Stock# 5229017 Attwood 4" inline bilge blower comes with 16-gauge tinned copper wire. Wire is caulked to prevent water from wicking through insulation jacket. All materials and components are state-of-the-art. Blower is designed to add ventilation to your bilges, engine compartments, galleys, and heads. SUPPLIES LIMITED - 3 left in stock
Stock# 5026094 3" x 10' white vinyl bilge blower hose. Shields Marine Vinylvent ducting hose is PVC supported by anodized wire helix and is UV / ozone resistant. This flexible hose is primarily used for the venting of bilge fumes.
Stock# 5026095 4" x 10' white vinyl bilge blower hose. Shields Marine Vinylvent ducting hose is PVC supported by anodized wire helix and is UV / ozone resistant. This flexible hose is primarily used for the venting of bilge fumes.
Stock# 1492299 Seasense hose ventilator housing is designed to allow for use of multiple style ventilation cowls or louvered covers. Accepts a 2-1/2" ventilation hose. SUPPLIES LIMITED - 3 left in stock
Stock# 5181343 WHITECAP boat engine / bilge compartment louver vent cap is made from durable black nylon material. Predrilled to accommodate screws, bilge vent will not rust, discolor or streak. Overall Size: Length 17-1/4" x Width 2-1/2" Cut Out Size: Length 16-3/16" x Width 2-5/16"
Stock# 5181341 WHITECAP boat engine / bilge compartment louver vent cap is made from durable black nylon material. Predrilled to accommodate screws, bilge vent will not rust, discolor or streak. Overall Size: Length 17-1/4" x Width 2-1/2" Cut Out Size: Length 15-7/8" x Width 2"
Stock# 5181342 WHITECAP boat engine / bilge compartment louver vent cap is made from durable white nylon material. Predrilled to accommodate screws and the bilge vent will not rust, discolor or streak. Overall Size: Length 17-1/4" x Width 2-1/2" Cut Out Size: Length 16-3/16" x Width 2-5/16"
Stock# 5181340 WHITECAP boat engine / bilge compartment louver vent cap is made from durable white nylon material. Predrilled to accommodate screws, bilge vent will not rust, discolor or streak. Overall Size: Length 17-1/4" x Width 2-1/2" Cut Out Size: Length 15-7/8" x Width 2"
Stock# 5181381 Below deck gas tank vent fitting with screened opening accepts 5/8" I.D. marine fuel vent hose. Stainless Steel construction with round head and straight through hose fitting. Requires 3/4" diameter hole for mounting.
Stock# 5181382 WHITECAP below deck gas tank vent fitting with screened opening accepts 5/8" I.D. marine fuel vent hose. Stainless Steel construction with round head and 90° through hose fitting. Requires 3/4" diameter hole for mounting.