E-Z Off slides are designed to eliminate the friction caused between carbide runners on the skis and the trailer deck. Between the weight of the snowmobile and the sharp carbides, loading and unloading a snowmobile can be a big chore. E-Z Off slides make loading and unloading almost effortless. Not only will E-Z Off slides make ending a long day of snowmobiling less tedious, but also will save your trailer deck from imminent destruction by the carbides.
Stock# 1658001 E-Z OFF low profile wide slides are 10' x 8" x 3/8" (1-pair) and are made out of extruded polyethylene. Single piece construction and comes with 24 stainless steel 3/4" screws.
Stock# 1658002 E-Z OFF low profile wide trailer slides measure 11' x 8" x 3/8" (1-pair) and are made out of extruded polyethylene. Single piece construction and comes with 24 stainless steel 3/4" screws.
Stock# 1658003 E-Z OFF low profile wide slides measure 12' x 8" x 3/8" each and are made out of extruded polyethylene. Single piece construction and comes with 26 stainless steel 3/4" screws. Includes 1-pair.
Stock# 1658005 E-Z OFF trailer interior Split Traction Mats are 2 pieces 6' x 8" and are made of rubber from recycled tires. Comes with 20 stainless steel 3/4" screws.
Stock# 1658006 E-Z OFF Exit Guide is a 1/2" thick L - shaped board (3.5" X 3.5" X 5 ft) used to guide a snowmobile across and out the front of a V-nosed enclosed trailer. Comes with 6 stainless steel 1-1/4" screws.
Stock# 1658007 E-Z OFF Boat Slides are designed to make loading and unloading a boat from a trailer easier. They measure 23-3/4" x 2-1/2" and are made of friction-free polyethylene (recycled milk bottles), are sold as each, and come with 2 stainless steel 1-1/4" screws.