Tie-Down Rings, Hooks & Eye Bolts

Stock# 1326381
Light-duty surface mounted rope ring with integral bracket. Zinc plated steel ring. 1/4" diameter mounting holes.
Safe working load: 400 lbs.

Stock# 1326016
Light-duty 1/4" diameter wire, zinc plated and welded D-ring on a 14 gauge, zinc plated steel clip.
Safe working load: 1000 lbs.

Stock# 1326003
Medium-duty 1/4" diameter wire, zinc plated and welded D-ring on a formed, zinc plated steel clamp.
Safe working load: 1200 lbs.

Stock# 1326017
Light-duty 1/4" diameter wire, zinc plated D-ring on a surface mounted, zinc plated steel round pan.
Ultimate breaking strength: 800 lbs. Safe working load: 265 lbs.

Stock# 1326002
Light-duty 1/4" diameter wire, zinc plated D-ring on a flush mounted, zinc plated steel pan. Requires a 3" mounting hole in 3/8" material. Ultimate breaking strength: 800 lbs. Safe working load: 265 lbs.

Stock# 1326437
1" x 1/4" yellow zinc finished ring rotates a full 360° and is designed to be bolted to a floor or welded to steel. Not designed for lifting. Ultimate breaking strength: 1,800 lbs. Safe working load: 600 lbs.

Stock# 1326018
Formed 1/8" zinc plated steel pan houses a ductile iron ring. Installation requires a 3-5/8" hole with 7/8" clearance below surface. Ultimate breaking strength: 6,000 lbs. Safe working load: 2,000 lbs.

Stock# 1326183
Formed 1/8" zinc plated steel pan houses a ductile iron ring. Installation requires a 3-5/8" hole with 7/8" clearance below surface. Ultimate breaking strength: 6,000 lbs. Safe working load: 2,000 lbs.

Stock# 1326525
Heavy-Duty Recessed Rotating Rope Ring rotates a full 360° and is designed to be bolted to a floor or welded to steel. Not designed for lifting. Ultimate breaking strength: 6,000 lbs. Safe working load: 2,000 lbs.

Stock# 1326015
Yellow Zinc Plated Lashing Ring w/Bracket. 1/2"diameter ring is supplied with 2-hole mounting bracket. Forged bracket is 2" wide and 11/16" thick with square mounting holes to accept 3/8" carriage bolts. Ultimate breaking strength: 11,781 lbs. Safe working load: 4,080 lbs.

Stock# 1326455
Forged Steel 5/8" diameter D-ring with 2-1/2"W x 3/8" thick forged bracket welded on a 1/4" steel plate. Bolts to any surface for alternative to welding.

Stock# 1326159
Forged Steel Lashing Ring w/Bracket. 5/8" diameter ring is supplied with weld-on mounting bracket. Forged bracket is 2-1/2" wide and 3/8" thick. Ultimate breaking strength: 18,390 lbs. Safe working load: 6,130 lbs.

Stock# 1326160
Forged Steel Lashing Ring w/Bracket. 1" diameter ring is supplied with weld-on mounting bracket. Forged bracket is 2-1/8" wide and 3/8" thick. Ultimate breaking strength: 46,760 lbs. Safe working load: 15,586 lbs.

Stock# 1326523
Forged Steel Lashing Ring with bracket. Ring is 1" diameter and is formed with a 55 degree angle to extend mounting surface. Ultimate breaking strength: 46,760 lbs. Safe working load: 15,586 lbs.

Stock# 5229144
3/8"-diameter stock. Contains two eye bolts, four washers and four nuts. Zinc-plated steel construction. 2" long with 1"-diameter eye. Provides additional tie-down points on your trailer frame or vehicle.
SUPPLIES LIMITED

Stock# 5229145
Contains two 7/16" diameter stock eye bolts, two lock washers, and two nuts. Zinc-plated steel construction. 1-1/4" long with 5/8"-diameter eye.

Stock# 1326510
Cargo Bed Anchor w/ Removable 3/8" Eye Bolt (pair) can be easily installed to provide an anchor point in a trailer or pick up bed. The eye of the bolt can be removed to provide a flush surface when not in use.

Stock# 1326026
1/2-13 threaded stock, standard shoulder pattern drop forged, heat treated eye bolt. 1-5/16" ring inside diameter.

Stock# 1326027
3/4-10 threaded stock, standard shoulder pattern drop forged, heat treated eye bolt. 1-1/2" ring inside diameter.

Stock# 1622038
Universal S - J Hooks. 100 per pack. Great for use with shock cord or rubber rope.
SUPPLIES LIMITED

Stock# 1622044
These stake pockets are designed for installation in trailer flooring to accept roll-in cart lock pins. They are to be installed using 1/4” diameter fasteners and may be surface or flush mounted. Inside diameter: 1.05   (Sold as each)

Stock# 1326526
BUYERS Aluminum Strap Eye has an inside opening of 2.09" and an inside height of 1.75". It is a perfect lashing point for chain or tie down straps and can be easily installed.

Stock# 1559018
Formed from 3/8" stock steel. 2-hole rope hook easily fastens to trailer platforms or decks for a secure tie-down point.

Stock# 1559062
The double J hook is designed to hold the shock cord or rubber rope in place while the slack is taken up during the tarping process. Weld-on rope hook is manufactured from high quality 5/8" steel round bar.

Stock# 1559059
The J-hook is designed to hold the shock cord or rubber rope in place while the slack is taken up during the tarping process. Weld-on rope hook is manufactured from high quality 5/8" steel round bar.

Stock# 5257109
Hot-dipped galvanized pre-punched bolt-on frame tie down bracket. Bracket measures 4" x 2".

Stock# 5398050
Seattle Sports Quick Loops #078115 is a easy way to add lashing points to your vehicle. Just open your hood or trunk, place where need then close the hood or trunk.