Utility Trailer Jack Parts and Accessories

Stock# 7003233
This replacement handle is intended to fit a CURT marine jack. It allows for easy raising and lowering of the jack post and offers a comfortable grip.

Stock# 5443008
RAM removable foot with bolt measures 2-3/8" wide x 4-5/8" long x 1-1/2" tall.

Stock# 5419248
KARAVAN trailer jack removable foot with bolt measures 2-3/8" wide x 4-5/8" long x 1-1/2" tall.

Stock# 7003192
Add stability and support to your trailer jack and trailer with a CURT jack foot. It measures 1-11/16" tall, has a weight capacity of 2,000 lbs. and is designed for 2" diameter tubes.

Stock# 5443009
RAM removable foot with pin measures 4-3/8" wide x 6-3/8" long x 1-3/4" tall.

Stock# 5443010
RAM removable foot with pin measures 4-3/8" wide x 6-3/8" long x 8-1/2" tall.

Stock# 5443011
RAM wheel caster assembly with a 2" I.D. opening can be added to the bottom of A-Frame jacks. Caster reduces all jack capacities to 1200 lbs.

Stock# 7003191
Add stability and mobility to your trailer jack and trailer with a CURT jack caster. It comes with a 6" poly wheel, has a weight capacity of 1,200 lbs. and is designed for 2" diameter tubes.

Stock# 5419249
KARAVAN wheel caster assembly with a 1.98" I.D. opening can be added to the bottom of A-Frame jacks.

Stock# 5443013
Round tube drop legs are fabricated from high strength, structural steel tubing, and are designed to be a direct replacement for most a-frame and tongue jacks. This 1-3/4" o.d. replacement drop leg can be adjusted up and down in 2" increments. Pin and safety clip included. Zinc coated finish for rust and corrosion resistance.

Stock# 5207087
BULLDOG 2" Square Tube Replacement Drop Leg is rated to replace drop legs in jacks with a 8,000 lb rating.  It is 2" square with 5 mounting holes on 3.5" centers.  Overall length is 18.25" and includes the pin.
SUPPLIES LIMITED

Stock# 5207115
BULLDOG zinc plated lynch pin can be used to secure utility trailer ramp gates, cargo trailer doors and windows.
SUPPLIES LIMITED

Stock# 7003148
This replacement jack handle is intended to fit CURT A-frame jacks #28200, #28202, #28203 and #28250. It allows for easy raising and lowering of the jack post and offers a comfortable grip.

Stock# 5207011
Crank handle with red knob repair kit. Used on BULLDOG / HAMMERBLOW 150, 160 & 170 Series Topwind trailer jacks.
SUPPLIES LIMITED

Stock# 5443015
RAM Crank handle for RAM brand scissor jacks measures 27-14" long. 3/4" Drive.

Stock# 5207014
Teardrop style black knob repair kit. Used on BULLDOG / HAMMERBLOW 139, 159, 170 & 190 Series trailer jacks.
SUPPLIES LIMITED

Stock# 5207016
Red colored knob repair kit. Used on BULLDOG / HAMMERBLOW 150, 160 & 170 Series trailer jacks.
SUPPLIES LIMITED

Stock# 7003149
This replacement handle knob is intended to fit CURT top-wind jacks. It offers a comfortable grip and helps promote easy raising and lowering of the jack post. This replacement jack handle grip comes with a cap nut and washer.

Stock# 7003147
These replacement gears are intended to fit a CURT marine jack and provide smooth raising and lowering of the jack post. The kit includes two gears and two shear pins.

Stock# 5207010Bevel gear and roll pin repair kit. Used on BULLDOG / HAMMERBLOW 190 Series Sidewind trailer jacks.
SUPPLIES LIMITED

Stock# 7003176
This replacement cap is intended to fit a CURT marine jack to keep water and grime out of the internal mechanisms. It is constructed from plastic and comes with a set screw.

Stock# 7155077
TPS Lightweight jack stand for supporting trailers after lifting with a jack. Ideal for 3" wide frames and handles a wide range of applications including small cars, ATV's, UTV's. Max capacity 750lb per jack stand.

Stock# 7003175
Add the Power Swap Auxiliary Cord to your Power Stance jack to equip it with a more convenient, less hassle power source. The Power Swap is a 2-way to 7-way plug that connects your jack right to the power in your tow vehicle.