DEXTER Hubs, Bearings & Seals

Stock# 5331156DA
8 Studs on 6-1/2" Bolt Circle Trailer Brake Hub designed for 10k Drums. 5/8" studded hub includes 5/8" x 18 pressed studs and Inner and outer bearing cups.

Stock# 5331158DA
8 Studs on 6-1/2" Bolt Circle Trailer Brake Hub designed for 12k Drums. 5/8" studded hub includes 5/8" x 18 pressed studs and Inner and outer bearing cups.

Stock# 5331160DA
8 Studs on 275 mm Bolt Circle Trailer Brake Hub designed for 15k Drums. Hub includes extra long pressed studs and Inner and outer bearing cups.

Stock# 5331199
Includes: 1 hub, bearings, grease seal, dust cap and 1/2" x 20 lug bolts. Cast Iron hub is rated for 2K capacity axles.

Stock# 5331200
Includes: One cast iron hub rated for 2K axles, two 1/16" bearings, one grease seal, one dust cap and four lug nuts.

Stock# 5331202
Includes: One cast iron hub rated for 2K axles, two 1-1/16 bearings, grease seal, dust cap and lug nuts.
For use with 8" to 12" wheels only.

Stock# 5331201
Includes: One cast iron hub rated for 2K axles, two 1-1/16 bearings, grease seal, dust cap and lug nuts.
For use with 13" to 15" wheels only.

Stock# 5331203
Includes: One cast iron hub rated for 3.5K axles, bearings, 1.718 grease seal, standard dust cap and lug nuts.
Bolt Circle: 5 on 4.5"

Stock# 5331205
One cast iron hub rated for 3.5K axles, bearings, 1.718" ID grease seal, E-Z lube grease cap with rubber plug, lug nuts and spindle nut retainer. Bolt Circle: 5 on 4.5"

Stock# 5331204
Includes: One cast iron hub rated for 3.5K axles, bearings, 1.718 grease seal, standard dust cap and lug nuts.
Bolt Circle: 5 on 4.75"

Stock# 5331063
Includes races, bearings, seal, lug nuts & dust cap, 5" Bolt Circle
SUPPLIES LIMITED

Stock# 5331207
Includes: One cast iron hub rated for 3.5K axles, bearings, 1.718" ID grease seal, standard dust cap and lug nuts. Bolt Circle: 5 on 5.5"

Stock# 5331206
Includes: One cast iron hub rated for 3.5K axles, bearings, 1.718" ID grease seal, standard dust cap and lug nuts.
Bolt Circle: 6 on 5.50"

Stock# 5331208
6 stud on 5.5" bolt circle. Includes 1-3/4"(25580) x 1-1/4"(LM67048) bearings, 2.125" ID seal, standard grease cap & lug nuts.    DEXTER Part #K08-213-90

Stock# 5331116
8 stud on 6.5" bolt circle. Includes 1-3/4"(25580) x 1-1/4"(14125A) bearings, 2.25" ID seal, EZ-Lube cap & lug nuts.    DEXTER Part #K08-231-9B

Stock# 5331210
8 stud on 6.5" bolt circle. Includes 1-3/4"(25580) x 1-1/4"(02475) bearings, 2.25" ID seal, standard grease cap & lug nuts.    DEXTER Part #K08-287-9A

Stock# 5331211
8 stud on 6.5" bolt circle. Includes 1-3/4"(25580) x 1-1/4"(02475) bearings, 2.25" ID seal, EZ-Lube cap & lug nuts.    DEXTER Part #K08-287-9B

Stock# 5331324
Oil hub with 8 Studs on 6-1/2" bolt circle designed for 9k and 10k drums built after July 2009.  Includes wheel bearings 2-1/4" (160430) x 1-3/4" (25580), oil seal (I.D. = 2.875"), 5/8" x 18 pressed studs and oil cap with o-ring and plug.

Stock# 5331105
8 stud on 6.5" bolt circle. Includes 2-1/4"(387A) x 1-3/4"(25580) bearings, Oil seal, Oil cap w/Rubber plug, "O" Ring, 90° cone nuts & Clamp Ring. DEXTER Part #K08-288-91

Stock# 5331317
DEXTER Nev-R-Lube™ 42mm Bearing Cartridge is a direct replacement cartridge.  This cartridge are designed to be used on D52 and D60 Leaf Spring axles; #11 and #12 Torflex axles up to 6,000 lbs. that have the Nev-R-Lube™ spindle.  These cartridges are not designed for marine use.

Stock# 5331316
DEXTER Nev-R-Lube™ 50mm Bearing Cartridge is a direct replacement cartridge. This cartridge are designed to be used on D70 and D80 leaf sprung axles, #12 and #13 Torflex axles rated to 8,000 lbs that have the Nev-R-Lube™ spindle. These cartridges are not designed for marine use.

Stock# 5331142
3.265" O.D. outer bearing cup. Used with bearing cone #25580
Dexter Part #031-030-01

Stock# 5331140
3.813" O.D. inner bearing cup for 9K and 10K oil bath drums.Used with bearing cone #387A
Dexter Part #031-019-01

Stock# 5331147
4.331" O.D. inner bearing cup for 10K Heavy Duty trailer drums.Used with bearing cone #395S
Dexter Part #031-022-01

Stock# 5331227
Outer Bearing Cone with 1.250 Inside diameter. Bearing cone # 02475. Dexter part# 031-028-02. Used with bearing cup/race # 02420. Fits Kodiak 8K.

Stock# 5331141
1-3/4" I.D. outer bearing cone. Used with bearing cup/race #25520
Dexter Part #031-030-02

Stock# 5331377
Outer Bearing Cone fits AL-KO and Hayes Axle 10K - 12K GD axles with #120 spindles.
Dexter part# 031-096-02.

Stock# 5331378
Inner Bearing Cone fits AL-KO and Hayes Axle 10K GD axles with #99 spindles.
Dexter part# 031-090-02. Used with bearing cup/race # 25580

Stock# 5331139
2-1/4" I.D. inner bearing cone for 9K and 10K oil bath drums.Used with bearing cup/race #382A
Dexter Part #031-019-02

Stock# 5331376
Inner Bearing Cone fits AL-KO and Hayes Axle 10K-12KGD axles with #120 spindles.
Dexter part# 031-095-02.

Stock# 5331146
2-5/8" I.D. inner bearing cone used on many 10K Heavy Duty trailer drums. Used with bearing cup/race #394A
Dexter Part #031-022-02

Stock# 5331095
1.50" lip ID x 1.987" Seal OD, fits Dexter 7" Hubs / Drums and 2200 lb. Reliable Axles with 1-1/4" spindle

Stock# 5331097
1.72" lip ID x 2.565" Seal OD, fits Dexter 10" x 2-1/4" Hubs / Drums. Used with 1-3/8" ID wheel bearings (L68149).

Stock# 5331096
1.75" lip ID x 2.33" Seal OD, fits Dexter 10" x 1-1/2" Hubs / Drums (pre-1998). Used with 1-1/4" ID wheel bearings (LM67048).

Stock# 5331103
1.938" lip ID x 2.51" Seal OD, fits Dexter 12" x 2" MHU Hubs / Drums.

Stock# 5331092
2.125" lip ID, fits 5200 lb. round tube axles and Dexter 12" x 2" Hubs / Drums. Used with 1-3/4" ID wheel bearings (25580). Sold as each.

Stock# 5331098
Rubber Body 2.125" lip ID x 3.376" Seal OD, fits Dexter 12" x 2" Hubs / Drums (prior to 1998). Used with 1-3/4" ID wheel bearings (25580).

Stock# 5331099
2.25" lip ID x 3.371" Seal OD, fits Dexter 12" x 2" Hubs / Drums (after 1998). Used with 1-3/4" ID wheel bearings (25580).

Stock# 5331100
Rubber body 2.25" lip ID x 3.376" Seal OD, fits Dexter 7.2k and 8k Unitized Hubs / Drums.

Stock# 5331375
Rubber/Metal body 2.75" lip ID x 3.77" Seal OD fits Dexter, ALKO, and Hayes Axle 10k GD Hubs / Drums with #99 spindles.

Stock# 5331101
Rubber/Metal body 2.875" lip ID x 3.88" Seal OD, fits Dexter 9k and 10k GD Unitized Hubs / Drums.

Stock# 5331102
Rubber/Metal body 3.125" lip ID x 4.506" Seal OD, fits Dexter 10k and 15k HD Unitized Hubs / Drums.

Stock# 5331283
Dexter kit # K71-314-00 dust caps fit 7", 10" x 1-1/2" and 10" x 2-1/4" Dexter hubs/drums.
Includes: (2) 1.99" O.D. metal grease caps.

Stock# 5331284
Dexter kit # K71-316-00 dust caps fit 12" x 2" Dexter hubs/drums.
Includes: (2) 2.45" O.D. metal grease caps.

Stock# 5331285
Dexter kit # K71-318-00 chrome dust caps fit 12" x 2" eight bolt Dexter hubs/drums.
Includes: (2) 2.72" O.D. metal grease caps.

Stock# 5331280
Dexter Nev-R-Lube grease caps fit 35mm Nev-R-lube hubs. Sold in pairs.

Stock# 5331281
Dexter 42mm Nev-R-Lube grease caps fit Dexter Nev-R-lube hub/Drum (008-388-80). Sold in pairs.

Stock# 5331282
Dexter 50mm Nev-R-Lube grease caps fit Dexter Nev-R-lube hub/Drum (008-385-80). Sold in pairs.

Stock# 5331016
Dexter kit # K71-320-00 rubber center plugs fit all Dexter E-Z Lube metal dust caps.

Stock# 5331013
Dexter kit # K71-315-00 chrome dust caps fit 7", 10" x 1-1/2" and 10" x 2-1/4" Dexter hubs/drums. Removable center plug allows for easy access to spindle zerk fitting.

Stock# 5331014
Dexter kit # K71-317-00 chrome dust caps fit 12" x 2" Dexter 5-Lug & 6-Lug hubs/drums. Removable center plug allows for easy access to spindle zerk fitting.

Stock# 5331015
Dexter kit # K71-319-00 chrome dust caps fit 12" x 2" Dexter 8-Lug hubs/drums. Removable center plug allows for easy access to spindle zerk fitting.

Stock# 5331315
Dexter replacement oil cap plug for most 6k-15k dexter oil bath plastic caps.
Fits Dexter Parts: 021-035-00, 021-036-00, or 021-040-00

Stock# 5331322
Dexter kit # K71-704-00 fits Fits Dexter 9K, 10GD, and #13G drums. (after July 2009) Cap #21-88.

Stock# 5331278
Dexter replacement oil cap for 9k, 10k & 13K 1-piece drums after 2009. Cap has 3-1/2" OD thread.
Includes: (1) clear plastic oil cap

Stock# 5331035
Dexter kit # K71-038-00 fits 6k, 8k and 9k (before 10/89) screw-in 2-7/8"-12 thread hubs/drums. Cap #21-35.

Stock# 5331036
Dexter kit # K71-148-00 fits 9k (after 10-1-89) and 10k GD screw-in 4"-12 thread hubs/drums. Cap #21-36.

Stock# 5331295
The Dexter wheel bolt kit includes (5) 60 degrees, .88 long, 1/2 - 20 UNF wheel bolts (007-040-00).

Stock# 7107179
Zinc plated lug nuts with a 60 degree cone and 1/2"-20 thread (6-pack) for studded trailer wheel hubs, brake drums or disc brake rotors.

Stock# 7107178
Zinc plated 9/16" I.D. rim clamp used to mount wheels to Dexter 5-Spoke 12"x2" Demountable Brake Drum. 5- Pack

Stock# 5331164
Zinc plated 9/16" I.D. rim clamp used to mount wheels to Dexter 5-Spoke 12"x2" Demountable Brake Drum.
Dexter Part #015-002-00

Stock# 7107180
Zinc plated 5/8"-18 UNF x 90 degree cone trailer wheel lug nut. Common on 8k capacity and above Dexter hubs and drums.  4-Pack

Stock# 5331165
Zinc plated 9/16"-18 x 60 degree cone trailer wheel lug nut. Common on 7k capacity and above Dexter hubs and drums.
Dexter Part #006-053-00

Stock# 5331163
Zinc plated 9/16"-18 hex nut used to mount wheels to Dexter 5-Spoke 12"x2" Demountable Brake Drum.
Dexter Part #006-005-00

Stock# 5331167
Zinc plated 5/8"-18 UNF x 90 degree cone trailer wheel lug nut. Common on 8k capacity and above Dexter hubs and drums.
Dexter Part #006-109-00

Stock# 5331166
Zinc plated 5/8"-18 Flange Nuts. Common on 8k capacity and above Dexter dual wheel applications.

Stock# 5331320
The Dexter press-in wheel stud measures 2.65" long, 1-1/4" spline and .54" knurl. Used with Dexter 5.2K thru 7K hubs manufactured after 2003.

Stock# 5331296
The Dexter wheel bolt kit includes (5) 1.63 long, 1/2 - 13 UNC wheel bolts (007-040-00) that fit Dexter MH hubs.

Stock# 5331293
The Dexter press-in wheel stud kit includes (6) 1.99 long, 1/2 - 20 UNF press-In wheel studs (007-122-00).

Stock# 5331289
The Dexter wheel mounting studs have 1/2 - 20 hub thread and 1/2 - 20 nut thread and are 2" in total length. Includes (4) Wheel Mounting Studs (025-053-00).

Stock# 7107181
The Dexter press-in wheel stud kit includes (4) 5/8 - 18 UNF press-in wheel studs (007-115-00). Stud has .688" knurl diameter, .495" Insert length, 3.19" length, and thread length is 2".