INTELLI-HITCH 2.5 Brake Controller In The Hitch #8069-0002-1230
My Cart (0)
Phone Sales & Technical Support
Mon - Thur 8am-6pm
Fri - Sat 8am-5pm


INTELLI-HITCH 2.5 Brake Controller In The Hitch #8069-0002-1230

Our Price: $579.00

Be the first to review this product

More Views

Intelli-Hitch 2.5 comes complete with the best trailer brake controller in the industry. 2-1/2″ shaft to fit most trucks. Has a 12,000 lb rating. Sleek and durable black powder coat finish. Comes with a 1 Year limited warranty. And finally the comfort in knowing that each Intelli-Hitch was hand built in Texas, USA.

Works Better and Stops Faster: Intelli-Hitch incorporates our proprietary “in-hitch trailer brake controller” with a sturdy Class IV drop hitch. Intelli-Hitch constantly monitors the motion between the trailer and tow vehicle, applying exact proportional braking to the trailer. Intelli-Hitch's microprocessor reads, reacts and provides exact braking in less than a nano-second. It's pretty remarkable and it's also the highest performing/safest brake controller on the market.   Reverse with Ease: Where surge brakes fail in reverse, the Intelli-Hitch really shines. Our reversing algorithms allow for a first in proportional braking during backing; a “Descend Assist” program helps in holding the trailer steady when backing down a slope such as a boat ramp. Intelli-Hitch simply works, no adjusting, no settings, just plug and play.     Unique and Portable:Like conventional receiver hitches, Intelli-Hitch can be installed in just seconds, then at any time, moved to another vehicle. Unlike any other hitch, the braking system (brake controller) is actually embedded into the hitch frame so moving the Intelli-Hitch then takes the brake controls with it. This feature makes Intelli-Hitch the only portable comprehensive trailer brake control in the industry! Not only is it the best brake controller in the industry but it's everything you need to tow... All in one

Features and Technical Data:
Frame - welded steel construction with internal polyurethane shock absorption system Ball foot (ball mount): welded steel construction, powder coated. I-Channel: Standard 3" i.d. w/ .625 pins on 1" centers. I-Channel Adjustment: 11 pin holes, 3rd pin at C/L of receiver. Ball Foot offset: Approx .600" Adjustment range (measured on C/L of receiver shank) + 2" & -7" - Range 9" overall Shock absorption: bi-directional limited throw shock suppression. In-Receiver movement range: Approx .300" /~.505" at extreme limits. Hitch pin: Non-proprietary, standard .625" keyed pin supplied. Other industry-standard pins may be used. Coating & Finish: Gloss black, marine-type powder coating. Care & Cleaning - Wash with mild soap & water - lubricate draw shank per installation instruction. Finish may be waxed with conventional auto waxes. Storage: Store in dry location when not in use. Country of Manufacture: U.S.A. - 100% (excluding supplied balls - C.O.A. - other)

Electrical Specs:
Cabling: To vehicle: Standard 7-round male plug. From Trailer: Standard 7-round female receptacle. Processor: Embedded SOC 32-bit 32mhz microprocessor, elastomer potted for moisture protection - permanently mounted. Power-up time: <120ms Sampling time: < 150ms Brake Ramp-Up time (software limited): <100ms Brake Ramp-Down time (software limited): <100ms Current load thresholds: Sustained: 5A, Intermediate: 10A, Peak: 20A

Electrical (Usage) Requirements:
Vehicle: 7-round plug must be fully enabled, including the break-away/charge circuit. (charge circuit should be verified BEFORE Intelli-Hitch installation.) Trailer: Standard implementations of 12V electric brakes for single or dual-axle trailers w/ 7-round plug.    

       NATDS Winner

MPN: 8069-0002-1230
Product Video

Stock # 7128002