Trailer Lighting Parts and Accessories

Stock# 1672128
TecNiq offset license plate bracket designed for use with all tail lights that mount with studs or bolts on 2" centers.

Stock# 1672127
TecNiq license plate bracket designed for use with all tail lights that mount with studs or bolts on 2" centers.

Stock# 1672126
TecNiq Gray Plastic License Plate Bracket #L90-0G00-K features a Black polypropylene license plate frame and 2 x 1/4" mounting screws.

Stock# 1672125
TecNiq Black Plastic License Plate Bracket #L90-0B00-K features a Black polypropylene license plate frame and 2 x 1/4" mounting screws.

Stock# 1294431
OPTRONICS #LP52HP for mounting license plates to Optronics license plate holders / light brackets.

Stock# 1294430
OPTRONICS #A839B for use with Optronics ST/STL16/17 series lights. All Zinc Plated hardware.

Stock# 1294429
OPTRONICS #A830B for use with Optronics ST/STL16/17 series lights. All Stainless Steel hardware.

Stock# 5421114
Galvanized steel tail light mounting bracket with 2" light mounting holes. (Right Side)

Stock# 5421113
VENTURE galvanized steel tail light mounting bracket, 2" Light mounting holes. (Left Side)

Stock# 5212139
Zinc plated wire frame clips are perfect to assist in wiring a trailer.  They help secure wires where they need to be and are zinc plated so they will resist corrosion. The clips are 3/8" wide and clips to edges no thicker then 5/32". 10-Pack

Stock# 5463050-ORMD
Lucas Contact Cleaner aerosol is a unique blend of solvents, cleaning agents and propellants designed to remove oil, dirt and moisture from contact points in small electrical equipment, controls, ignition systems, motors, relays and thermostats. This non-chlorinated, CFC free, VOC compliant formula dries quickly and leaves no residue.
NOTE: SHIPS BY GROUND SERVICE ONLY

Stock# 5135035
Dielectric grease protects electrical connections and wiring from moisture, salt, dirt and corrosion. 2 oz. tube

Stock# 5444185
Use to protect trailer electrical connections and bulb contacts. 4 oz. tube. Ideal for heavy-duty, automotive, agricultural, marine, industrial, and recreational applications, Grote’s Ultra-Seal corrosion preventive sealant contained added tackifiers to improve adhesion and resistance to washout.

Stock# 5444186
Use to protect trailer electrical connections and bulb contacts. 8 oz. tub. Ideal for heavy-duty, automotive, agricultural, marine, industrial, and recreational applications, Grote’s Ultra-Seal corrosion preventive sealant contained added tackifiers to improve adhesion and resistance to washout.
SUPPLIES LIMITED

Stock# 5177099
Makes trouble-shooting trailer light problems quick and easy. Simply plug in vehicle's 4-way flat connector and test lights.

Stock# 5005025
Peterson mfg. #E55-15R, 2-3/4" x 2" replacement reflector lens.

Stock# 5005026
Includes: 1 tail lens (4-1/2" square), 1 red side marker lens (2-3/4" x 2")
Peterson mfg. lens kit #E440-15 contains the most popular lenses for the under 80" series trailer tail lights

Stock# 5005009
Replacement side lens for over 80" Peterson 452 series tail lights.  Fits left or right tail light, and includes (1) lens with mounting screws.

Stock# 5005024
Old Style Peterson mfg. #55-15A, 2-3/4" x 2" replacement reflector lens.

Stock# 1294188
Replacement reflector lens for Optronics lights series STL 16 / 17.
Dimensions: 2-1/16" x 2-7/8"
SUPPLIES LIMITED

Stock# 7102001
TRITON license plate bracket designed for use with all tail lights that mount with studs or bolts on 2" centers.

Stock# 7102090
TRITON license plate bracket with light is designed for use with all tail lights that mount with studs or bolts on 2" centers.

Stock# 5005016
Peterson mfg. license plate bracket designed for use with all tail lights.

Stock# 7115191
CARRY-ON license plate bracket.

Stock# 5005042
Peterson mfg. license plate bracket designed for use with all taillights.

Stock# 1294170
OPTRONICS black plastic license plate holder is designed for durability. Fits standard mounting hole spacing.

Stock# 5212137
Upgrade the appearance of your trailer with an aluminum tread plate license plate bracket. Fits standard left side DOT brake/tail lamps. No mounting hardware required. Installs between existing tail light mounting bracket and the left side tail light via the lamp's two mounting studs. Taillight not included.

Stock# 5416002
Stainless steel straight license plate bracket is designed for use with all tail lights with 2" mounting centers.

Stock# 5416001
Stainless Steel license plate bracket is designed for use with all tail lights with 2" mounting centers. Bends in the steel pushes the license plate back 1-3/8".

Stock# 5422211
SHORELAND'R license plate bracket designed for use with all tail lights that mount with studs or bolts on 2" centers.

Stock# 7107229
BIG TEX Stop, Tail & Turn Light / License Plate Bracket measures 5-3/4" H x 7-3/4" W. Bracket is constructed with raw steel and will need to be painted to match your trailer. Pre-drilled holes

Stock #1299229
HandiMan Truss Head Bolts have a low rounded top head surface with a flat bearing surface underneath. These bolts thread into 1/4-20 nuts or plastic license plate holders (not included).

Stock# 5005074
3" mounting bracket may be used with most marine taillights.

Stock# 5212025
CE SMITH Hot-dipped galvanized pre-punched bolt-on light mounting bracket. Bracket extends 4-1/2" from the mounting surface and is pre-punched for light studs, wiring and frame attachment.

Stock# 5421005
VENTURE galvanized steel tail light mounting bracket & rear step for use on Venture 3" x 4" or 3" x 5" frame rails. Commonly used on boat trailers over 3,000 lbs. GVWR. (Left Side)

Stock# 5421006
Galvanized steel tail light mounting bracket & rear step for use on Venture 3" x 4" or 3" x 5" frame rails. Commonly used on boat trailers over 3,000 lbs. GVWR. (Right Side)

Stock# 5257044
Hot-dipped galvanized right hand tail light mounting bracket with step pad / light protector. Holds standard 2" diameter studded tail lights.

Stock# 5257043
Hot-dipped galvanized left hand tail light mounting bracket with step pad / light protector. Holds standard 2" diameter studded tail lights.

Stock# 5428046
MAGIC TILT diamond plate aluminum taillight cover is constructed from heavy duty 3/16" aluminum and measures 10" in length. Helps prevent your taillight from being damaged. (Right side only) Mounting hardware not included.

Stock# 5428047
MAGIC TILT diamond plate aluminum taillight cover is constructed from heavy duty 3/16" aluminum and measures 10" in length. Helps prevent your taillight from being damaged. (Left side only) Mounting hardware not included.

Stock# 5428113
MAGIC TILT diamond plate aluminum taillight cover is constructed from heavy duty 3/16" aluminum and measures 8-1/4" in length and is specifically made for Jammy lights. Helps prevent your taillight from being damaged. (Right side only) Mounting hardware not included.

Stock# 5428114
MAGIC TILT diamond plate aluminum taillight cover is constructed from heavy duty 3/16" aluminum and measures 8-1/4" in length and is specifically made for Jammy lights. Helps prevent your taillight from being damaged. (Left side only) Mounting hardware not included.

Stock# 1041482
LOADRITE hot dip galvanized tail light mounting bracket measures 1/4" x 2-7/8" x 5-1/2".

Stock# 5454112
Hot dip galvanized 5" right hand tail light mounting bracket for use on SeaLion / TideWater with 3" x 3" trailer frame rails. Constructed from heavy-duty 11 gauge steel.
SUPPLIES LIMITED

Stock# 1041221
Hot dip galvanized tail light mounting bracket & rear step for use on 3" or 4" tall trailer frame rail.

Stock# 1041222
LOADRITE hot dip galvanized tail light mounting bracket & rear step for use on 3" or 4" tall trailer frame rail.

Stock# 7129190
The PJ Trailer FD/LD Straight Deck Inner Light Cover is the rear cover that protects the back side of the brake lights on bumper part number 160240. Constructed of raw steel and measures 25-1/2" x 10-1/2" x 6-1/2".
SUPPLIES LIMITED

Stock# 7129120
The PJ Trailer FD/LD Straight Deck Inner Light Cover is the rear cover that protects the back side of the brake lights on bumper part number 160240. Constructed of raw steel and measures 25-1/2" x 10-1/2" x 6-1/2".

Stock# 7129119
PJ TRAILER Inner Light Cover is the rear cover that protects the back side of the 3 center identification lights on bumper part number 160240. Constructed of raw steel and measures 55-1/2" x 3-1/2" x 2".
SUPPLIES LIMITED

Stock# 7129110
PJ TRAILER left hand oval / round light bracket is made from 18-gauge raw steel and is intended to be used with 2" round grommet mount trailer marker lights and 6" oval grommet mount trailer lights.

Stock# 7129111
PJ Trailer right hand oval / round light bracket is made from 18 gauge raw steel and is intended to be used with 2" round grommet mount trailer marker lights and 6" oval grommet mount trailer lights.

Stock# 7129088
PJ TRAILER left hand round light bracket is made from 18-gauge raw steel and is intended to be used with 2" round grommet mount trailer marker lights. Pre-drilled mounting slot on top for 3/8" hardware.

Stock# 7129189
The PJ Trailer right hand round light bracket is made from 18 gauge raw steel and is intended to be used with 2" round grommet mount trailer marker lights. Pre-drilled mounting slot on top for 3/8" hardware.

Stock# 7107225
The Big Tex Square Tail Light Bracket Right Hand measures 5-3/4" H x 5-3/8" W. Bracket is constructed with raw steel and will need to be painted to match your trailer. Pre-drilled holes at 2-1/8" on center.
SUPPLIES LIMITED

Stock# 1566207
PHILLIPS rubber cushion clamps are recommended for long-term applications and provide excellent vibration absorption and electrical insulation. (25 clamps per pack)

Stock# 1566208
PHILLIPS rubber cushion clamps are recommended for long-term applications and provide excellent vibration absorption and electrical insulation. (25 clamps per pack)

Stock# 1566209
Phillips rubber cushion clamps are recommended for long-term applications and provide excellent vibration absorption and electrical insulation. (25 clamps per pack)
SUPPLIES LIMITED

Stock# 1566210
PHILLIPS rubber cushion clamps are recommended for long-term applications and provide excellent vibration absorption and electrical insulation. (25 clamps per pack)

Stock# 1566211
PHILLIPS rubber cushion clamps are recommended for long-term applications and provide excellent vibration absorption and electrical insulation. (25 clamps per pack)

Stock# 1536342
The white nylon cable clamps absorb shock and vibration while reducing noise. The cable clamps are resistant to solvents, oils, acids and moisture. (25 clamps per pack)

Stock# 1536343
The white nylon cable clamps absorb shock and vibration while reducing noise. The cable clamps are resistant to solvents, oils, acids and moisture. (25 clamps per pack)

Stock# 5049404
HandiMan Marine heat shrink tubing is ideal for sealing electrical wire splices and crimped end connectors. Simply cut tubing to at least 1/2" past each break in wire insulation, slide into place and apply heat until tubing seals.

Stock# 5049405
HandiMan Marine heat shrink tubing is ideal for sealing electrical wire splices and crimped end connectors. Simply cut tubing to at least 1/2" past each break in wire insulation, slide into place and apply heat until tubing seals.

Stock# 5049406
HandiMan Marine heat shrink tubing is ideal for sealing electrical wire splices and crimped end connectors. Simply cut tubing to at least 1/2" past each break in wire insulation, slide into place and apply heat until tubing seals.

Stock# 5049407
HandiMan Marine heat shrink tubing is ideal for sealing electrical wire splices and crimped end connectors. Simply cut tubing to at least 1/2" past each break in wire insulation, slide into place and apply heat until tubing seals.

Stock# 5049408
HandiMan Marine heat shrink tubing is ideal for sealing electrical wire splices and crimped end connectors. Simply cut tubing to at least 1/2" past each break in wire insulation, slide into place and apply heat until tubing seals.

Stock# 7115016
Theses metal clips are designed to secure electrical wire to the frame of the trailer to prevent drooping and damage. (10-Pack)

Stock# 5212081
Galvanized bracket bolts to PVC Boat Guides for mounting tail lights up and out of water. One bracket per package.

Stock# 5049390
HandiMan Marine non-stripping splice connectors make connecting 14-18 gauge wires easy. Crimp with pliers, fold over top, and connection is finished.

Stock# 5049153
HandiMan black rubber grommet fits 1/4" hole with 1/16" panel thickness. Rubber grommets provide protection and abrasion resistance for electrical wires and wire bundles.

Stock# 5049156
HandiMan black rubber grommet fits 1/2" hole with 1/16" panel thickness. Rubber grommets provide protection and abrasion resistance for electrical wires and wire bundles.