Electric Trailer Brake Parts & Accessories

Stock# 5177068
Battery with box, trickle charger, breakaway switch.
A legal requirement in most states for towing trailers with electric brakes. 5 amp/hour battery.

Stock# 5177069
Trailer break-away kit features an LED test meter to show charge state of emergency battery. A legal requirement in most states for towing trailers with electric brakes. 5 amp/hour battery.

Stock# 5223297
Shur-Set III® Breakaway System with 5 Amp/Hour Battery. A legal requirement in most states for towing trailers with electric brakes. For use on single, tandem and tri-axle trailers with 12 volt electric brakes. Includes mounting hardware, 5 Amp battery, battery box, breakaway switch and complete installation instructions.

Stock# 5331138
Battery with box, trickle charger and breakaway switch/cable. Recommended for Electric-Over-Hydraulic trailer brake actuators. 9 amp/hour battery.

Stock# 5237113
Two battery boxes, breakaway switch with cable and two 5 amp/hour gel cell batteries. Recommended for TITAN Electric-Over-Hydraulic trailer brake actuators. Complete installation instructions included.
NOTE: Will not work with DEXTER Electric-Over-Hydraulic actuators.

Stock# 5177074
Battery supplies 12 volt current to apply electric brakes if trailer disconnects from tow vehicle. 5 amp/hour battery.

Stock# 5223296
Tekonsha 2025-09 AC/DC Charger is designed to charge any rechargeable 12 volt LEAD-ACID, wet additive or sealed gel-cell type battery with a 4 amp hour rating or above.
SUPPLIES LIMITED

Stock# 5177071
Supplies trickle charge to breakaway battery when connected to tow vehicle thru trailer plug

Stock# 5177070
Switch activates battery voltage to electric brakes if cable pulls out.

Stock# 5177073
Replacement cable & pin for Breakaway Switch.

Stock# 5331003
DEXTER 7" x 1-1/4" Magnet kit includes (1) magnet assembly, clip & spring. Fits 7" diameter 2,200 lbs. capacity electric brakes.

Stock# 5331041
DEXTER 10" x 1-1/2" Electric trailer brake shoe & lining replacement kit, 1 wheel. Fits 10" 2,200 lbs. capacity electric trailer brakes.

Stock# 5331007
DEXTER 10" x 2-1/4" Electric trailer brake shoe & lining replacement kit, 1 wheel. Fits 10" 3,500 lbs. capacity electric trailer brakes.

Stock# 5331008
DEXTER 10" x 2-1/4" Magnet kit includes (1) magnet assembly, clip & spring. Fits 10" diameter 3,500 lbs. capacity electric brakes.

Stock# 5331228
DEXTER 10" x 2-1/4" Self Adjusting Electric trailer brake shoe & lining replacement kit, 1 right hand wheel.
Dexter part # K71-682-00, includes (1) primary shoe & lining, (1) secondary shoe & lining, (2) Shoe Hold Down Springs, (2) Hold Down Pins and instruction sheet. For 3,500 lbs. capacity axles.

Stock# 5331229
DEXTER 10" x 2-1/4" Self Adjusting Electric trailer brake shoe & lining replacement kit, 1 left hand wheel.
Dexter part # K71-681-00, includes (1) primary shoe & lining, (1) secondary shoe & lining, (2) Shoe Hold Down Springs, (2) Hold Down Pins and instruction sheet. For 3,500 lbs. capacity axles.

Stock# 5331012
DEXTER 12" x 2" DXQ Electric trailer brake shoe & lining replacement kit, 1 wheel. Fits 12" 5,200 lbs. capacity electric trailer brakes.

Stock# 5331011
DEXTER 12" x 2" DXQ Magnet kit includes (1) magnet assembly, retainer & spring. Fits 12" diameter 5,200 lbs. capacity electric brakes.

Stock# 5331230
DEXTER 12" x 2" Self Adjusting Electric trailer brake shoe & lining replacement kit, 1 right hand wheel.
Dexter part # K71-674-00, includes (1) primary shoe & lining, (1) secondary shoe & lining, (2) Shoe Hold Down Springs, (2) Hold Down Pins and instruction sheet. Fits 6,000 lbs. capacity self adjusting electric brakes.

Stock# 5331231
DEXTER 12" x 2" Self Adjusting Electric trailer brake shoe & lining replacement kit, 1 left hand wheel.
Dexter part # K71-673-00, includes (1) primary shoe & lining, (1) secondary shoe & lining, (2) Shoe Hold Down Springs, (2) Hold Down Pins and instruction sheet. Fits 6,000 lbs. capacity self adjusting electric brakes.

Stock# 5331232
DEXTER 12" x 2" Self Adjusting Electric trailer brake shoe & lining replacement kit, 1 right hand wheel.
Dexter part # K71-676-00, includes (1) primary shoe & lining, (1) secondary shoe & lining, (2) Shoe Hold Down Springs, (2) Hold Down Pins and instruction sheet. Fits 7,000 lbs. capacity self adjusting electric brakes.

Stock# 5331233
DEXTER 12" x 2" Self Adjusting Electric trailer brake shoe & lining replacement kit, 1 left hand wheel.
Dexter part # K71-675-00, includes (1) primary shoe & lining, (1) secondary shoe & lining, (2) Shoe Hold Down Springs, (2) Hold Down Pins and instruction sheet. Fits 7,000 lbs. capacity self adjusting electric brakes.

Stock# 5331022
DEXTER 12" x 2" Electric trailer brake shoe & lining replacement kit, 1 wheel. Fits 12" 6,000 lbs. & 7,000 lbs. capacity electric trailer brakes.

Stock# 5331057
DEXTER 12" x 2" Magnet kit includes (1) magnet assembly, retainer & spring. Fits 12" diameter 7,000 lbs. capacity electric brakes.

Stock# 5331066
DEXTER 12-1/4" x 2-1/2" Magnet kit includes (1) magnet assembly, retainer & spring. Fits 12-1/4" diameter 7,200 lbs. capacity electric brakes.

Stock# 5331045
Fits CAST Backing Plate (April, 2000 & newer) Dexter electric trailer brakes. (8k, 9k, 10kGD) Right Hand trailer brake shoe replacement kit.

Stock# 5331044
Fits CAST Backing Plate (April, 2000 & newer) Dexter electric trailer brakes. (8k, 9k, 10kGD) Left Hand trailer brake shoe replacement kit.

Stock# 5331067
DEXTER 12-1/4" x 3-3/8" Magnet kit includes (1) magnet assembly, retainer & spring. Fits 12-1/4" diameter 8,000 lbs. capacity electric brakes made after 6/92.

Stock# 5331047
Fits STAMPED Backing Plate (prior to April 2000) Dexter electric trailer brakes. (8k, 9k, 10kGD) Right Hand trailer brake shoe replacement kit.

Stock# 5331046
Fits STAMPED Backing Plate (prior to April 2000) Dexter electric trailer brakes. (8k, 9k, 10kGD) Left Hand trailer brake shoe replacement kit.

Stock# 5331194
Dexter 12-1/4" x 3-3/8" brake dust shields (9k-10k) keeps road debris and the elements off the brake assembly to improve the life of your brakes.

Stock# 5331051
Fits CAST Backing Plate (April, 2000 & newer) Dexter electric trailer brakes. (10kHD) Right Hand trailer brake shoe replacement kit.

Stock# 5331050
Fits CAST Backing Plate (April, 2000 & newer) Dexter electric trailer brakes. (10kHD) Left Hand trailer brake shoe replacement kit.

Stock# 5331049
Fits STAMPED Backing Plate (prior to April 2000) Dexter electric trailer brakes. (10kHD) Right Hand trailer brake shoe replacement kit.

Stock# 5331048
Fits STAMPED Backing Plate (prior to April 2000) Dexter electric trailer brakes. (10kHD) Left Hand trailer brake shoe replacement kit.

Stock# 5331052
DEXTER 12-1/4" x 3-3/8" and 12-1/4" x 4" Magnet kit includes (1) magnet assembly, retainer & spring. Fits 12-1/4" diameter 9k & 10k capacity electric brakes.

Stock# 5331218
Fits CAST Backing Plate (April, 2000 & newer) Dexter electric trailer brakes. (12-15k) Right Hand trailer brake shoe replacement kit.

Stock# 5331219
Fits CAST Backing Plate (April, 2000 & newer) Dexter electric trailer brakes. (12-15k) Left Hand trailer brake shoe replacement kit.

Stock# 5331068
DEXTER 12-1/4" x 5" Magnet kit includes (1) magnet assembly, retainer & spring. Fits 12-1/4" diameter 12,000 lbs. capacity electric brakes made after 6/92.

Stock# 5331189
Dexter Clamp Ring for Dexter 9k and 10k hubs with 8 on 6.5 with 5/8" studs.

Stock# 5331195
Dexter 12-1/4" x 4" brake dust shields (10k) keeps road debris and the elements off the brake assembly to improve the life of your brakes.

Stock# 5331196
Dexter 12-1/4" x 5" brake dust shields (12k-15k) keeps road debris and the element off the brake assembly to improve the life of your brakes.

Stock# 5331178
Dexter brake mounting bolt attaches brake backing plates to axle brake flanges.
Note: 3/8" Press in brake stud for 12" x 2" electric brake assemblies.  Dexter Part #007-112-00

Stock# 5331179
Dexter brake backing plate mounting nut/washer. Used to attach electric or hydraulic brake baking plates to axle brake flange. 3/8"- 24 thread.   Dexter Part #006-193-00

Stock# 5331144
Dexter brake mounting bolt attaches brake backing plates to axle brake flanges.   Dexter Part #007-116-00
Note: 7/16" bolts will not work with the 12" x 2" electric brake assemblies.

Stock# 5331193
Dexter brake mounting lock washer is used to attache brake backing plates to axle brake flanges.
Dexter #005-008-00

Stock# 5331145
Dexter brake mounting nut is used to attache brake backing plates to axle brake flanges.
Dexter Part #006-017-00

Stock# 5331197
Dexter brake mounting bolt attaches brake backing plates to axle brake flanges. Dexter #007-251-00
Note: 1/2" Press in brake stud for 12-1/4" x 2-1/2" electric brake assemblies.

Stock# 5331190
Dexter brake mounting nut is used to attache brake backing plates to axle brake flanges.
Dexter #006-129-00

Stock# 5331187
Dexter electric trailer brake magnet retainer clip is used to attach the magnet to the lever arm. Fits Dexter 10" x 1-1/2", 10" x 2-1/4" and 12" x 2"electric brake assemblies.

Stock# 5331188
Dexter electric trailer brake magnet retainer clip is used to attach the magnet to the lever arm. Fits Dexter 12-1/4" x 2-1/2", 12-1/4" x 3-3/8", 12-1/4" x 4", 12-1/4" x 5" electric brake assemblies.

Stock# 1536303-ORMD
B'LASTER® PB penetrating catalyst is a powerful and concentrated co-polymer penetrant that breaks loose surface tension rust and corrosion. The capillary action allows PB to "pull" itself uphill and into the tightest cavities to attack rust from all angles.
NOTE: SHIPS BY UPS GROUND SERVICE ONLY

Stock# 5250027-ORMD
CRC Freeze-Off helps unscrew rusted nuts and bolts. When the freezing fluid makes contact with the rusty surface, it cracks through the rust allowing the nut to be loosened.
NOTE: SHIPS BY UPS GROUND SERVICE ONLY

Stock# 5250031-ORMD
CRC Ultra Screwloose® is a concentrated penetrating solvent that helps free corroded fasteners and mechanical components super fast. While attacking corrosion, Screwloose® also lubricates and prevents corrosion build up.
NOTE: SHIPS BY UPS GROUND SERVICE ONLY