Trailer Parts Superstore® offers a wide selection of galvanized trailer crossmembers and frame mounting brackets from the industries leading manufacturers. Use dimensional measurements or the manufacturers part number to determine which one will work for your application.
Stock# 5212182 Designed to support bolster or bunk boards. These bunk brackets are angled at top to provide extra support when aligned with top swivel bracket. 3" long double slots for vertical adjustment will accept 7/16" or 1/2" diameter bolts. Use Top Angle Brackets to mount bunk boards. SUPPLIES LIMITED
Stock# 5454042 SEALION hot dip galvanized pivot bar bracket measures 2" H x 5" W and is pre-drilled for easy mounting. The bottom mounting holes are 3-9/16" on center. Mounting hardware not included.
Stock# 1041442 LOADRITE hot dip galvanized pivot bar measures 9.5" H x 5" W and is pre-drilled for easy mounting. The bottom mounting holes are 3.5" on center. Mounting hardware not included.
Stock# 1041376 LOADRITE hot dip galvanized pivot bar measures 7.75" H x 4.81" W and is pre-drilled for easy mounting. The bottom mounting holes are 3.5" on center. Mounting hardware not included.
Stock# 1041370 LOADRITE galvanized bolt-on tongue skid commonly used on many boat trailers. Center of mounting hole to center of mounting hole measures 7-1/8" and the drop is 4".
Stock# 5454072 SeaLion / TideWater hot dip galvanized 3"x4" crossbar mounting bracket for use on 4" tall trailer frame rail. Commonly used on boat trailers.
Stock# 5454071 SeaLion / TideWater hot dip galvanized 3"x3" crossbar mounting bracket for use on 3" tall trailer frame rail. Commonly used on boat trailers.
Stock# 5291116 EZ-LOADER two position hot dip galvanized 3"x3" crossbar mounting bracket for use on 4" tall trailer frame rail. Commonly used on many boat trailers.
Stock# 5291115 EZ-LOADER three position hot dip galvanized 3"x3" crossbar mounting bracket for use on 5" tall trailer frame rail. Commonly used on many boat trailers.
Stock# 5421080 VENTURE galvanized crossmember bracket measures 3-1/8" wide by 6" high and is used on Venture trailers built in early 2000's that have 3" x 3" frames.
Stock# 5212025 CE SMITH Hot-dipped galvanized pre-punched bolt-on light mounting bracket. Bracket extends 4-1/2" from the mounting surface and is pre-punched for light studs, wiring and frame attachment.
Stock# 5257043 Hot-dipped galvanized left hand tail light mounting bracket with step pad / light protector. Holds standard 2" diameter studded tail lights.
Stock# 5257044 Hot-dipped galvanized right hand tail light mounting bracket with step pad / light protector. Holds standard 2" diameter studded tail lights.
Stock# 5421006 Galvanized steel tail light mounting bracket & rear step for use on Venture 3" x 4" or 3" x 5" frame rails. Commonly used on boat trailers over 3,000 lbs. GVWR. (Right Side)
Stock# 5421005 VENTURE galvanized steel tail light mounting bracket & rear step for use on Venture 3" x 4" or 3" x 5" frame rails. Commonly used on boat trailers over 3,000 lbs. GVWR. (Left Side)
Stock# 5454112 Hot dip galvanized 5" right hand tail light mounting bracket for use on SeaLion / TideWater with 3" x 3" trailer frame rails. Constructed from heavy-duty 11 gauge steel. SUPPLIES LIMITED
Stock# 5454078 Hot dip galvanized tail light mounting bracket for use on SeaLion / TideWater with 3" x 3" trailer frame rails. Constructed from heavy-duty 11 gauge steel. SUPPLIES LIMITED
Stock# 5454077 Hot dip galvanized tail light mounting bracket for use on SeaLion / TideWater with 2" x 3" trailer frame rails. Constructed from heavy-duty 11 gauge steel.
Stock# 5422289 SHORELAND'R zinc plated pre-punched bolt-on frame tie down bracket. Bracket measures 3" x 2" with a 3/8" mounting hole and a 1" hook hole.