Includes: (2) Tie Down Engineering 9.6" GalvX coated Trailer Disc Brakes with Vented Rotor and Aluminum Caliper, Model 66 Disc Actuator with built in Electric Reverse Back-Flow Solenoid, 20' S.A. Flexible brake line kit and mounting hardware. Hub cavities/bearing are assembled and pre-packed with grease at the factory.
ELIMINATOR VENTED DISC BRAKES from Tie Down Engineering feature an Integral Rotor/Hub with GalvX Coating (One piece Hub). The Aluminum Caliper has an E-Coat finish that protects the caliper from salt crystallization. Stainless Steel caliper pins are easily accessible with 7/16" hex heads for quick removal. Stainless Steel brake pad backing plates further reduce areas susceptible to corrosion. All aluminum caliper, 380 series alloy, sheds heat five times faster than traditional cast iron calipers. Compact design allows short axle overhangs and provides direct brake line routing back to the axle. Oil impregnated bronze bushings last longer and slide smoother. Oversized rubber boot is 50% thicker by design and provides a more positive piston withdrawal.
ROTOR DIAMETER: 9.6"
REPLACES DRUM DIAMETER: 10"
BEARING SIZE: 1-3/8" x 1-1/16"
# OF STUDS: 5
BOLT CIRCLE: 4-1/2" (13", 14" and 15" Wheels)
AXLE RATING: 3500 lbs.
NOTE: TIEDOWN DISC BRAKES ARE NOT DESIGNED TO BE USED WITH ELECTRIC-OVER-HYDRAULIC BRAKE ACTUATORS THAT PRODUCE MORE THAN 1200 PSI
Brand: Tie Down Engineering
Stock # 5256187