3/8"

$2.95

EZ-LOADER 37-7/8" Roller Assembly Through Bolt #290-017133

EZ-LOADER 37-7/8" Roller Assembly Through Bolt #290-017133

Stock# 5291134
EZ-LOADER 37-7/8" x 1/2" hex head roller assembly through bolt.

$15.95

EZ-LOADER 25-3/4" Roller Assembly Through Bolt #290-015756

EZ-LOADER 25-3/4" Roller Assembly Through Bolt #290-015756

Stock# 5291133
EZ-LOADER 25-3/4" x 1/2" hex head roller assembly through bolt.

$10.50

EZ-LOADER 30" Bunk or Roller Mounting Tray #250-022047-10

EZ-LOADER 30" Bunk or Roller Mounting Tray #250-022047-10

Stock# 5291123
EZ-LOADER Galvanized steel bunk/roller mounting tray bolts to EZ-Loader support brackets to attach bunk or roller assemblies and set proper angle. Bracket measures 4" wide x 30" long.

$93.95

EZ-LOADER Quad Assy. Spacer Bushing #250-031426

EZ-LOADER Quad Assy. Spacer Bushing #250-031426

Stock# 5291100
EZ-LOADER 1-3/4" long x 1" O.D. x 3/4" I.D. spacer bushing for quad roller assembly.

$2.75

EZ-LOADER Quad/Multi Roller Mounting Strap Kit #300-015980

EZ-LOADER Quad/Multi Roller Mounting Strap Kit #300-015980

Stock# 5291105
EZ-LOADER Plated mounting strap and bolt kit attaches Quad-Roller assembly to pivot bar.

$17.50

EZ-LOADER Bunk Mounting Bracket (Hat Style) #250-022387-10

EZ-LOADER Bunk Mounting Bracket (Hat Style) #250-022387-10

Stock# 5291149
EZ-LOADER Heavy Duty galvanized hat style bunk mount bracket attaches the bunk to upright bunk brackets on 3x3 cross members on trailers not exceeding 4700 lbs capacity.

$9.95

EZ-LOADER Upright Support Bracket, Bunk/Roller (Short) #250-021786-10

EZ-LOADER Upright Support Bracket, Bunk/Roller (Short) #250-021786-10

Stock# 5291200
Galvanized Upright supports brackets for both bunk and roll trailers with 3" wide cross-members and is 9" tall.
EZ-LOADER Part #250-021786-10

$29.95

EZ-LOADER Upright Support Bracket, Bunk/Roller (Tall) #250-021787-10

EZ-LOADER Upright Support Bracket, Bunk/Roller (Tall) #250-021787-10

Stock# 5291201
Galvanized Upright supports brackets for both bunk and roll trailers with 3" wide cross-members and is 12" tall.
EZ-LOADER Part #250-021787-10

$34.95

EZ-LOADER Straight Roller Arm, Double/Single 12-1/2" #250-021992-01

EZ-LOADER Straight Roller Arm, Double/Single 12-1/2" #250-021992-01

Stock# 5291167
Double/Single 12-1/2" Aluminum Roller Arm is part of the roll assembly on the front of small Ez-Loader roller trailers. Pre-drilled holes for mounting and for hog rin fasteners. 1500# capacity.
EZ-LOADER Part #250-021992-01

$28.95

EZ-LOADER Quad Roller Arm, 15" #250-015630-01

EZ-LOADER Quad Roller Arm, 15" #250-015630-01

Stock# 5291163
Quad 15" heavy stock aluminum 15" roller bar that with the proper hardware, holds either 2 or 4 rollers on one end. The other end is left empty and slides in a bracket on the trailer for adjustability.
EZ-LOADER Part #250-015630-01

$19.95

EZ-LOADER Double Roller Arm with Pivot Hole 20" #250-022210-01

EZ-LOADER Double Roller Arm with Pivot Hole 20" #250-022210-01

Stock# 5291169
Double Aluminum Roller Arm is 20" in length and is to be used with a roller on each end. It has a center hole drilled to allow left-right pivoting. Ends are pre-drilled to accept hog ring fasteners.
EZ-LOADER Part #250-022210-01

$25.95

EZ-LOADER 4" x 18" Composite Bunk Cover (Black) #250-025648

EZ-LOADER 4" x 18" Composite Bunk Cover (Black) #250-025648

Stock# 5291208
The Ez-Loader Composite Bunk Covers fit over existing 4" wide carpeted bunks, 2 x 4's and aid the launching and loading of aluminum boats by providing a slippery surface for the boat to slide on. They are 18" long. One cover for every 2 linear feet of bunk. Sold as each. EZ-LOADER Part #250-025648

$15.95

EZ-LOADER 6" x 18" Composite Bunk Cover (Black) #250-025649

EZ-LOADER 6" x 18" Composite Bunk Cover (Black) #250-025649

Stock# 5291209
The Ez-Loader Composite Bunk Covers fit over existing 6" wide carpeted bunks, 2 x 6's and aid the launching and loading of aluminum boats by providing a slippery surface for the boat to slide on. They are 18" long. One cover for every 2 linear feet of bunk. Sold as each. EZ-LOADER Part #250-025648

$16.95

EZ-LOADER Bunk Mounting Bracket #250-024174

EZ-LOADER Bunk Mounting Bracket #250-024174

Stock# 5291147
11 gauge galvanized steel bunk mounting bracket bolts to bolster support brackets to attach bunks and set proper angle. Bracket measures 3" wide.

$6.95

EZ-LOADER H.D. Bunk Mounting Bracket #250-015202

EZ-LOADER H.D. Bunk Mounting Bracket #250-015202

Stock# 5291146
Heavy Duty galvanized steel bunk mounting bracket bolts to bolster support brackets to attach bunks and set proper angle. Bracket is 3/16" thick x 3" wide.

$6.95

EZ-LOADER Adjustable Bunk Bracket #250-024177-10

EZ-LOADER Adjustable Bunk Bracket #250-024177-10

Stock# 5291196
Galvanized Adjustable bunk bracket commonly used on Ez-Loader double wave runner trailers. Measures 15" tall.
EZ-LOADER Part #250-024177-10

$42.95

EZ-LOADER Pontoon Trailer Bunk Mounting Bracket #250-026776-10

EZ-LOADER Pontoon Trailer Bunk Mounting Bracket #250-026776-10

Stock# 5291202
Galvanized Bunk Mounting Bracket mounts the bunks on Ez-Loader pontoon trailers from 1999-present. Bracket has 3/8" mounting holes, a 12-1/4" span and a 4" width. Sold as each.
EZ-LOADER Part #250-026776-10

$25.95

EZ-LOADER PWC Strap Bunk Mounting Bracket Tie Plate #250-025540-02

EZ-LOADER PWC Strap Bunk Mounting Bracket Tie Plate #250-025540-02

Stock# 5291148
EZ-LOADER Heavy Duty galvanized strap bunk mounting bracket tie plate secures the strap bunk mounting bracket to the crossmember on EZ-Loader water vehicle trailers. 3/8" x 5.44" hole centers.

$8.50

EZ-LOADER PWC Strap Bunk Mounting Bracket #250-024175-10

EZ-LOADER PWC Strap Bunk Mounting Bracket #250-024175-10

Stock# 5291145
EZ-LOADER Heavy Duty galvanized strap bunk mounting bracket bolts to the cross member on EZ-Loader water vehicle trailers. Measures 3/16" x 3" x 9". Strap tie plate required for installation sold separately.

$17.50

EZ-LOADER Galvanized C-Hook Style Equalizer Bar #C-250-031579-10

EZ-LOADER Galvanized C-Hook Style Equalizer Bar #C-250-031579-10

Stock# 5291043
EZ-LOADER spring equalizer bar is commonly used with C-Hook leaf spring applications. Uses 9/16" shackle bolt holes on a 7" center. Requires center bushing (#5291044) sold separately.

$41.50

EZ-LOADER Center Bushing for Galvanized EQ Bar #280-031580

EZ-LOADER Center Bushing for Galvanized EQ Bar #280-031580

Stock# 5291044
EZ-LOADER molded bushing with 5/8" steel sleeve center bolt hole fits inside galvanized equalizer bar (#5291043) sold separately.

$10.95

EZ-LOADER Center Bolt for Galvanized EQ Bar #290-001669

EZ-LOADER Center Bolt for Galvanized EQ Bar #290-001669

Stock# 5291005
EZ-LOADER 5/8"-11 x 4-1/2" mounting bolt for the molded bushing (#5291044) and galvanized equalizer bar.

$9.50

EZ-LOADER Leaf Spring Spring Bushing & Bolt Kit #300-015973

EZ-LOADER Leaf Spring Spring Bushing & Bolt Kit #300-015973

Stock# 5291107
EZ-LOADER Leaf spring mounting kit will replace steel or nylon spring bushings.
I.D. = 9/16" O.D. = 3/4" & 1" Length = 2"

$19.95

EZ-LOADER Steel Leaf Spring Bushing, 9/16" I.D. #250-031423

EZ-LOADER Steel Leaf Spring Bushing, 9/16" I.D. #250-031423

Stock# 5291101
Steel Spring Bushings are designed to create a protective barrier between the shackle bolt and the spring. Steel Bushings allow the spring to move with minimum damage.    I.D. = 9/16" O.D. = 3/4" Length = 1-31/32"

$1.95

EZ-LOADER Universal Spring Hanger, 2" or 3" Frames #250-015522-10

EZ-LOADER Universal Spring Hanger, 2" or 3" Frames #250-015522-10

Stock# 5291156
Heavy-duty galvanized universal spring hanger for 2" or 3" wide frames. Mounting holes will accept 1/2" bolts.

$24.50

EZ-LOADER Leaf Spring Hanger for 2" x 3" Frames #250-014861-10

EZ-LOADER Leaf Spring Hanger for 2" x 3" Frames #250-014861-10

Stock# 5291150
Heavy-duty galvanized leaf spring hanger for 2" x 3" frames. Measures 2-1/8" W x 6-3/4" L. Mounting holes will accept 1/2" bolts.

$23.95

Aluminum Oil Bath Cap with O-Ring for 10" Drums #250-031620

Aluminum Oil Bath Cap with O-Ring for 10" Drums #250-031620

Stock# 5291153
2.11" O.D. threaded aluminum oil bath cap with O-Ring fits 10" Reliable hubs and drums.

$16.95

Aluminum Oil Bath Cap with O-Ring for 12" Drums #250-031621

Aluminum Oil Bath Cap with O-Ring for 12" Drums #250-031621

Stock# 5291154
2.48" O.D. threaded aluminum oil bath cap with O-Ring fits 12" Reliable hubs and drums.

$21.95

EZ-LOADER 1-3/8" x 1-1/16", 5 on 4.5" Oil Bath Hub Kit #300-029534

EZ-LOADER 1-3/8" x 1-1/16", 5 on 4.5" Oil Bath Hub Kit #300-029534

Stock# 5291157
Complete 5 hole oil bath (2005 to present) hub kit for axles with tapered spindles includes hub with races, bearings, seal, washers, nut, retainer nut and cotter pin, screw on bearing protector and lug nuts.

$79.95

EZ-LOADER 1-3/4" x 1-1/4", 6 on 5.5" Oil Bath Hub Kit #300-029535

EZ-LOADER 1-3/4" x 1-1/4", 6 on 5.5" Oil Bath Hub Kit #300-029535

Stock# 5291158
This kit replaces grease hubs on 15", 16" and 16.5" 6-hole wheels. Complete oil bath hub kit for axles with tapered spindles includes hub with races, bearings, seal, washers, nut, retainer nut and cotter pin, screw on bearing protector and lug nuts.
NOTE: This kit will not work with the EZ Loader Sure-Lube flow thru axles (made from 1990 thru 2001)

$99.95

EZ-LOADER Galvanized Winch Mount Assembly w/Roller #300-025023-10

EZ-LOADER Galvanized Winch Mount Assembly w/Roller #300-025023-10

Stock# 5291190
EZ-Loader Galvanized Winch Mount assembly includes a 900 lb.capacity winch with strap and hook, bow eye chain and bow roller. Measures 13" long and 3-3/4" wide. Mounting hardware sold separately. EZ-LOADER #300-025023-10

$114.95

EZ-LOADER Galvanized Winch Mount Bracket (2" x 3") #250-021785-10

EZ-LOADER Galvanized Winch Mount Bracket (2" x 3") #250-021785-10

Stock# 5291188
Ez-Loader Galvanized Winch Mount fits 2" x 3" winch stands that measure 16" or 25" tall. Its used on trailers with a capacity from 1525 lbs. to 2350 lbs. Winch mount bracket bolts to trailer winch post for attachment of trailer winch and bow stop roller assembly. Mounting hardware sold separately. EZ-LOADER #250-021785-10

$57.95

EZ-LOADER Galvanized Winch Mount Bracket (3" x 3") #250-021779-10

EZ-LOADER Galvanized Winch Mount Bracket (3" x 3") #250-021779-10

Stock# 5291189
Ez-Loader Galvanized Winch Mount fits 3" x 3" winch stands and are used on trailers with a capacity from 2350 lbs. to 5200 lbs. Winch mount bracket bolts to trailer winch post for attachment of trailer winch and bow stop roller assembly. Mounting hardware sold separately. EZ-LOADER #250-021779-10

$82.95

EZ-LOADER V-Block Bow Stop Assembly #300-014128

EZ-LOADER V-Block Bow Stop Assembly #300-014128

Stock# 5291181
V-block bow stop on 19" galvanized straps fits on all 3" wide tongues and adds extra support to your bow/keel area.
EZ-LOADER part # 300-014128

$59.95

EZ-LOADER Double V-Block Bow Stop Assembly #300-014750

EZ-LOADER Double V-Block Bow Stop Assembly #300-014750

Stock# 5291180
Double V-block on 19" galvanized straps for bow stop or winch stand applications.
EZ-LOADER Part #300-014750

$74.95

EZ-LOADER Galvanized Frame/Tongue Plate, 3" Frames #250-022205-10

EZ-LOADER Galvanized Frame/Tongue Plate, 3" Frames #250-022205-10

Stock# 5291205
The Ez-Loader frame to tongue connector allows you to use the detachable tongue feature of the trailer by removing the 2 center carriage bolts to remove the tongue for easier storage. This part fits trailers with 2" x 3" frames and 3" x 3" tongues only. EZ-LOADER Part #250-022205-10

$56.95

EZ-LOADER Galvanized Frame/Tongue Plate, 4" Frames #250-022206-10

EZ-LOADER Galvanized Frame/Tongue Plate, 4" Frames #250-022206-10

Stock# 5291204
The Ez-Loader frame to tongue connector allows you to use the detachable tongue feature of the trailer by removing the 2 center carriage bolts to remove the tongue for easier storage. This part fits trailers with 2" x 4" frames and 3" x 4" tongues only. EZ-LOADER Part #250-022206-10

$56.95

EZ-LOADER Taillight Cover for 2" Frames, Gray (Left Side) #250-025171-10

EZ-LOADER Taillight Cover for 2" Frames, Gray (Left Side) #250-025171-10

Stock# 5291177
The Ez-Loader Left Side Composite Taillight Cover fits on both 2" x 5" and 2" x 4" frames. Color: Gray.
EZ-LOADER Part #250-025171-10

$9.95

EZ-LOADER Taillight Cover for 2" Frames, Gray (Right Side) #250-025170-10

EZ-LOADER Taillight Cover for 2" Frames, Gray (Right Side) #250-025170-10

Stock# 5291176
The Ez-Loader Right Side Composite Taillight Cover fits on both 2" x 5" and 2" x 4" frames. Color: Gray.
EZ-LOADER Part #250-025170-10

$9.95

EZ-LOADER Taillight Cover for 3" Frames, Gray (Left Side) #250-025173-10

EZ-LOADER Taillight Cover for 3" Frames, Gray (Left Side) #250-025173-10

Stock# 5291179
The Ez-Loader Left Side Composite Taillight Cover fits on both 3" x 5" and 3" x 4" frames. Color: Gray.
EZ-LOADER Part #250-025173-10

$9.95

EZ-LOADER Taillight Cover for 3" Frames, Gray (Right Side) #250-025174-10

EZ-LOADER Taillight Cover for 3" Frames, Gray (Right Side) #250-025174-10

Stock# 5291178
The Ez-Loader Right Side Composite Taillight Cover fits on both 3" x 5" and 3" x 4" frames. Color: Gray.
EZ-LOADER Part #250-025174-10

$9.95

EZ-LOADER Galvanized Taillight Bracket, 4" Frame (LH) #250-024939-10

EZ-LOADER Galvanized Taillight Bracket, 4" Frame (LH) #250-024939-10

Stock# 5291173
The EX-Loader Left Side Taillight bracket is made of heavy-duty galvanized steel for long lasting durability. Holes are pre-drilled and accept most taillights. Mounting hardware not included. Fits 4" tall frames
EZ-LOADER Part #250-024939-10

$18.95

EZ-LOADER Galvanized Taillight Bracket, 4" Frame (RH) #250-024938-10

EZ-LOADER Galvanized Taillight Bracket, 4" Frame (RH) #250-024938-10

Stock# 5291172
The Ez-Loader Right Side Taillight bracket is made of heavy-duty galvanized steel for long lasting durability. Holes are pre-drilled and accept most taillights. Mounting hardware not included. Bracket for 4" tall frames.
EZ-LOADER Part #250-024938-10

$18.95

EZ-LOADER Galvanized Taillight Bracket, 5" Frame (RH) #250-024944-10

EZ-LOADER Galvanized Taillight Bracket, 5" Frame (RH) #250-024944-10

Stock# 5291174
The Ez-Loader Right Side Taillight bracket is made of heavy-duty galvanized steel for long lasting durability. Holes are pre-drilled and accept most taillights. Mounting hardware not included. Bracket for 5" tall frames.
EZ-LOADER Part #250-024944-10

$16.95

EZ-LOADER Galvanized Taillight Bracket, 5" Frame (LH) #250-024945-10

EZ-LOADER Galvanized Taillight Bracket, 5" Frame (LH) #250-024945-10

Stock# 5291175
The Ez-Loader Left Side Taillight bracket is made of heavy-duty galvanized steel for long lasting durability. Holes are pre-drilled and accept most taillights. Mounting hardware not included. Fit 5" tall frame.
EZ-LOADER Part #250-024945-10

$16.95

EZ-LOADER Galvanized Spare Trailer Tire Mount #300-017444-10

EZ-LOADER Galvanized Spare Trailer Tire Mount #300-017444-10

Stock# 5291195
The EZ-Loader Galvanized Spare Trailer Tire Mount fits 2" x 3" frames and includes all hardware needed to install your spare.  EZ-LOADER # 300-017444-10

$79.95

EZ-LOADER U-Bolt, 5/16" x 1-1/2" x 2-1/4" #290-022892

EZ-LOADER U-Bolt, 5/16" x 1-1/2" x 2-1/4" #290-022892

Stock# 5291192
EZ-LOADER 5/16" x 1-1/2" x 2-1/4" u- bolt. Mounting hardware sold separately.
EZ-LOADER Part #290-022892

$2.95

EZ-LOADER U-Bolt, 5/16" x 1-1/2" x 3-1/4" #290-023119

EZ-LOADER U-Bolt, 5/16" x 1-1/2" x 3-1/4" #290-023119

Stock# 5291191
EZ-LOADER 5/16" x 1-1/2" x 3-1/4" u- bolt. Mounting hardware sold separately.
EZ-LOADER Part #290-023119

$2.95

EZ-LOADER 3" x 1" Galvanized 3-Hole Frame Strap  #250-027684-02

EZ-LOADER 3" x 1" Galvanized 3-Hole Frame Strap #250-027684-02

Stock# 5291194
The 3" x 1" x 3/16" three hole galvanized frame strap is used on small winch assemblies to even up the winch bracket.
Ez-Loader #250-027684-02

$3.95

EZ-LOADER 7-1/4" x 1-1/2" Galvanized Frame Strap  #250-022229-10

EZ-LOADER 7-1/4" x 1-1/2" Galvanized Frame Strap #250-022229-10

Stock# 5291206
The 7-1/4" x 1-1/2" x 1/4" galvanized frame strap is used with triangle shaped frame to tongue connectors on single axle trailers from 1994 to present. Ez-Loader #250-022229-10

$6.95

EZ-LOADER 13-1/4" x 1-1/2" Galvanized Bent Frame Strap  #250-022526-10

EZ-LOADER 13-1/4" x 1-1/2" Galvanized Bent Frame Strap #250-022526-10

Stock# 5291207
The 13-1/4" x 1-1/2" x 1/4" galvanized bent frame strap is used with triangle shaped frame to tongue connectors on single axle trailers from 1994 to present. Ez-Loader #250-022526-10

$13.95

EZ-LOADER P-Bolt, 5-1/8" x 1/2" #290-013381-02

EZ-LOADER P-Bolt, 5-1/8" x 1/2" #290-013381-02

Stock# 5291197
The Ez-Loader P style bolt replaces older style J bolts used to attach tail light plates to frames. Dimensions:  5-1/8" x 1/2".
EZ-LOADER Part #290-013381-02

$2.95

EZ-LOADER 5/16" U-Bolt Lock Nut #290-002557

EZ-LOADER 5/16" U-Bolt Lock Nut #290-002557

Stock# 5291193
Ez-loader 5/16" u-bolt locknut for use with 5/16" stock u-bolts.
EZ-LOADER Part #290-002557

$0.75