HYDRASTAR Surge Brake Conversion System 1,600 PSI #381-9067

Rating:
93 % of 100

Stock# 5426018
The Hydrastar Marine Surge Brake Conversion Kit includes everything you will need to convert the outdated surge brake system to an electric over hydraulic trailer brake system. Simply wire the brake actuator (1,600 psi), with the hardware provided, insert the brake line in to the actuator, and say goodbye to your surge brake problems.

$980.00
SKU
5426018

The Hydrastar Marine Surge Brake Conversion Kit is the solution to all the problems associated with surge trailer brakes.  Unlike surge brakes, which are inertia based hydraulics, Hydrastar gives you all the brake control from inside of the tow vehicle.  Never slide down the boat ramp again, and take control of your trailer brakes.  This kit consist of everything you will need to convert the outdated surge brake system to an electric over hydraulic trailer brake system. Simply wire the 1,600 psi brake actuator with the hardware provided, insert the brake line in to the actuator, and say goodbye to all your surge brake problems.

Kit Includes:

  • Hydrastar Marine EOH Actuator (1,600 psi)
  • Break-Away Battery Kit (Battery with built in charger and break away switch)
  • 7-way Trailer Plug
  • Junction Box
  • 1 – 12 ga Grounding Wire
  • 8 – 14 ga Ring Connectors (heat shrink)
  • 9 – 12 ga Ring Connectors (heat shrink)
  • 1 – 14 ga Butt Connector (heat shrink)
  • 1 – 12 ga Butt Connector (heat shrink)
  • 6 ft. Wire Loom
  • 4 – Adhesive Mounting Pads
  • 4 – Self Tapping Screws

 

Brand
Cargo Towing Solutions
Manufacturer Part Number
381-9067
More Information
Product Name HYDRASTAR Surge Brake Conversion System 1,600 PSI #381-9067
Write Your Own Review
You're reviewing:HYDRASTAR Surge Brake Conversion System 1,600 PSI #381-9067
Your Rating
We found other products you might like!