Stock# 1041288 LOADRITE 11-gauge galvanized steel bunk mounting bracket bolts to bolster support brackets to attach bunks and set proper angle. 7/16" holes.
Stock# 5291146 EZ-LOADER heavy-duty zinc plated steel bunk mounting bracket bolts to bolster support brackets to attach bunks and set proper angle. Bracket is 3/16" thick x 3" wide.
Stock# 5291170 EZ-LOADER mounting bracket for bunks boards and Double or Single roller arm assemblies. This mounting bracket will allow the bunk/roller arm to pivot as needed. Holes = 3/8"
Stock# 5451009 Jammy Heavy Duty 4-5/8" wide by 3-1/8" tall by 1/4" thick aluminum swivel top bunk bracket is designed to mount your bunks to the cross member bunk brackets. Sold as each. Mounting hardware not included.
Stock# 5442059 CONTINENTAL heavy-duty 3-1/2" wide by 1-3/4" tall aluminum swivel top bunk bracket is designed to mount your bunks to the cross member bunk brackets. Sold as each. Mounting hardware not included.
Stock# 5428160 MAGIC TILT 5-1/2" x 3" tall galvanized 90° bracket allows for pivoting of bunk boards or roller assemblies. Bottom mounting holes are on 3.5" centers. Sold as 'each', mounting hardware not included.
Stock# 1041303 Loadrite galvanized steel bunk mounting bracket bolts to bolster support brackets to attach bunks and set proper angle. Measures 3-1/2" wide x 2" x 1"
Stock# 5454042 SEALION hot dip galvanized pivot bar bracket measures 2" H x 5" W and is pre-drilled for easy mounting. The bottom mounting holes are 3-9/16" on center. Mounting hardware not included.
Stock# 5256359 Galvanized steel bracket designed to mount bunks to a PWC trailer. The bracket is 1/4" thick and features 3 adjustable positions. 1 pair. Mounting hardware sold separately.
Stock# 5428116 MAGIC TILT galvanized Bunk Bracket Assembly clamps on to 3" x 3" trailer frames and the bunk bracket measures 12" high. Sold as each. Hardware included.
Stock# 5256189 Designed to support Tie-Down Engineering's boat trailer roller bunks, or 2x4 / 2x6 Wood Bunks. Includes (2) 8" bolster brackets and (2) top angle brackets with 1/2" x 1" bolts and 1/2" nyloc nuts.
Stock# 5256330 Designed to support Tie-Down Engineering's boat trailer roller bunks, or 2x4 / 2x6 Wood Bunks. Includes (2) 10" bolster brackets and (2) top angle brackets with 1/2" x 1" bolts and 1/2" nyloc nuts.
Stock# 5256331 Designed to support Tie-Down Engineering's boat trailer roller bunks, or 2x4 / 2x6 Wood Bunks. Includes (2) 12" bolster brackets and (2) top angle brackets with 1/2" x 1" bolts and 1/2" nyloc nuts.
Stock# 5428012 MAGIC TILT galvanized 12" bunk bracket kit includes a permalock bracket that allows for more secure mounting. Kit mounts to a 3" tall cross member.
Stock# 5212157 Designed to support bolster or bunk boards. 2-11/16" long double slots for adjustment. 1/8" Aluminum bolster brackets are slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Stock# 5256051 Designed to support boat trailer bunk boards. 2-11/16" long double slots for adjustment. Attach to cross-member with hex bolts or u-bolts.
Stock# 1041430 LOADRITE support bolster bracket for bunk boards. 2-11/16" long double slots for adjustment. 11ga. Galvanized bolster brackets are slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Stock# 5256052 Designed to support boat trailer bunk boards. 2-11/16" long double slots for adjustment. Attach to cross-member with hex bolts or u-bolts.
Stock# 1041436 LOADRITE support bolster bracket for bunk boards and features long double slots for adjustment. 11ga. Galvanized bolster brackets are slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Stock# 5256053 Designed to support boat trailer bunk boards. 2-11/16" long double slots for adjustment. Attach to cross-member with hex bolts or u-bolts.
Stock# 1041437 LOADRITE support bolster bracket for bunk boards and features long double slots for adjustment. 11ga. Galvanized bolster brackets are slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.
Stock# 5257019 Designed to support boat trailer bunk boards. 2-11/16" long double slots for adjustment. Attach to cross-member with hex bolts or u-bolts.
Stock# 5257020 Designed to support boat trailer bunk boards. 2-11/16" long double slots for adjustment. Attach to cross-member with hex bolts or u-bolts.
Stock# 5257022 Galvanized bunk brackets are angled at top to provide extra support when aligned with top swivel bracket. 3" long double slots for vertical adjustment will accept 7/16" or 1/2" diameter bolts. Heavy duty 9 gauge steel bracket is 10" tall by 3-3/4" wide. Use Top Angle Brackets to mount bunk boards.
Stock# 5451007 Designed to support bolster or bunk boards. These bunk brackets are angled at top to provide extra support when aligned with top swivel bracket. 3" long double slots for vertical adjustment will accept 7/16" or 1/2" diameter bolts. Use Top Angle Brackets to mount bunk boards.
Stock# 5212183 Designed to support bolster or bunk boards. These bunk brackets are angled at top to provide extra support when aligned with top swivel bracket. 3" long double slots for vertical adjustment will accept 7/16" or 1/2" diameter bolts. Use Top Angle Brackets to mount bunk boards.
Stock# 5212184 Designed to support bolster or bunk boards. These bunk brackets are angled at top to provide extra support when aligned with top swivel bracket. 3" long double slots for vertical adjustment will accept 7/16" or 1/2" diameter bolts. Use Top Angle Brackets to mount bunk boards.
Stock# 5212185 Designed to support bolster or bunk boards. These bunk brackets are angled at top to provide extra support when aligned with top swivel bracket. 3" long double slots for vertical adjustment will accept 7/16" or 1/2" diameter bolts. Use Top Angle Brackets to mount bunk boards.
Stock# 5257103 Galvanized bracket is made form heavy duty 11 ga. steel and is designed to mount 2" bunks on their edge. Bracket length = 7-1/2", Adjustment slots = 2-1/2" and 2"
Stock# 5419193 KARAVAN Heavy Duty 4-1/2" wide x 6-1/4" tall x 1/4" thick galvanized steel bracket allows for adjustable height bunk mounting. Bottom mounting holes are on 3-1/2" centers at 1/2" in diameter. Sold as 'each', mounting hardware not included.
Stock# 5419192 KARAVAN heavy-duty 4-1/2" wide x 8" tall x 1/4" thick galvanized steel bracket allows for adjustable height bunk mounting. Bottom mounting holes are on 3-1/2" centers at 1/2" in diameter. Sold as 'each', mounting hardware not included.
Stock# 5442058 CONTINENTAL heavy-duty 4-7/8" wide by 10" tall, 5/16" thick aluminum bunk brackets are designed to mount on 3" wide cross members. Holds 2" to 4" wide bunks to support boat hulls. Sold as each. Mounting hardware not included.
Stock# 5257040 85° angled bunk bracket measures 5" wide by 6.62" tall. Galvanized bracket allows for adjustable height bunk mounting. Designed to be used with 95° bracket in pairs.
Stock# 5257041 95° angled bunk bracket measures 5" wide by 6.81" tall. Galvanized bracket allows for adjustable height bunk mounting. Designed to be used with 85° bracket in pairs.
Stock# 5428161 MAGIC TILT heavy-duty 5" wide by 5-3/4" tall galvanized bunk bracket has 1/2" holes and is designed to mount on 3" wide cross members. Commonly used with cypress bunks. Sold as each. Mounting hardware not included.
Stock# 5212160 Heavy Duty 5" wide by 10" tall 1/4" aluminum bracket allows for adjustable height bunk mounting. Bottom mounting holes are on 3-9/16" centers & 1/2" in diameter. Sold as 'each', mounting hardware not included.
Stock# 5212159 CE SMITH heavy-duty 5" wide by 8" tall 1/4" aluminum bracket allows for adjustable height bunk mounting. Bottom mounting holes are on 3-9/16" centers & 1/2" in diameter. Sold as 'each', mounting hardware not included.
Stock# 5212078 CE SMITH heavy-duty 5" wide by 6" tall 1/4" galvanized steel bracket allows for adjustable height bunk mounting. Bottom mounting holes are on 3-1/2" centers & 1/2" in diameter. Sold as 'each', mounting hardware not included.
Stock# 1041442 LOADRITE hot dip galvanized pivot bar measures 9.5" H x 5" W and is pre-drilled for easy mounting. The bottom mounting holes are 3.5" on center. Mounting hardware not included.
Stock# 5442056 CONTINENTAL heavy-duty 5" wide by 6-1/4" tall aluminum bunk brackets are designed to mount on 3" wide cross members. Holds 2" to 4" wide bunks to support boat hulls. Sold as each. Mounting hardware not included.
Stock# 5428162 MAGIC TILT heavy-duty 5" wide by 7-1/4" tall galvanized bunk bracket is designed to mount on 3" wide cross members. Commonly used with cypress bunks. Sold as each. Mounting hardware not included.
Stock# 5212079 CE SMITH heavy-duty 5" wide by 8" tall 1/4" galvanized steel bracket allows for adjustable height bunk mounting. Bottom mounting holes are on 3-1/2" centers & 1/2" in diameter. Sold as 'each', mounting hardware not included.
Stock# 5442057 CONTINENTAL heavy-duty 5" wide by 8" tall aluminum bunk brackets are designed to mount on 3" wide cross members. Holds 2" to 4" wide bunks to support boat hulls. Sold as each. Mounting hardware not included.
Stock# 5428163 MAGIC TILT heavy-duty 5" wide by 10" tall galvanized bunk bracket is designed to mount on 3" wide cross members. Commonly used with cypress bunks. Sold as each. Mounting hardware not included.
Stock# 5212080 CE SMITH Heavy Duty 5" wide by 10" tall 1/4" galvanized steel bracket allows for adjustable height bunk mounting. Bottom mounting holes are on 3-1/2" centers & 1/2" in diameter. Sold as 'each', mounting hardware not included.
Stock# 5257042 5.125" wide by 4.75" tall galvanized bracket allows for pivoting of bunk boards or roller assemblies. Upper or lower holes can be fitted with a bolt to act as a pivot stop.
Stock# 1041349 LOADRITE 5.07" x 4.81" tall galvanized 90° bracket allows for pivoting of bunk boards or roller assemblies. Bottom mounting holes are on 3-3/8" centers for a 3" crossbar.
Stock# 5419195 KARAVAN heavy-duty 5" wide x 8-1/4" tall x 1/4" thick galvanized steel bracket allows for adjustable height bunk mounting. Bottom mounting holes are on 3-1/2" centers at 1/2" in diameter. Sold as 'each', mounting hardware not included.
Stock# 1041376 LOADRITE hot dip galvanized pivot bar measures 7.75" H x 4.81" W and is pre drilled for easy mounting. The bottom mounting holes are 3.5" on center. Mounting hardware not included.
Stock# 5291149 EZ-LOADER heavy-duty galvanized hat style bunk mount bracket attaches the bunk to upright bunk brackets on 3x3 cross members on trailers not exceeding 4,700 lbs capacity.
Stock# 5291202 EZ-LOADER galvanized bunk mounting bracket mounts the bunks on EZ-Loader pontoon trailers from 1999-present. Bracket has 3/8" mounting holes, a 12-1/4" span and a 4" width. Sold as each.
Stock# 5442050 CONTINENTAL galvanized pontoon bunk bracket is designed to be used in pairs to support various lengths of bunk boards. Measures 15-1/2" Long x 3" Base x 6" High x 2" Wide.
Stock# 5419100 The Karavan pontoon bunk bracket is made from 11 ga. galvanized steel. The bracket is designed to be used in pairs to support various lengths bunk boards. The 1/2" x 7" adjustable slot allows for left/right adjustment when attaching to trailer frame.
Stock# 5212193 CE SMITH V-wing bracket is designed with a 7" lateral adjustment slot for perfect pontoon to trailer alignment. Pontoon bolster brackets support bunk boards in a shallow V cradle configuration that best suits pontoon hulls. Features 1/8" thick steel that is hot dip galvanized for durability.
Stock# 5257024 Customize the look of your pontoon trailer with this versatile pontoon bunk bracket. Made from 11 ga. steel. Supports a pair of 2x6 bunk boards. 4-11/16" tall
Stock# 5257025 Customize the look of your pontoon trailer with this versatile pontoon bunk bracket. Made from 11 ga. steel. Supports a pair of 2x6 bunk boards. The bracket is 6-3/16" tall and 15-1/2" overall.
Stock# 5212192 CE SMITH V-wing bracket is designed with a 7" lateral adjustment slot for perfect pontoon to trailer alignment. Pontoon bolster brackets support bunk boards in a shallow V cradle configuration that best suits pontoon hulls. Features 1/8" thick steel that is hot dip galvanized for durability.
Stock# 1041378 LOADRITE pontoon trailer bunk board bracket will help customize the look of your pontoon trailer. Made from 1/8" galvanized steel, bracket is designed to be used in pairs to support various lengths of 2x6 bunk boards.
Stock# 1041379 LOADRITE pontoon trailer bunk board bracket will help customize the look of your pontoon trailer. Made from 1/8" galvanized steel, bracket is designed to be used in pairs to support various lengths of 2x4 bunk boards.
Stock# 5419186 KARAVAN pontoon bunk bracket is made from 7 ga. steel with a black textured finish and is 4.60" tall. The bracket is designed to be used in pairs to support various lengths bunk boards. The 1/2" x 7" adjustable slot allows for left/right adjustment when attaching to the trailer frame.
Stock# 5419187 KARAVAN pontoon bunk bracket is made from 7 ga. galvanized steel and is 4.60" tall. The bracket is designed to be used in pairs to support various lengths bunk boards. The 1/2" x 7" adjustable slot allows for left/right adjustment when attaching to the trailer frame.
Stock# 5419197 KARAVAN pontoon bunk bracket is made from 7 ga. steel with a black textured finish and is 6.35" tall. The bracket is designed to be used in pairs to support various lengths bunk boards. The 1/2" x 7" adjustable slot allows for left/right adjustment when attaching to the trailer frame.
Stock# 5419191 KARAVAN tri-pontoon bunk bracket is made from 7 ga. black painted steel. The bracket is designed to be used in pairs to support various lengths bunk boards. The 6 mounting holes on the bottom allow for some adjustment when attaching to the trailer frame.
Stock# 5419190 The Karavan tri-pontoon bunk bracket is made from 7 ga. galvanized steel. The bracket is designed to be used in pairs to support various lengths bunk boards. The 6 mounting holes on the bottom allow for some adjustment when attaching to the trailer frame.
Stock# 1041295 LOADRITE 3/8" thick galvanized steel pontoon bunk bracket bolts to 2" x 2" frame and can be used with 2" x 4" or 2" x 6" bunk boards. Bracket is 3/8" thick, has 3/8" mounting holes on 2-1/2" centers, a 11.44" span and a 3.5" width. Sold as each.
Stock# 5428110 MAGIC TILT galvanized pontoon bunk bracket is designed to support various lengths of bunk boards. Measures 14" Long x 3" wide and has 2-1/8" between mounting bracket.
Stock# 7109026 HOOSIER Pontoon Boat Trailer bunk bracket kit comes equipped with the u-bolt and lock nuts. Made from 5/16 painted steel, bracket is designed to be used with 2x4's in varying lengths. The u-bolt has an inside width of 2-1/8" and length of 2".
Stock# 5430058 ROAD KING galvanized 1-1/2" square post measures 6" long and has pre-drilled holes. Commonly used with the Road King bolt on bunk bracket #15TBOBP. Hardware not included.
Stock# 5430059 ROAD KING galvanized 1-1/2" square frame tube measures 8" long and has pre-drilled holes. Commonly used with the Road King bolt on bunk bracket #15TBOBP. Hardware not included.
Stock# 5430060 ROAD KING galvanized 1-1/2" square post measures 10" long and has pre-drilled holes. Commonly used with the Road King bolt on bunk bracket #15TBOBP. Hardware not included.
Stock# 5430061 ROAD KING galvanized 1-1/2" square post measures 12" long and has pre-drilled holes. Commonly used with the Road King bolt on bunk bracket #15TBOBP. Hardware not included.
Stock# 5430057 ROAD KING bolt-on channel bracket allows you to attach a 1-1/2" square post vertically or horizontally to your trailer frame. Measures 5" x 5" and is made with 7-gauge galvanized steel. Hardware is included.
Stock# 5451003 Heavy Duty 5" tall by 6" wide 1/4" aluminum bracket allows for adjustable height bunk mounting. Sold as 'each', mounting hardware not included.
Stock# 5212161 Heavy Duty 5" tall by 6" wide 1/4" aluminum bracket allows for adjustable height bunk mounting. Sold as 'each', mounting hardware not included. SUPPLIES LIMITED
Stock# 5257027 Made from 8 ga. steel, these galvanized bunk stiffening bars add hull support where it is needed most. Mount using a 86136 pivot weldment and appropriate height bolster bracket (not included).
Stock# 5257026 Made from 8 ga. steel, these galvanized bunk stiffening bars add hull support where it is needed most. Mount using a 86136 pivot weldment and appropriate height bolster bracket (not included).
Stock# 5419076 Made from heavy duty galvanized steel, these bunk stiffening bars add hull support where it is needed most. Bolster bracket and mounting hardware sold separately.
Stock# 5291123 EZ-LOADER Galvanized steel bunk/roller mounting tray bolts to support brackets to attach bunk or roller assemblies and set proper angle. Bracket measures 4" wide x 30" long.
Stock# 5291145 EZ-LOADER heavy-duty galvanized strap bunk mounting bracket bolts to the cross member on EZ-Loader personal water craft trailers. Measures 3/16" x 3" x 9". Strap tie plate required for installation sold separately.
Stock# 5291148 EZ-LOADER heavy-duty galvanized strap bunk mounting bracket tie plate secures the strap bunk mounting bracket to the crossmember on EZ-Loader water vehicle trailers. 3/8" x 5.44" hole centers.