Axle Spindle Nuts, Washers and Hardware

Stock# 7155019   FREE GROUND SHIPPING TO LOWER-48 U.S.
TPS 3/16" x 2-3/8" steel cotter pin.  Sold as each.

Stock# 7155016   FREE GROUND SHIPPING TO LOWER-48 U.S.
TPS Castle style axle spindle nut fits standard 1"-14 threaded spindles.

Stock# 5421084
Metric Castle Nut for Venture Trailer models VB-1000, 1300 and VW-1200 starting in 2007. Can also be used with other spindles that use 25mm Metric trailer bearings.

Stock# 5500093
Castle style trailer axle spindle nut fits standard 3/4"-16 threaded spindles.

Stock# 5500046
Castle style axle spindle nut fits standard 1"-14 threaded spindles

Stock# 5212190
Trailer Axle spindle hardware kit contains a pair of each: 1" - 14 Nut, 1" ID Washer, 1/8" x 2-1/4" Cotter Pin.

Stock# 5331417
DEXTER Nev-R-Lube 1" I.D. locking spindle nut.

Stock# 7125129
Zinc Plated castle nut for mounting Tie Down Engineering's Eliminator Torsion Axle removable spindles.

Stock# 5291024
13/16" I.D. axle spindle nut for EZ-Loader axles. 20 threads per inch.

Stock# 5422297
SHORELAND'R axle spindle washer fits 3/4" diameter thread spindles.

Stock# 5500048
Full Round style axle spindle washer fits standard 1" O.D. threaded axle spindles.

Stock# 5439265
Full Round style axle spindle washer fits standard 1" O.D. threaded axle spindles.

Stock# 5331416
Full Round style heavy duty axle spindle washer fits standard 1" O.D. threaded axle spindles.

Stock# 5331415
Full Round style heavy duty axle spindle washer fits standard 1" O.D. threaded axle spindles.

Stock# 5439276
Full Round style heavy duty axle spindle washer fits standard 1" O.D. threaded axle spindles.

Stock# 5291155
EZ-LOADER 'D-Shape' axle spindle washer fits 3/4" thread spindles with 'flat spot'.

Stock# 5439266
LIPPERT 'D-Shape' axle spindle washer fits 1" thread spindles with 'flat spot'.

Stock# 5500047
'D-Shape' axle spindle washer fits 1" thread spindles with 'flat spot'.

Stock# 5291025
13/16" I.D. 'Tooth' style axle spindle washer for EZ-Loader trailer axles

Stock# 7125125
For use with posi-lube spindle and other tang washer applications.

Stock# 5439267
For use with posi-lube spindle and other tang washer applications.

Stock# 5331314
Fits Dexter 'D'-Washer style E-Z Lube axles.  Includes: (1) 1" I.D. 'D'-style nut retainer.

Stock# 1041011
Axle nut retainer for 13/16" 'D' style spindles with cotter pin hole. Common on LOADRITE & EZ-LOADER axles.

Stock# 5331430
For use with 9K to 10K General Duty trailer axle spindles that are 1-1/2" diameter.

Stock# 5331429
For use with 10K Heavy Duty to 15K trailer axle spindles that are 1-3/4" diameter.

Stock# 7125027
Set Contains: 1" - 14 Nut (1), 1" ID Washer (1), 1/8-2" Cotter Pin (1). Redesigned to 12-slot nut in July 2015.

Stock# 7115151
CARRY-ON castle nut kit includes: (1) 1" - 14 Nut , (1) 1" ID Washer and (1) 1/8-2" Cotter Pin. Designed to be used with Carry-On 1-1/16" spindles.

Stock# 1041412
LOADRITE spindle nut kit comes with a 3/4" nut retainer, 13/16" x 20 spindle nut, 3/4" I.D. x 1-1/2" O.D. "D" washer, and a 2-1/8" cotter pin. Commonly used on LOADRITE & EZ-LOADER trailer axles.

Stock# 5446248
Fits Dexter 10" x 1-1/2" and 10" x 2-1/4" drums. Kit Includes: (2) 1"-14 thread slotted castle nuts, (2) 1" I.D. x 1-11/16" O.D. 'D'-style spindle washers and (2) 2-1/4" long cotter pins.
SUPPLIES LIMITED

Stock# 5331020
Fits Dexter 10" x 1-1/2" and 10" x 2-1/4" drums.    Kit Includes: (2) 1"-14 thread slotted castle nuts, (2) 1" I.D. x 1-11/16" O.D. 'D'-style spindle washers and (2) 2-1/4" long cotter pins.

Stock# 5446247
Fits Dexter 12" x 2" and 8k drums.   Kit Includes: (2) 1"-14 thread 12 or 6 slot castle nuts, (2) 1" I.D. x 2" O.D. 'D'-style spindle washers and (2) 2-1/4" long cotter pins.

Stock# 5331021
Fits Dexter 12" x 2" and 8k drums.   Kit Includes: (2) 1"-14 thread 12-slot castle nuts, (2) 1" I.D. x 2" O.D. 'D'-style spindle washers and (2) 2-1/4" long cotter pins.

Stock# 5446249
Fits Dexter E-Z Lube axles.   Kit Includes: (2) 1"-14 thread 6-slot castle nuts, (2) 1" I.D. x 1-11/16" O.D. 'D'-style spindle washers and (2) 1" I.D. 'D'-style tang washers.

Stock# 5331019
Fits Dexter E-Z Lube axles.   Kit Includes: (2) 1"-14 thread 6-slot castle nuts, (2) 1" I.D. x 1-11/16" O.D. 'D'-style spindle washers and (2) 1" I.D. 'D'-style tang washers.

Stock# 5331037
Fits Dexter 'D'-Washer style E-Z Lube axles.   Kit Includes: (2) 1"-14 thread hex jam nuts, (2) 1" I.D. x 1-11/16" O.D. 'D'-style spindle washers and (2) 1" I.D. 'D'-style nut retainers.

Stock# 5331023
Fits Dexter 9k drums (after 10-1-89) and 10k GD drums. (for one drum)   Kit Includes: (2) 1-1/2"-12 thread spindle nuts, (1) 1-1/2" I.D. x 2-3/16" O.D. single-tooth spindle washer and (1) 1-1/2" I.D. tang washer.

Stock# 5446250
Fits Dexter 10k HD, 12k and 15k drums. (for one drum)   Kit Includes: (2) 1-3/4"-12 thread spindle nuts, (1) 1-3/4" I.D. x 3" O.D. single-tooth spindle washer and (1) 1-3/4" I.D. single-tooth tang washer.
SUPPLIES LIMITED

Stock# 5331024
Fits Dexter 10k HD, 12k and 15k drums. (for one drum)   Kit Includes: (2) 1-3/4"-12 thread spindle nuts, (1) 1-3/4" I.D. x 3" O.D. single-tooth spindle washer and (1) 1-3/4" I.D. single-tooth tang washer.

Stock# 7125130
Stainless Steel cotter pin for mounting Tie Down Engineering's Eliminator Torsion Axle removable spindles.

Stock# 5049063
HandiMan Marine corrosion resistant 1/8" x 1-1/2" stainless steel cotter pins. (4-Pack)

Stock# 5049064
HandiMan Marine corrosion resistant 1/8" x 1-3/4" stainless steel cotter pins. (4-Pack)

Stock# 5331387
1/8" x 2" steel cotter pin. Sold as each.

Stock# 5049065
HandiMan Marine corrosion resistant 1/8" x 2" stainless steel cotter pins. (2-Pack)

Stock# 5049066    Top Seller
HandiMan Marine corrosion resistant 1/8" x 2-1/2" stainless steel cotter pins. (2-Pack)

Stock# 5428065
Replacement zerk fitting fits the MAGIC TILT posi lube axle spindles, thread in. (Single)

Stock# 7125159
Replacement zerk fitting fits the Tie Down Engineering's Super Lube spindles.  (Single)

Stock# 5331018
1/4"-28 thread zerk fittings for .230/.235" diameter hole. Fits Dexter E-Z Lube spindles, shackle bolts & hanger bolts.

Stock# 7125128
Zinc Plated conical spring washer for mounting Tie Down Engineering's Eliminator Torsion Axle removable spindles.

Stock# 5266116
Dayton 3-1/4" outer axle nut (with dowel pin) fits Dan P22, Roc Q / R / S / T Dr / TP applications.
SUPPLIES LIMITED ( QTY 4 )

Stock# 5266118
Dayton 3-1/4" lock ring with holes fits Dan P22, Roc Q / R / S / T Dr applications.
SUPPLIES LIMITED ( QTY 1 )