Semi/Flatbed Trailer Landing Gear Parts

Stock# 5351010
Universal style crank handle used on SAF HOLLAND Landing Gear Sets. Crank is vertical folding with a 6.75" length. Sold as each.

Stock# 5351011
Universal style crank handle used on SAF HOLLAND Landing Gear Sets. Crank is vertical folding with a 12.38" length. Sold as each.

Stock# 5351012
Universal style crank handle used on SAF HOLLAND Landing Gear Sets. Crank is vertical folding with a 18.38" length. Sold as each.

Stock# 5351030
Crank handle used on SAF HOLLAND Mark V Landing Gear Sets. Crank is vertical folding with a 11.63" length. Sold as each.

Stock# 5351031
Crank handle used on SAF HOLLAND Mark V Landing Gear Sets. Crank is horizontal folding with a 11.63" length. Sold as each.

Stock# 5351013
Universal style crank handle used on SAF HOLLAND Landing Gear Sets. Crank is horizontal folding with a 6.75" length. Sold as each.

Stock# 5351014
Universal style crank handle used on SAF HOLLAND Landing Gear Sets. Crank is horizontal folding with a 12.38" length. Sold as each.

Stock# 5351015
Universal style crank handle used on SAF HOLLAND Landing Gear Sets. Crank is horizontal folding with a 18.38" length. Sold as each.

Stock# 5351016
The Easy-Bar is an ergonomic landing gear crank handle is specially designed to enable the use of both hands. It requires minimal effort and simplifies the task of the driver without losing speed. You can use the Easy-Bar in two positions, as a standard crank handle for maximum torque, or in the 45 degree position for maximum speed.
SUPPLIES LIMITED

Stock# 5213047
Replacement or add-on handle for the Atwood Manual Ball Screw Camper Jacks. Allows you to manually raise or lower your jacks.

Stock# 5351018
Universal style crank handle hanger used on SAF HOLLAND Landing Gear Sets. Hanger measures 4" in length. Sold as each.

Stock# 5351019
Universal style crank handle hanger used on SAF HOLLAND Landing Gear Sets. Hanger measures 6-1/2" in length. Sold as each.

Stock# 5351020
Universal style crank handle hanger used on SAF HOLLAND Landing Gear Sets. Hanger measures 10-1/4" in length. Sold as each.

Stock# 5351021
Standard Sand Shoe used on SAF HOLLAND Landing Gear Sets. Shoe measures 11.50" long by 10.00" wide and has a 3.82" hole center height. Sold as each.

Stock# 5351022
Standard Sand Shoe used on SAF HOLLAND Landing Gear Sets. Shoe measures 11.81" long by 10.00" wide and has a 4.50" hole center height. Sold as each.

Stock# 5351023
Standard Sand Shoe used on SAF HOLLAND Landing Gear Sets. Shoe measures 11.81" long by 12.00" wide and has a 4.50" hole center height. Sold as each.

Stock# 5351024
Low Profile and Weight Saver Sand Shoe used on SAF HOLLAND Landing Gear Sets. Shoe measures 11.81" long by 10.00" wide and has a 2.00" hole center height. Sold as each.

Stock# 5351026
Removable square cushion foot used on 51000 & 52000 series SAF HOLLAND Landing Gear Sets. Foot measures 11.38" long by 11.38" wide and has a 2.86" hole center height. Sold as each.

Stock# 5351025
Self Leveling Hollow Sand Shoe Axle used on SAF HOLLAND Landing Gear Sets. Axle measures 8.50" long by and has a 1.94" O.D. Sold as each.

Stock# 5351032
Hollow Sand Shoe Axle used on SAF HOLLAND Landing Gear Sets. Axle measures 8.50" long by and has a 1.94" O.D. Sold as each.

Stock# 5351029
Universal landing gear installation for SAF HOLLAND Landing Gear Sets include (2) brackets and (1) crank handle hanger.

Stock# 5351028
The SAF HOLLAND Shift Shaft Extension has an overall length of 8.90" and 7.25" hole center to hole center.

Stock# 5351027
The SAF HOLLAND Universal Landing Gear Cross Drive Shaft has an overall length of 68"

Stock# 5351005
Bevel and Pinion gear kit. Used on SAF HOLLAND 51000 Series Sidewind landing gear jack. Kit contains one bevel gear, one pinion gear and all other hardware needed for installation.

Stock# 5351004
Gear box repair kit. Used on SAF HOLLAND 51000 Series Sidewind landing gear jack. Kit Contains: Input gear, idle gear and all other hardware needed for installation.

Stock# 5351007
Bevel and Pinion gear kit. Used on SAF HOLLAND 50000 Series Sidewind landing gear jack. Kit contains one bevel gear, one pinion gear and all other hardware needed for installation.

Stock# 5351006
Gear box repair kit. Used on SAF HOLLAND 50000 Series landing gear jack. Kit Contains: Input gear, idle gear and all other hardware needed for installation.

Stock# 5351009
Bevel and Pinion gear kit. Used on SAF HOLLAND Mark V Series landing gear jack. Kit contains one bevel gear, one pinion gear and all other hardware needed for installation.