Triple-Light Rear Identification Light Bars

Stock# 1672112
TecNiq Red S52 Fully submersible over 80" ID V-bar features three high-brightness LED lights to make this wide-vehicle identification bar one of the most rugged and cost effective solutions for your marine trailer.
Dimensions: W = 12.89" H = 2.00" D = 0.50"

Stock# 1672111
TecNiq Clear Red S52 Fully submersible over 80" ID V-bar features three high-brightness LED lights to make this wide-vehicle identification bar one of the most rugged and cost effective solutions for your marine trailer.
Dimensions: W = 12.89" H = 2.00" D = 0.50"

Stock# 1672110
TecNiq S51 Fully submersible over 80" ID bar features three high-brightness S18 side markers to make this wide-vehicle identification bar one of the most rugged and cost effective solutions on the market. Exceeding specifications by several times, you can use this light to indicate an over 80 vehicle or for whenever extra visibility is required.
Dimensions: W = 14.465" H = 1.34" D = 0.926"

Stock# 1672109
TecNiq S50 Fully submersible over 80" ID bar features three high-brightness S21 side markers to make this wide-vehicle identification bar one of the most rugged and cost effective solutions on the market. Exceeding specifications by several times, you can use this light to indicate an over 80 vehicle or for whenever extra visibility is required.
Dimensions: W = 14.465" H = 1.34" D = 0.926"

Stock# 1672013
TecNiq T12 is a quality waterproof 15” lamp that can be mounted in unique locations where space is at a premium.
While narrow and thin, it meets FMVSS requirements with a wide angle of bright illumination for maximum safety.
Unlike similar lamps, TecNiq’s light is TRULY vacuum sealed for a lifetime of care free service.
Dimensions: W = 15.52" H = 1.28" D = 0.48"

Stock# 1672012
TecNiq T12 is a quality waterproof 15” lamp that can be mounted in unique locations where space is at a premium.
While narrow and thin, it meets FMVSS requirements with a wide angle of bright illumination for maximum safety.
Unlike similar lamps, TecNiq’s light is TRULY vacuum sealed for a lifetime of care free service.
Dimensions: W = 15.52" H = 1.28" D = 0.48"

Stock# 1672011
TecNiq T12 is a quality waterproof 15” lamp that can be mounted in unique locations where space is at a premium.
While narrow and thin, it meets FMVSS requirements with a wide angle of bright illumination for maximum safety.
Unlike similar lamps, TecNiq’s light is TRULY vacuum sealed for a lifetime of care free service.
Dimensions: W = 15.52" H = 1.28" D = 0.48"

Stock# 7160061
PARAISO waterproof LED light bar for trailers 80" or more in overall width. This light meets FMVSS/CMVSS 108 requirements for vehicles 80" wide or wider. Mounts on 7-1/2" center.
Dimensions:  L = 16"   H = 1-1/2"   D = 1-1/2"

Stock# 5444085
Grote submersible ID bar light for applications over 80" wide. Dimensions:  L = 15-5/8"   H = 1-1/4"   D = 1-3/8"
SUPPLIES LIMITED

Stock# 5005244
Peterson waterproof light bar for trailers 80" or more in overall width.
Dimensions:  L = 14-1/2"   H = 1-1/8"   D = 1"

Stock# 5005245
Peterson waterproof led light bar for trailers 80" or more in overall width.
Dimensions:  L = 14-1/2"   H = 1-1/8"   D = 1"

Stock# 7115184
CARRY-ON submersible ID bar light for over 80" wide applications.
Dimensions:  L = 17"   H = 1-1/2"   D = 1"

Stock# 1294194
OPTRONICS #MCL97RB LED identification bar light for over 80" wide applications with a single wire design.  Dimensions:  L = 14-1/4"   W = 1-3/16"   D = 1-5/16"

Stock# 5419221
KARAVAN identification bar light for over 80" wide applications. Waterproof light capsules are mounted  to a stainless steel housing. 2-wire 74" lead has 2 male bullet type connectors on the end.  Dimensions:  L = 14.25"   W = 1.18"   D = 0.81"

Stock# 1294126
OPTRONICS #MCL84RB sealed 3-piece LED identification light bar for over 80" wide trailer applications. Includes 3 replaceable red lights.
Dimensions:  L = 16-1/2"   H = 1-3/8"   D = 1-5/8"

Stock# 1294193
OPTRONICS #MCL83RB FLEET Count™ LED identification bar light for over 80" wide applications. Contains 3 replaceable AL-90RB lights.
Dimensions:  L = 15-15/16"   W = 1-15/32"   D = 1-5/8"

Stock# 5444083
Grote submersible ID bar light for applications over 80" wide. Dimensions:  L = 17"   H = 1-1/2"   D = 1-1/2"

Stock# 5422170
DRY LAUNCH 3-light identification bar has a waterproof, air-trapping, submersible design that works like inverted water glass. All Tough GE Lexan® Polycarbonate construction. Low profile design with a 42'' pigtail.
Dimensions: 14"W x 1 1/2"H x 3/4"D

Stock# 5421004
VENTURE stainless steel 3-light identification bar for over 80" wide applications. Includes three totally sealed marker lights with pigtail with a waterproof plug end. Identification bar is required for all trailers over 80" wide.
Dimensions:  L = 13-1/4"  Mounting holes are 7-3/4" on center

Stock# 1294357
OPTRONICS 2-position LED identification bar light for over 80" wide applications.
Dimensions:  L = 13.62"   H = 1.18"   D = 1.10"
SUPPLIES LIMITED

Stock# 1492073
Road Warrior 2-position LED identification bar light for over 80" wide applications.
Dimensions:  L = 19-3/4"   H = 2"   D = 1-1/2"

Stock# 5005226
Peterson mfg. 6-diode LED ID bar light for over 80" wide applications.
Dimensions:  L = 16.27" H = 1" W = 1.25"

Stock# 5291248
EZ-LOADER by WESBAR waterproof LED light bar for trailers 80" or more in overall width. Pre-wired, single bullet supply and ring terminal ground, with 60" harness for easy installation.
Dimensions:  L = 20-1/2"   H = 1-1/2"   D = 1"

Stock# 1294195
OPTRONICS #MCL98RB compact LED identification bar light for over 80" wide applications with a two wire design.
Dimensions:  L = 14-1/4"   W = 1-1/8"   D = 7/8"

Stock# 5444084
Grote thin line ID light bar for over 80" applications is only 1-3/8" thick. Features sonically sealed, waterproof lens and housing in a single unit. Dimensions:  W = 15"    H = 1-3/16"   D = 1-3/8"
SUPPLIES LIMITED

Stock# 1294173
OPTRONICS #MCL78RB Thin Line LED red identification bar has 3 super diodes for bright, dependable performance. All-weather molded plastic housing and durable lens protect against corrosion.
Dimensions:  W = 17"    H = 1-3/8"   D = 1"

Stock# 5291236
EZ-LOADER light bar bracket features a galvanized steel construction and allows you to attach a 3 light ID bar on an EZ-Loader brand trailer.
Dimensions:  L = 15-3/4"   H = 2"   D = 1-1/2"
SUPPLIES LIMITED

Stock# 1294174
OPTRONICS #MCL70RB ultra thin line ID light bar for over 80" applications, andonly 5/8" thick. Features sonically sealed, waterproof lens and housing in a single unit. Two-wire design includes both lead and ground wires for mounting to all surfaces.
Dimensions:  W = 15"    H = 5/8"   D = 1-3/8"

Stock# 1660001
CAR MATE slim line ID light bar for over 80" applications is only 1-5/8" tall. Features sonically sealed, waterproof lens and housing in a single unit. Dimensions:  W = 15-1/2"    H = 1-5/8"   D = 3/4"

Stock# 1569190
TRUCK-LITE Model 35® 3-light 17" red LED aluminum identification bar is designed to fit applications requiring minimal space.
Dimensions:  W = 17.00"  H = 1.00"