HYDRASTAR Surge Brake Conversion System, 1000 PSI #381-9065
Stock# 5426016
The Hydrastar Marine Surge Brake Conversion Kit includes everything you will need to convert the outdated surge brake system to an electric over hydraulic trailer brake system. Simply wire the brake actuator, (1000 psi), with the hardware provided, insert the brake line in to the actuator, and say goodbye to your surge brake problems.
The Hydrastar Marine Surge Brake Conversion Kit is the solution to all the problems associated with surge trailer brakes. Unlike surge brakes, which are inertia based hydraulics, Hydrastar gives you all the brake control from inside of the tow vehicle. Never slide down the boat ramp again, and take control of your trailer brakes. This kit consist of everything you will need to convert the outdated surge brake system to an electric over hydraulic trailer brake system. Simply wire the 1000 psi brake actuator with the hardware provided, insert the brake line in to the actuator, and say goodbye to all your surge brake problems.
Kit Includes:
- Hydrastar Marine EOH Actuator (1000 psi)
- Break-Away Battery Kit (Battery with built in charger and break away switch)
- 7-way Trailer Plug
- Junction Box
- 1 – 12 ga Grounding Wire
- 8 – 14 ga Ring Connectors (heat shrink)
- 9 – 12 ga Ring Connectors (heat shrink)
- 1 – 14 ga Butt Connector (heat shrink)
- 1 – 12 ga Butt Connector (heat shrink)
- 6 ft. Wire Loom
- 4 – Adhesive Mounting Pads
- 4 – Self Tapping Screws
| Product Name | HYDRASTAR Surge Brake Conversion System, 1000 PSI #381-9065 |
|---|
