LOADRITE Boat Trailer Parts

Stock# 1041325
Fits LoadRite 1-3/8" I.D. wobble rollers on 2003 & newer trailers.
LoadRite Part # 1002.61

Stock# 1041330
Loadrite center section black plastic bunk cover. Fits 2" x 6" bunk boards and comes in a 36" length. Center section is best used with end pieces which are sold separately. Includes 1- 36" center section for 2" x 6" bunk boards.

Stock# 1041329
Loadrite finished edge black plastic bunk cover. Fits 2" x 6" bunk boards and measures 24" in length.
Includes 1- 2" x 6" x 24" finished edge section for 2" x 6" bunk boards.

Stock# 1041331
Loadrite finished edge black plastic bunk cover. Fits 2" x 6" bunk boards and measures 12" in length.
Includes (1) - 2" x 6" x 12" finished edge section for 2" x 6" bunk boards.

Stock# 1041328
Loadrite Black plastic bunk cover. Fits 2" x 4" bunk boards and comes in 4' lengths. Bunk covers are ideal for painted, fiberglass, or aluminum boats.  Includes 1- Right Hand Side 4 ft. section for 2" x 4" bunk boards.

Stock# 1041327
Loadrite Black plastic bunk cover. Fits 2" x 4" bunk boards and comes in 4' lengths. Bunk covers are ideal for painted, fiberglass, or aluminum boats.  Includes 1- Left Hand Side 4 ft. section for 2" x 4" bunk boards.

Stock# 1041289
The LOADRITE Two-Place Watercraft Crossbar Retrofit Kit converts double dipped cross members to straight style cross members on dual watercraft trailers. This is a complete kit and includes everything needed

Stock# 1041322
Loadrite 8' x 2" x 4" pressure treated bunk board covered with Loadrite's silver  plastic bunk covering. Replace damaged or worn Loadrite bunks and renew trailer appearance with new plastic covered bunk boards which are ideal for painted, fiberglass, or aluminum boats. Hardware and brackets are not included. (Sold as each)

Stock# 1041321
Loadrite 8' x 2" x 4" pressure treated bunk board covered with Loadrite's silver  plastic bunk covering. Replace damaged or worn Loadrite bunks and renew trailer appearance with new plastic covered bunk boards which are ideal for painted, fiberglass, or aluminum boats. Hardware and brackets are not included. (Sold as each)

Stock# 1041324
8' x 2" x 6" pressure treated bunk board covered with Loadrite's black plastic bunk covering. Replace damaged or worn Loadrite bunks and renew trailer appearance with new plastic covered bunk boards which are ideal for painted, fiberglass, or aluminum boats. (Sold as each)

Stock# 1041323
8' x 2" x 6" pressure treated bunk board covered on all sides with deluxe marine carpet. (Sold as each)
Replace damaged or worn Loadrite bunks and renew trailer appearance with new marine grade carpeted bunk board.

Stock# 1041262
Length = 21.5", Height = 6.38", Width = 7"    High impact white composite fender fits Loadrite Bandit and BZ trailers with 8" to 12" wheels. Mounting hardware sold separately. LOADRITE Part #2301.03

Stock# 1041252
Length = 21.5", Height = 6.38", Width = 7"   High impact gray composite fender fits Loadrite Bandit and BZ trailers with 8" to 12" wheels. Mounting hardware sold separately. LOADRITE Part #2301.07

Stock# 1041219
Length=42", Height=12.75", Width=9.75", Inside Length=28-1/2"   Right Hand high impact white polyethylene plastic step fender with amber side marker light for 14" trailer tires. LOADRITE Part #6283.10R

Stock# 1041220
Length=42", Height=12.75", Width=9.75", Inside Length=28-1/2"   Left Hand high impact white polyethylene plastic step fender with amber side marker light for 14" trailer tires. LOADRITE Part #6283.10L

Stock# 1041263
Length=42", Height=12.75", Width=9.75", Inside Length=28-1/2"   Right Hand or Left Hand high impact white polyethylene plastic step fender without side marker light for 14" trailer tires. LOADRITE Part #6283.02

Stock# 1041251
Length=31-3/4", Height=12", Width=8", Wheel Size=13" or 14"
.060 gauge diamond plate aluminum trailer tire fender.

Stock# 1041286
Length=33-1/2", Height=14.75", Width=9", Wheel Size=15"
.060" gauge diamond plate aluminum trailer tire fender.

Stock# 1041306
Length = 35.3", Height = 17.50", Width = 9", Wheel Size = 15" & 16", Arc = 57"
.083" gauge diamond plate aluminum trailer tire fender.
Mounting hardware sold separately.

Stock# 1041246
Length=67", Height=16.38", Width=9.50", Wheel Size=13"-14". Made of 16 gauge galvanized steel.
Loadrite Part #6138.51

Stock# 1041247
Length=72", Height=17.50", Width=9.50", Wheel Size=15"-16.5". Made of galvanized steel.
Loadrite Part #6138.72

Stock# 1041318
14" long, pre-punched galvanized step bracket mounts under 3" frame on right hand side of trailer. Allows up to 3-1/4" offset of fender from trailer frame. Designed to be used with steel and plastic trailer fenders.

Stock# 1041319
14" long, pre-punched galvanized step bracket mounts under 3" frame on left hand side of trailer. Allows up to 3-1/4" offset of fender from trailer frame. Designed to be used with steel and plastic trailer fenders.

Stock# 1041217
Galvanized trailer fender mounting bracket is designed for small plastic fenders on 14' model LOADRITE trailers.

Stock# 1041209
Factory replacement axle for LOADRITE Boat Trailers.  Galvanized axle stock weldment only.  Wheel Hubs, bearings & spindle nuts sold separately.     Track Length = 61.50" Spring Center = 51"

Stock# 1041261
Factory replacement axle for LOADRITE Boat Trailers. Galvanized axle stock, includes pre-lubed hubs with bearings, seals and super lube dust caps. Wheel hubs have rear tapped zerk fitting for easy installation of fresh bearing grease.
Track Length = 51.25" Spring Center = 38.5"   Hub Assembly  =  5-on-4.5" lug pattern

Stock# 1041210
Factory replacement axle for LOADRITE Boat Trailers. Galvanized axle stock, includes pre-lubed hubs with bearings, seals and super lube dust caps. Wheel hubs have rear tapped zerk fitting for easy installation of fresh bearing grease.
Track Length = 56.50" Spring Center = 45"   Hub Assembly = 5-on-4.5" lug pattern

Stock# 1041300
Factory replacement axle for LOADRITE Boat Trailers. Galvanized axle stock, includes pre-lubed hubs with bearings, seals and super lube dust caps. Wheel hubs have rear tapped zerk fitting for easy installation of fresh bearing grease.
Track Length = 68.75" Spring Center = 58"   Hub Assembly  =  5-on-4.5" lug pattern

Stock# 1041294
Factory replacement axle for LOADRITE Boat Trailers. Galvanized axle stock, includes pre-lubed hubs with bearings, seals and caps with grease fittings.  Fits Loadrite WV2200 trailers.
Track Length = 90.5" Spring Center = 78.5"   Hub Assembly = 5-on-4.5" lug pattern

Stock# 1041137
Factory replacement axle for LOADRITE Boat Trailers. Galvanized axle stock, includes pre-lubed hubs with bearings, seals and caps with grease fittings.
Track Length = 72" Spring Center = 58"    Hub Assembly = 5-on-4.5" lug pattern

Stock# 1041248
Factory replacement axle for LOADRITE Boat Trailers. Galvanized axle stock with 1-3/8" x 1-1/16" tapered spindles.
Add your own hubs, drums or Disc Brake assemblies.     Track Length = 87" Spring Center = 70"

Stock# 1041140
Factory replacement axle for LOADRITE Boat Trailers. Galvanized axle stock, includes pre-lubed hubs with bearings, seals and caps with grease fittings.
Track Length = 87" Spring Center = 70"   Hub Assembly = 5-on-4.5" lug pattern

Stock# 1041297
Hot dipped galvanized 2" x3" factory replacement LOADRITE axle with spindle nuts. Axle requires (2) each of the 6-lug tapered hubs. 5-hole brake mounting flanges are attached.    Track Length = 87"  Spring Center = 70"

Stock# 1041292
Track Length = 73.75" Frame Center = 58"
Galvanized axle assembly with 1-3/8" x 1-1/16" tapered spindle.

Stock# 1041291
Track Length = 86.75" Frame Center = 72"
Galvanized axle assembly with 1-3/8" x 1-1/16" tapered spindle.

Stock# 1041264
Factory replacement torsion axle for LOADRITE Boat Trailers. Galvanized axle assembly with 1-3/8" x 1-1/16" tapered spindles.     Track Length = 87.25"  Frame Center = 70"

Stock# 1041033
Fits 1.25" x 1.75" tapered spindle, 8 bolt LoadRite hub & Dexter Drum  (click to see part #'s)

Stock# 1041013
Fits 1.25" x 1.75" tapered spindle, 6 bolt LoadRite hub made after 06/98 (click to see part #'s)

Stock# 1041007
Fits 1.25" x 1.75" tapered spindle, 6 bolt LoadRite hub made through 06/98 (click to see part #'s) with 2.125" ID grease seal for 5.2k axles

Stock# 1041002
Clear plastic wheel bearing protector allows for visual inspection of grease color and capacity. Stainless Spring loaded fill plunger with overfill prevention hole help keep bearings packed at all times.

Stock# 1041245
Fits 2.441" inside diameter hubs, (1) per pack.

Stock# 1041011
Axle nut retainer for 13/16" 'D' style spindles with cotter pin hole. Common on LOADRITE & EZ-LOADER axles.

Stock# 1041298
LOADRITE galvanized tandem spring support weldment for 26" open end slipper spring applications. Measures 62.5" in total length and is made for 3" wide frames.

Stock# 1041308
LOADRITE galvanized spring support weldment for 26" heavy-duty spring applications. Measures 4.5" x 5.25" x 29" and is used on 3" wide frames.

Stock# 1041253
Galvanized open end style spring equalizer plate for 1-3/4" wide springs measures 3" x 8.25". Shackle bolt holes are on a 7" center.
LOADRITE Part #4050.006

Stock# 1041317
Universal aluminum wheel and hub spacer for 5 lug on 4-1/2", 4-3/4" or 5" centers.
Dimensions:  Width = 5/16"   Outside Diameter = 6-1/2"   Center hole = 3-1/2"

Stock# 1041180
4-3/4" diameter, 3-1/2" width, 1-1/8" shaft, 1-1/4" bearing length
LoadRite Part# 4026.01

Stock# 1041287
5" diameter, 3" width, 1-3/8" shaft bushing for use with Loadrite Logo Bushings. Yellow TPR (Thermal Plastic Roller) wobble roller cushions your boat from harsh impact, has a lower durometer than polyurethane rollers and will not mark your boat like black rubber rollers. For use with LOADRITE Logo Bushings

Stock# 1041290
5" diameter, 3" width, 1-1/8" shaft bushing for use as a black rubber roller conversion kit. Yellow TPR (Thermal Plastic Roller) wobble roller cushions your boat from harsh impact, has a lower durometer than polyurethane rollers and will not mark your boat like black rubber rollers. For use as a LOADRITE Black Roller Conversion.

Stock# 1041274
2-Wheel wobble roller assembly, 12-1/4" centers, fits 2" frames.
Non-marking yellow Poly rollers. LoadRite Part #6074.02

Stock# 1041273
2-Wheel galvanized assembly, fits 2" frames.
Non-marking grey Poly rollers. LoadRite Part #6074.05

Stock# 1041018
2-Wheel right side mount, 15-1/2" to 18-1/2" centers, fits 2" frames.
Non-marking yellow Poly rollers. LoadRite Part #6072.18

Stock# 1041019
2 Wheel left side mount, 15-1/2" to 18-1/2" centers, fits 2" frames.
Non-marking yellow Poly rollers. LoadRite Part #6072.20

Stock# 1041299
Loadrite I-Beam replacement roller assembly with non-marking TPR rollers.
LoadRite Part #6155.01

Stock# 1041017
4 Wheel left or right mount, 12" to 20" centers, fits 3" frames.
Non-marking yellow Poly rollers. LoadRite Part #6071.07

Stock# 1041279
4 Wheel roller truck replacement assembly. Replaces one side of the complete assembly. Non-marking yellow Poly rollers. LoadRite Part #6154.01

Stock# 1041004
Fits LoadRite 1-3/8" I.D. wobble rollers on 2003 & newer trailers.
LoadRite Part # 1002.51

Stock# 1041285
Replacement center bushing for old style Black Rubber LoadRite Wobble Rollers. 5/8" ID x 1-1/4" long. LoadRite Part # 1012.00

Stock# 1041204
Replacement center bushing for old style Black Rubber LoadRite Wobble Rollers. 1-1/8" ID x 1-1/4" long. LoadRite Part #1002.00

Stock# 1041010
LoadRite Hog Ring for old style (pre-2003) Black Rubber wobble roller assemblies. When compressed hog ring fits 1-1/8" O.D. roller arms.

Stock# 1041006
Fits LoadRite wobble roller assemblies 2003 & newer trailers. 2-1/4" O.D. LoadRite Part # 2509.02

Stock# 1041202
LoadRite 1-1/4" ID x 2-1/4" OD wobble roller washer for old style (pre-2003) Black Rubber wobble rollers.

Stock# 1041203
LoadRite 1-3/8" ID x 2-1/4" OD galvanized wobble roller washer fits 2003 & newer trailers. LoadRite Part #2505.906

Stock# 1041031
Includes: 2 washers- ( 5/8" I.D. x 1-1/2" O.D.) & 2 hog rings
LoadRite Part #1466.02

Stock# 1041133
Includes: 2 washers- (1-1/4" I.D. x 2-1/4" O.D.) & 2 hog rings
LoadRite Part #1466.03

Stock# 1041173
1.69" long bearing pad is required for mounting LoadRite Wobble Roller assemblies to flat frame surface.
LoadRite Part #2021.01

Stock# 1041025
2-7/8" long bearing pad is required for mounting LoadRite Wobble Roller assemblies to flat frame surface.
LoadRite Part #2021.02

Stock# 1041255
2" wide x 2" tall x 32" long hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on boat trailers.

Stock# 1041218
2" wide x 3" tall x 32" long hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on boat trailers.

Stock# 1041307
2" wide x 3" tall x 38.75" long hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on boat trailers.

Stock# 1041256
Aluminum pivot bar bracket measures 2.82" high and has 5/8" holes. For use with 2" wide pivot bars on LoadRite Wobble Roller assemblies. LoadRite Part #2072.06A

Stock# 1041257
Aluminum pivot bar bracket measures 3.82" high and has 5/8" holes. For use with 2" wide pivot bars on LoadRite Wobble Roller assemblies. LoadRite Part #2072.03A

Stock# 1041032
4-3/4" long x 1-3/4" wide pivot bar for 2 and 4 wheel LoadRite Wobble Roller assemblies.
LoadRite Part #2022.02A

Stock# 1041027
13-1/4" long aluminum wobble/track roller bar for LoadRite Dual-Roller wobble roller assemblies.
LoadRite Part #4030.01A

Stock# 1041034
3/8" x 1.31" Wide x 2-3/4" Long cadmium plated u-bolt for LoadRite Quad-Roller wobble roller assemblies

Stock# 1041012
3/8" x 1-1/2" Wide x 2-1/8" Long cadmium plated u-bolt for LoadRite Dual-Roller wobble roller assemblies.

Stock# 1041035
1/2" x 1.78" Wide x 4-1/2" Long cadmium plated u-bolt for LoadRite wobble roller Pivot Bar assemblies.

Stock# 1041305
8' x 2" x 4" pressure treated bunk board covered on all sides with deluxe marine carpet. (Sold as each)
Replace damaged or worn Loadrite bunks and renew trailer appearance with new marine grade carpeted bunk board.

Stock# 1041315
Loadrite finished edge silver plastic bunk cover. Fits 2" x 6" bunk boards and measures 12" in length.
Includes (1) - 2" x 6" x 12" finished edge section for 2" x 6" bunk boards.
SUPPLIES LIMITED

Stock# 1041316
Loadrite finished edge silver plastic bunk cover. Fits 2" x 6" bunk boards and measures 24" in length.
Includes 1- 2" x 6" x 24" finished edge section for 2" x 6" bunk boards.
SUPPLIES LIMITED

Stock# 1041288
11 gauge galvanized steel bunk mounting bracket bolts to bolster support brackets to attach bunks and set proper angle. 7/16" holes.

Stock# 1041303
Loadrite galvanized steel bunk mounting bracket bolts to bolster support brackets to attach bunks and set proper angle.
Measures 3-1/2" wide x 2" x 1"

Stock# 1041295
Loadrite 3/8" thick galvanized steel pontoon bunk bracket bolts to 2" x 2" frame and can be used with 2" x 4" or 2" x 6" bunk boards. Bracket has 3/8" mounting holes, a 11.44" span and a 3.5" width. Sold as each.

Stock# 1041250
Heavy-duty hot dip galvanized drop center trailer crossbar with .083" nominal wall thickness. Measures 3" wide x 2" high x 45" long (in a straight line at top)  LOADRITE Part #4007.616

Stock# 1041269
Heavy-duty hot dip galvanized drop center trailer crossbar with .083" nominal wall thickness. Measures 3" wide x 2" high x 50.25" long (in a straight line at top)  LOADRITE Part #4007.026

Stock# 1041270
Heavy-duty hot dip galvanized drop center trailer crossbar with .105" nominal wall thickness. Measures 3" wide x 2" high x 61.25" long (in a straight line at top)  LOADRITE Part #4007.016

Stock# 1041309
Heavy-duty hot dip galvanized drop center trailer crossbar with .083" nominal wall thickness. Measures 3" wide x 2" high x 52.375" long (in a straight line at top) LOADRITE Part #4007.006

Stock# 1041310
Heavy-duty hot dip galvanized drop center trailer crossbar with .120" nominal wall thickness. Commonly used on 102" wide boat trailers.  LOADRITE Part #4006.156

Stock# 1041271
Heavy-duty hot dip galvanized drop center trailer crossbar with .120" nominal wall thickness. Commonly used on boat trailers.  LOADRITE Part #4006.136

Stock# 1041211
Heavy-duty hot dip galvanized drop center trailer crossbar with 3/16" nominal wall thickness. Commonly used on boat trailers.  LOADRITE Part #4008.006

Stock# 1041296
Heavy-duty hot dip galvanized drop center flush mount trailer crossbar with 11 ga. wall thickness. Measures 3" wide x 3" high x 67" long (in a straight line at top) and is designed to bolt directly to the frame. LOADRITE Part #4304.306

Stock# 1041214
Heavy-duty hot dip galvanized trailer tongue with .072" nominal wall thickness. Tongues do not come with couplers or hardware.  LOADRITE Part #4089.706

Stock# 1041266
Heavy-duty hot dip galvanized trailer tongue with .095" nominal wall thickness. Tongues do not come with couplers or hardware.  LOADRITE Part #4090.516

Stock# 1041267
Heavy-duty hot dip galvanized trailer tongue with .095" nominal wall thickness. Tongues do not come with couplers or hardware.  LOADRITE Part #6276.056

Stock# 1041215
Heavy-duty hot dip galvanized trailer tongue with .120" nominal wall thickness. Tongues do not come with couplers or hardware.  LOADRITE Part #1805.036

Stock# 1041152
Heavy-duty hot dip galvanized trailer tongue with .120" nominal wall thickness. Tongues do not come with couplers or hardware.  LOADRITE Part #4017.016

Stock# 1041212
Hot dip galvanized 3"x3" crossbar mounting bracket for use on 3" tall trailer frame rail. Commonly used on boat trailers.  LOADRITE Part #4209.526

Stock# 1041213
Hot dip galvanized 3"x3" crossbar mounting bracket for use on 4" tall trailer frame rail. Commonly used on boat trailers.  LOADRITE Part #4209.516

Stock# 1041221
Hot dip galvanized tail light mounting bracket & rear step for use on 3" or 4" tall trailer frame rail. LOADRITE Part #6134.036

Stock# 1041222
Hot dip galvanized tail light mounting bracket & rear step for use on 3" or 4" tall trailer frame rail. LOADRITE Part #6134.046

Stock# 1041268
Aluminum tongue skid commonly used on smaller boat trailers.
LOADRITE Part #1161.00A

Stock# 1041231
2-hole aluminum slider strap. Holes are 2" on center. ( 1/4" x 3/4" x 2-3/4")

Stock# 1041207
1/2" x 2-1/16" Wide x 6-1/4 " Long cadmium plated u-bolt for attaching heavy duty springs to 2" x 2" or 2" x 3" axles.

Stock# 1041206
1/2" x 2-1/16" Wide x 7-1/4 " Long cadmium plated u-bolt for attaching heavy duty springs to 2" x 2" or 2" x 3" axles.

Stock# 1041023
1/2" x 3-1/16" Wide x 5-1/4 " Long cadmium plated u-bolt for mounting Winch Posts or other frame components on 3" wide channel.

Stock# 1041020
1/2" x 3-1/16" Wide x 6-1/4 " Long cadmium plated u-bolt for mounting Winch Posts or other frame components on 3" wide channel.

Stock# 1041021
1/2" x 3-1/16" Wide x 7-1/4 " Long cadmium plated u-bolt for mounting Winch Posts or other frame components on 3" wide channel.

Stock# 1041304
Leg Length (H) = 4.50", Leg Width (W)= 3.03", Thread (A)= 1/2". (Nuts and washers sold separately)

Stock #1041284
1/2" x 1-1/4" Grade 5 Zinc Plated Hex Bolt.   LOADRITE Part #2502.12

Stock #1041282
5/8" x 7-1/2" Grade 5 Zinc Plated Hex Bolt.   LOADRITE Part #2503.75

Stock #1041326
1/2"-13 x 3" zinc plated grade five bolt.   LOADRITE Part #2502.30

Stock #1041228
1/2" x 4" zinc plated grade five bolt.   LOADRITE Part #2502.40

Stock# 1041227
3/8" zinc plated u-bolt locknut for use with 3/8" stock u-bolts.

Stock# 1041022
1/2" zinc plated u-bolt locknut for use with 1/2" stock u-bolts.

Stock# 1041225
5/8" zinc plated u-bolt locknut for use with 5/8" stock u-bolts.

Stock# 1041259
3/8" cadmium plated u-bolt locknut for use with 3/8" stock u-bolts.

Stock# 1041260
3/8" galvanized flat washer for use with 3/8" stock u-bolts.

Stock# 1041226
1/2" I.D. x 1-1/4" O.D. stainless steel washer.  LOADRITE Part #2505.53S

Stock# 1041230
1/2" I.D. x 1-3/8" O.D. galvanized washer.  LOADRITE Part #2505.536

Stock #1041258
LOADRITE 3/8" x 4-5/8" J-Bolt.  LOADRITE Part #2506.00

Stock# 1041272
Black plastic winch stand cover keeps dirt and water out of post and covers unfinished sharp edges.

Stock# 1041170
Black plastic winch stand cover keeps dirt and water out of post and covers unfinished sharp edges.

Stock# 1041171
Black plastic winch stand cover keeps dirt and water out of post and covers unfinished sharp edges.