Trailer Parts Superstore® offers a wide selection of Chocks and Floor Mounted Tie Down equipment commonly used in Cargo Trailers & Race Car / Motorcycle Trailers. Products include: Low profile aluminum floor tracks, Spring loaded track tie-downs, Chrome & Stainless Steel Wheel Chocks for Motorcycles, Wheel chock mounting hardware for wood or metal floors and rubber wheel chocks.
Stock# 7155055 FREE GROUND SHIPPING TO LOWER-48 U.S. TPS wheel chocks keep your trailer in place so you can re-hitch with confidence. Solidly constructed of durable hard plastic with UV inhibitors.
Stock# 7003172 CURT rope hook features a chrome-plated finish and offers a capacity of 1,200 lbs. It can be mounted on various surfaces and includes all necessary hardware for a complete installation.
Stock # 1567026 Tubular construction makes this chrome wheel chock the strongest around. Keyhole slots make it easy to remove and store. Tapered design stabilizes up to 6.5" tires.
Stock # 1567027 Tubular construction makes this 6-1/2" I.D. chrome wheel chock the strongest around. Keyhole slots make it easy to remove and store. Includes mounting hardware for wood and metal floors.
Stock# 1594049 RACK'EM RC-WTD Magnum Tire Trapper Wheel Tie Down kit is designed to secure anything with wheels to the floor of a trailer. The two chocks can be mounted directly to the trailer floor of an open or enclosed trailer.
Stock# 1609136 CAMCO wheel chocks keep your trailer in place so you can re-hitch with confidence. Solidly constructed of durable hard plastic with UV inhibitors.
Stock# 1609137 Wheel chocks keep your trailer in place so you can re-hitch with confidence. Solidly constructed of durable hard plastic with UV inhibitors and rope for convenient placement and removal. Sold as each.
Stock# 1326230 Extruded aluminum wheel chock for use in chocking semi-trailers and trucks. Great for ice and snow conditions. 28,000 lbs. capacity 6" wide x 8.75" long x 5.86" high
Stock# 1326434 BUYERS PRODUCTS heavy-duty serrated wheel chock has an galvanized finish and is ideal for use in ice and snow. Also has an integral grip for easy handling. Measures: 10" wide x 9" long x 6" high. SUPPLIES LIMITED
Stock# 1326270 100% composite plastic wheel chocks are connected with a 32-3/4" long rope and are resistant to oils and chemicals. Dimensions: 6" wide x 9-1/2" long x 4" high
Stock# 1326389 Extruded rubber wheel chocks are connected with a 3' long nylon rope and have high visibility reflective tape on three sides. Dimensions: 4" wide x 8" long x 4" high
Stock# 1609788 CAMCO tandem axle trailer wheel chock is designed to secure your tandem-axle trailer against both forward and backward motion. Wheel Chock can also be used as a tongue jack stand with a 400 lb. max tongue weight.
Stock# 1326526 BUYERS PRODUCTS Aluminum Strap Eye has an inside opening of 2.09" and an inside height of 1.75". It is a perfect lashing point for chain or tie down straps and can be easily installed.
Stock# 1326525 Heavy-Duty Recessed Rotating Rope Ring rotates a full 360° and is designed to be bolted to a floor or welded to steel. Not designed for lifting. Ultimate breaking strength: 6,000 lbs. Safe working load: 2,000 lbs.
Stock# 7102071 TRITON Quickslide Tie Down Kit comes with two quickslide I bolts to be used as tie down points. Tie down eyes come with quickslide keeper, a wing nut for tightening, a washer and a square reinforcement piece to add strength.
Stock# 7102072 TRITON Quickslide Plate Tie Down Kit comes with two tie down plates with quickslide mounting hardware. Large hook hole is 9/16" x 1-13/16" and small hook hole has a diameter of 9/16".
Stock# 7102070 TRITON Tie Down Flush mount kit includes a pair of 4" diameter round floor mount D-rings and mounting hardware. Load limit is rated at 1,000 lbs.
Stock# 7102076 TRITON ATV Aluminum Tide down kit is designed to mount in the bottom corner of some Triton ATV trailers. There will be a recesses groove that run in the inside corner of the floor and wall edge. This kit includes (2) tie down brackets and all of the hardware to install the brackets.
Stock# 7102073 TRITON D-Ring Tie Down Kit comes with 4 of the D-Ring and D-ring brackets. The kit also includes all of the necessary hardware to mount brackets to a Triton AUT series trailer with mounting channels in the floor or side rail. D-Ring Dimensions: ID=1" x 1-1/4" OD= 1-7/16" x 1-9/16"
Stock# 7102125 TRITON add a nut kit is perfect for adding an area onto the trailer floor for mounting a 1/2" bolt. The kit comes with aluminum nut insert, aluminum channel, snap ring, and mounting hardware. SUPPLIES LIMITED - 2 left in stock
Stock# 7107168 Big Tex Surface Mount Aluminum Strap Eye has an inside opening of 2" and an inside height of 1.75". It is a perfect lashing point for chain or tie down straps and can be easily installed.
Stock# 7107169 Big Tex Surface Weld-On Metal Tie Loop has an inside opening of 2" and an inside height of 2". It is a perfect lashing point for chain or tie down straps and can be easily installed by welding to any metal surface.
Stock# 7107170 BIG TEX Surface Weld-On Metal Tie Loop is 4.375" long and has an inside opening of .875". It is a perfect lashing point for safety chains or tie down straps and can be easily installed by welding to any metal surface.
Stock# 7107171 Big Tex Surface Weld-On Metal Tie Loop is 6" long and has an inside opening of .875". It is a perfect lashing point for safety chains or tie down straps and can be easily installed by welding to any metal surface.
Stock# 7107172 Big Tex Surface Weld-On Metal Tie Loop is 6.75" long and has an inside opening of .875". It is a perfect lashing point for safety chains or tie down straps and can be easily installed by welding to any metal surface.
Stock# 7107173 Big Tex Surface Weld-On Square Metal Tie Loop is 2-15/16" long and has an inside opening of 2-1/4". It is a perfect lashing point for safety chains or tie down straps and can be easily installed by welding to any metal surface.
Stock# 7107174 Big Tex Surface Weld-On Zig-Zag Metal Tie Loop is 13-1/2" long and has 4 peaks to be used as tie down points. It is a perfect lashing loop for trailers that require multiple closely mounted tie down points such as motorcycle trailers.
Stock# 7107175 Big Tex Surface Weld-On Metal Tie Loop has an inside opening of 2" and an inside height of 3". It is a perfect lashing point for chain or tie down straps and can be easily installed by welding to any metal surface.