VENTURE Boat Trailer Parts

Stock# 5421039
Length= 29", Height= 11-3/4" Width= 9-1/2, Mounting Holes= None
High impact white composite fender with back skirt fits Venture boat trailers with 13"  wheels.
Mounting hardware sold separately.

Stock# 5421038
Venture's Plastic Poly Bunk Cover will fit 3" wide lumber. Its shipped in two 6' sections and must be pieced together at the time of installation. The cover can easily be stapled onto your already carpeted bunks with galvanized or stainless steel staples. Ideal for painted, fiberglass, or aluminum boats. (Covers one 12' bunk)

Stock# 5421040
Frame Center = 78.00" Overall = 99.48" Hub Face to Hub Face: 92.13" 
Hot dipped galvanized square stock torsion axle with spindle nuts. 4-hole brake flange attached.

Stock# 5421018
Overall Length = 82" Hub Face = 76.50" Spring Centers = 62"
Brake Flange = 70" Axle weldment only, hubs & bearings sold separately.

Stock# 5421002
Includes: 1 hub, 25mm metric bearings, seal, dust cap, tang washer, flat washer & lug nuts. Pre-greased hub is ready to use right out of the package. Venture uses this metric bearing hub kit on VB-1000, 1300 and VW-1200 trailer models starting in 2007.

Stock# 5421003
Metric bearing kit (25mm) for Venture Trailer models VB-1000, 1300 and VW-1200 starting in 2007. Can also be used with other brand 25mm Metric trailer hubs. Kit contains components to repair one complete hub including both inner and outer bearings.

Stock# 5421005
Galvanized steel tail light mounting bracket & rear step for use on Venture 3" x 4" or 3" x 5" frame rails. Commonly used on boat trailers over 3,000 lbs. GVWR. (Left Side)

Stock# 5421006
Galvanized steel tail light mounting bracket & rear step for use on Venture 3" x 4" or 3" x 5" frame rails. Commonly used on boat trailers over 3,000 lbs. GVWR. (Right Side)

Stock# 5421007
2500 lb. capacity direct replacement Venture leaf spring. Measures 1-3/4" wide and 20" eye to eye.
Leaf springs sold as each.

Stock# 5421008
1830 lb. capacity direct replacement Venture leaf spring. Measures 1-3/4" wide and 20" eye to eye.
Leaf springs sold as each.

Stock# 5421009
3000 lb. capacity direct replacement Venture leaf spring. Measures 1-3/4" wide and 20" eye to eye.
Leaf springs sold as each.

Stock# 5421010
3380 lb. capacity direct replacement Venture leaf spring. Measures 1-3/4" wide and 20" eye to eye.
Leaf springs sold as each.

Stock# 5421012
Heavy-Duty 2" wide by 30' long high strength polyester webbing winch strap features a 10,000 lb. breaking strength and 4,000 lb. working load. Includes spring-loaded zinc plated snap hook.

Stock# 5421013
Heavy-Duty 3" wide by 30' long high strength polyester webbing winch strap features a 10,000 lb. breaking strength and 4,000 lb. working load. Includes spring-loaded zinc plated snap hook.

Stock# 5421017
Overall Length = 58" Hub Face = 53" Spring Center = 43"
Axle weldment with spindles, spindle nuts & cotter pins. Wheel hubs & bearings sold separately.

Stock# 5421019
Overall Length = 83" Hub Face = 79.125" Spring Centers = Drilled for 59" or 62" spring centers
Brake Flange = 72-1/2"  Axle weldment only, hubs & bearings sold separately.

Stock# 5421014
Overall Length = 97" Hub Face = 92.13" Spring Centers = Drilled for 72" or 75" spring centers
Brake Flange = 86"  Axle weldment only, hubs & bearings sold separately.

Stock# 5421015
Overall Length = 98" Hub Face = 92.13" Spring Centers = Drilled for 72" or 75" spring centers
Brake Flange = 83-1/2"  Axle weldment only, hubs & bearings sold separately.

Stock# 5421016
Overall Length = 98" Hub Face = 91.87" Spring Centers = Drilled for 72" or 75" spring centers
Brake Flange = 83-1/2"  Axle weldment only, hubs & bearings sold separately.

Stock# 5421021
Heavy-duty hot dip galvanized 4" drop center flush mount trailer crossbar. Measures 3" wide x 3" high x 59" long
(in a straight line at top) and is designed to bolt directly to the frame.

Stock# 5421022
Heavy-duty hot dip galvanized drop center flush mount trailer crossbar. Measures 3" wide x 3" high x 72" long
(in a straight line at top) and is designed to bolt directly to the frame.

Stock# 5421023
Heavy-duty hot dip galvanized drop center flush mount trailer crossbar with 9 ga. wall thickness. Measures 3" wide x 3" high x 72" long (in a straight line at top) and is designed to bolt directly to the frame.

Stock# 5421024
Heavy-duty hot dip galvanized drop center flush mount trailer crossbar. Measures 3" wide x 3" high x 72" long
(in a straight line at top) and is designed to bolt directly to the frame.

Stock# 5421025
Heavy-duty hot dip galvanized drop center flush mount trailer crossbar with 12 ga. wall thickness. Measures 3" wide x 3" high x 72" long (in a straight line at top) and is designed to bolt directly to the frame.

Stock# 5421011
Venture rust-free aluminum diamond tread tandem axle trailer tire fender for 14" or 15" tires.
Length=63", Height=15", Width=9".  Mounting hardware sold separately.

Stock# T5421028
Venture rust-free aluminum diamond tread triple axle trailer tire fender. Length=102", Height=18", Width=9", Thickness=.100. Mounting hardware sold separately.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# T5421027
Venture rust-free aluminum diamond tread triple axle trailer tire fender. Length=108", Height=18", Width=9", Thickness=.100. Mounting hardware sold separately.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# 5421020
Venture galvanized fender brace for use with tandem or triple aluminum trailer fenders. Measures 15-1/4" in length.
Mounting hardware sold separately.

Stock# 5421026
Venture trailer spring equalizer bars are used in multi-axle suspensions which accommodate Double Eye, C-Hook or Slipper style leaf springs. (1-3/4" spring width)   Dimensions A= 7-3/4" B=2-7/8"

Stock# 5421033
Molded plastic roller blocks used on Venture boat trailers. Sold in pairs. One left and one right.

Stock# 5421035
13-1/2" long aluminum wobble/track roller shaft for Venture Dual-Roller wobble roller assemblies.  Use two bars to make a Left Hand or Right Hand dual wobble roller assembly.

Stock# 5421036
2-Wheel left side mount, 15-1/2" to 18-1/2" centers, fits 2" frames. Non-marking yellow Poly rollers.
Includes bearing pad.

Stock# 5421037
2-Wheel right side mount, 15-1/2" to 18-1/2" centers, fits 2" frames. Non-marking yellow Poly rollers.
Includes bearing pad.

Stock# 5421032
2" wide x 3" tall x 36" long hot dip galvanized roller pivot bar mounts front-to-back over trailer crossbar. Used to support wobble roller assemblies on Venture boat trailers.

Stock# 5421029
Galvanized steel roller mounting pivot channel is used to attach roller assemblies and set proper angle. Bracket measures 3-1/4" wide x 32" long and accepts 2 dual venture roller assemblies. All mounting hardware and roller assemblies are sold separately.

Stock# 5421030
Galvanized steel roller mounting pivot channel is used to attach roller assemblies and set proper angle. Bracket measures 3-1/4" wide x 32" long and accepts 3 dual venture roller assemblies. All mounting hardware and roller assemblies are sold separately.

Stock# 5421031
Galvanized steel roller mounting pivot channel is used to attach roller assemblies and set proper angle. Bracket measures 3-1/4" wide x 32" long and accepts 4 dual venture roller assemblies. All mounting hardware and roller assemblies are sold separately.

Stock# 5421034
Stainless steel roller block strap is commonly used on Venture roller trailers. Measures 3"

Stock# 5421001
Replacement molded PVC wobble roller bushing used on Venture boat trailers. Length: 2.625"