5 Lug Trailer Wheel Hubs and Hub Kits

Stock# 1041334
LOADRITE short hub kit includes: hub with studs and races, lug nuts, seal (1-1/4" ID) and 1-1/16" bearings. Hub journal length is 3-1/2" thru the center from rear casting edge to front casting edge. (1,350 Lb. Capacity)

Stock# 5500037
'Short Hub' has a hub journal length that is 3-1/2" thru the center from rear casting edge to front casting edge. Hub has 5 on 4-1/2" bolt circle with studs and races only. Short Hub unit will fit 1" or 1-1/16" spindles with optional bearing kits.

Stock# 7125009
Includes: 1 hub, bearings, seal, dust cap, pin & lug nuts. Pre-greased hub is ready to use right out of the package. Cast Iron hub is rated at 1,250 lbs. capacity each.

Stock# 7125038
Kit Includes: 1 hub, bearings, seal, dust cap, pin & lug nuts. GalvX coated premium non rusting hub finish. Pre-greased hub is ready to use right out of the package. 1250 lbs. capacity each.

Stock# 7125061
Includes: (1) hub, bearings, seal, super lube cap, pin & lug nuts. GalvX coated premium non rusting hub finish. Pre-greased hub is ready to use right out of the package. 1,250 lbs. capacity each.

Stock# 5470001
Includes 1 hub, bearings, 1 D washer, 1 tang washer, 1 spindle washer, 1 preinstalled grease seal, super lube cap, cotter pin & lug nuts. Rated at 1,100 lbs. capacity each. MAT galvanized coated premium non rusting hub finish. The hubs are 100% pre-assembled with bearings and grease seal installed and pre-greased with marine grease.

Stock# 7160021
PARAISO Factory pre-greased replacement wheel hub Includes: 1 hub, bearings, seal, dust cap, pin & lug nuts. Pre-greased hub is ready to use right out of the package. Cast Iron hub is rated at 1,000 lbs. capacity per hub.

Stock# 5439228
Includes: 1 hub, bearings, seal, (5) 1/2" Pressed in studs. Pre-greased hub is ready to use right out of the package. Cast Iron hub is rated at 1,100 lbs. capacity per hub.

Stock# 7115025
CARRY-ON 5-lug hub kit includes: 1 hub, bearings, 2 grease seals, dust cap and lug nuts. Cast Iron hub is rated for 1,250 lb. capacity.

Stock# 7125013
Includes: 1 hub, bearings, seal, dust cap, pin & lug nuts. Pre-greased hub is ready to use right out of the package. Cast Iron hub is rated at 1350 lbs. capacity per hub.

Stock# 7125011
Includes: 1 hub, bearings, seal, dust cap, pin & lug nuts. Pre-greased hub is ready to use right out of the package. Cast Iron hub is rated at 1350 lbs. capacity each.

Stock# 5419322
KARAVAN cast Iron hub is rated at 1,350 lbs. capacity per hub. Includes: 1 hub, bearings, seal, dust cap, pin & lug nuts. Pre-greased hub is ready to use right out of the package.

Stock# 5331202
Includes: One cast iron hub rated for 2K axles, two 1-1/16 bearings, grease seal, dust cap and lug nuts.
For use with 8" to 12" wheels only.

Stock# 5331201
Includes: One cast iron hub rated for 2K axles, two 1-1/16 bearings, grease seal, dust cap and lug nuts.
For use with 13" to 15" wheels only.

Stock# 5446252
Includes: One cast iron hub rated for 2K axles, two 1-1/16 bearings, grease seal, dust cap and lug nuts.
For use with 13" to 15" wheels only.
SUPPLIES LIMITED

Stock# 7107010
Includes 1 hub, bearings, double lip grease seal, grease cap, grease cap plug, lug nuts, spindle washer, tang washer, cotter pin, and spindle nut. This Big Tex hub is designed to fit onto most 2k axles.

Stock# 7125256
Vortex hubs are a pre-greased "no touch" lubrication system with Extra Heavy Duty Lucas grease that requires no maintenance for up to 100,000 miles or 6 years. Kit Includes:1 hub, bearings, triple lip spring loaded grease seal, threaded dust cap w/O-ring, external zerk fitting, cotter pin & lug nuts.

Stock# 5446253
Includes: One cast iron hub rated for 2K axles, two 1-1/16 bearings, grease seal, dust cap and lug nuts.
For use with 8" to 12" wheels only.
SUPPLIES LIMITED

Stock# 5428200
Includes 1 hub, inner and outer bearings, grease seal (1.99" O.D. x 1.25" I.D.), EZ lube cap, cotter pin & lug nuts. Rated at 1,250 lbs. capacity each. Galvanized coated premium non rusting hub finish. The wheel bearings and hub cavity are 100% pre-assembled with grease seal installed and pre-greased with Amalie Green Elixer NLGI #2.

Stock# 7125039
Includes: 1 hub, bearings, seal, dust cap, pin & lug nuts. GalvX coated premium non rusting hub finish. Pre-greased hub is ready to use right out of the package. 1350 lbs. capacity each.

Stock# 1041422
LOADRITE - KNOTT Galvanized Trailer Hub has 1-1/16" x 1-1/16" bearings and will work with any standard spindle with removable bearings. 5 Lug unit with a 4.5" Bolt pattern and comes with lug nuts, Knott dust cap, washer, cotter pin, castle nut, and grease seal.

Stock# 7125062
Includes: (1) hub, bearings, seal, super lube cap, pin & lug nuts. GalvX coated premium non rusting hub finish. Pre-greased hub is ready to use right out of the package. 1,350 lbs. capacity each.

Stock# 7107233
Includes: 1 hub, bearings, seal, super lube cap, pin & lug nuts. Galvanized coated premium non rusting hub finish. Pre-greased hub is ready to use right out of the package. 1,000 lbs. capacity each.

Stock# 7125254
Vortex hubs are a pre-greased "no touch" lubrication system with Extra Heavy Duty Lucas grease that requires no maintenance for up to 100,000 miles or 6 years. Kit Includes:1 GalvXL hub, bearings, triple lip spring loaded grease seal, threaded dust cap w/O-ring, external zerk fitting, cotter pin & lug nuts.

Stock# 5291213
EZ-LOADER complete 5-hole oil bath hub kit for axles with short hubs includes hub with races, bearings, seal, washer, nut, retainer nut and cotter pin, screw on bearing protector and lug nuts.  Hub journal length is 3-1/2" thru the center from rear casting edge to front casting edge.

Stock# 5470002
Includes 1 hub, bearings, 1 D washer, 1 tang washer, 1 spindle washer, 1 preinstalled grease seal, super lube cap, cotter pin & lug nuts. Rated at 1,750 lbs. capacity each. MAT galvanized coated premium non rusting hub finish. The hubs are 100% pre-assembled with bearings and grease seal installed and pre-greased with marine grease.

Stock# 7160022
PARAISO Factory pre-greased replacement wheel hub Includes: 1 hub, bearings, seal, dust cap, pin & lug nuts. Pre-greased hub is ready to use right out of the package. Cast Iron hub is rated at 1,750 lbs. capacity per hub.

Stock# 7107011
Includes 1 hub, bearings, double lip grease seal, grease cap, grease cap plug, lug nuts, spindle washer, tang washer, cotter pin, and spindle nut. This Big Tex hub is designed to fit onto most 3.5k axles.

Stock# 7115083
CARRY-ON 5-lug hub kit includes: 1 hub, bearings, grease seal, dust cap and lug nuts. Cast Iron hub is rated for 1,750 lb. capacity.

Stock# 5419321
KARAVAN factory original hub, bearings, seal, dust cap, pins & lug nuts. Pre-greased hub is ready to use right out of the package. Cast Iron hub is rated at 1,750 lbs. capacity each.

Stock# 5331205
One cast iron hub rated for 3.5K axles, bearings, 1.718" ID grease seal, E-Z lube grease cap with rubber plug, lug nuts and spindle nut retainer. Bolt Circle: 5 on 4.5"

Stock# 5331203
Includes: One cast iron hub rated for 3.5K axles, bearings, 1.718 grease seal, standard dust cap and lug nuts.
Bolt Circle: 5 on 4.5"

Stock# 7129199
Includes: One cast iron hub rated for 3.5K axles, bearings, 1.718 grease seal, standard dust cap and lug nuts.
Bolt Circle: 5 on 4.5"
SUPPLIES LIMITED

Stock# 5439229
Includes: 1 hub, bearings, seal, (5) 1/2" Pressed in studs. Pre-greased hub is ready to use right out of the package. Cast Iron hub is rated at 1,750 lbs. capacity per hub.

Stock# 7125056
Vortex hubs are a pre-greased "no touch" lubrication system with Extra Heavy Duty Lucas grease that requires no maintenance for up to 100,000 miles or 6 years. Kit Includes: 1 hub, bearings, triple lip spring loaded grease seal, threaded dust cap w/O-ring, external zerk fitting, cotter pin & lug nuts.

Stock# 5415139
Unpainted UFP hub with studs and races only, fits 1-3/8" x 1-1/16" tapered spindle. 5 on 4-1/2" bolt circle.

Stock# 5331204
Includes: One cast iron hub rated for 3.5K axles, bearings, 1.718 grease seal, standard dust cap and lug nuts.
Bolt Circle: 5 on 4.75"

Stock# 5470003
Includes 1 hub, bearings, 1 D washer, 1 tang washer, 1 spindle washer, 1 preinstalled grease seal, super lube cap, cotter pin & lug nuts. Rated at 1,750 lbs. capacity each. MAT galvanized coated premium non rusting hub finish. The hubs are 100% pre-assembled with bearings and grease seal installed and pre-greased with marine grease.

Stock# 7107012
Includes 1 hub, bearings, double lip grease seal, grease cap, grease cap plug, lug nuts, spindle washer, tang washer, cotter pin, and spindle nut. This Big Tex hub is designed to fit onto most 3.5k axles.

Stock# 5446274
Includes 1 hub, bearings, double lip grease seal, grease cap, and lug nuts. Factory pre-greased replacement wheel hub kits make hub and bearing replacement a snap. This Sirco hub is designed to fit onto most 3.5k axles.

Stock# 5331207
Includes: One cast iron hub rated for 3.5K axles, bearings, 1.718" ID grease seal, standard dust cap and lug nuts. Bolt Circle: 5 on 5.5"

Stock# 7107234
Includes: 1 hub, bearings, seal, super lube cap, pin & lug nuts. Galvanized coated premium non rusting hub finish. Pre-greased hub is ready to use right out of the package.  1,750 lbs. capacity each.

Stock# 5428196
Includes 1 hub, inner and outer bearings, grease seal (2.56" O.D. x 1.719" I.D.), EZ lube cap, cotter pin & lug nuts. Rated at 1,750 lbs. capacity each. The wheel bearings and hub cavity are 100% pre-assembled with grease seal installed and pre-greased with Amalie Green Elixer NLGI #2.

Stock# 5428195
Includes 1 hub, inner and outer bearings, grease seal (2.56" O.D. x 1.687" I.D.), EZ lube cap, cotter pin & lug nuts. Rated at 1,750 lbs. capacity each. Galvanized coated premium non rusting hub finish. The wheel bearings and hub cavity are 100% pre-assembled with grease seal installed and pre-greased with Amalie Green Elixer NLGI #2.

Stock# 7125089
Vortex hubs are a pre-greased "no touch" lubrication system with Extra Heavy Duty Lucas grease that requires no maintenance for up to 100,000 miles or 6 years. Kit Includes:1 GalvXL hub, bearings, triple lip spring loaded grease seal, threaded dust cap w/O-ring, external zerk fitting, cotter pin & lug nuts.

Stock# 7125063
Includes: 1 hub, bearings, seal, super lube cap, pin & lug nuts. GalvX coated premium non rusting hub finish. Pre-greased hub is ready to use right out of the package. 1750 lbs. capacity each.

Stock# 7125014
Includes: 1 hub, bearings, seal, dust cap pin & lug nuts. Pre-greased hub is ready to use right out of the package. Cast Iron hub is rated at 1,750 lbs. capacity each.

Stock# 7125037
Includes: 1 hub, bearings, seal, dust cap pin & lug nuts. GalvX coated premium non rusting hub finish. Pre-greased hub is ready to use right out of the package. 1,750 lbs. capacity each.

Stock# 1041475
LOADRITE - KNOTT Galvanized Trailer Hub has 1-3/8" x 1-1/16" bearings and will work with any standard spindle with removable bearings. 5 Lug unit with a 4.5" Bolt pattern and comes with lug nuts, Knott dust cap, washer, cotter pin, castle nut, and pre-installed grease seal.

Stock# 5291157
EZ-LOADER complete 5-hole oil bath (2005 to present) hub kit for axles with tapered spindles includes hub with races, bearings, seal, washer, nut, retainer nut and cotter pin, screw on bearing protector and lug nuts.

Stock# 1561048
Kit Includes: One Stainless Steel hub with pressed in zinc plated studs and pressed in races.

Stock# 1041502
LOADRITE - KNOTT Galvanized Trailer Hub has 1-3/8" x 1-3/8" bearings and will work with any standard spindle with removable bearings. 5 Lug unit with a 4.5" Bolt pattern and comes with lug nuts, Knott dust cap, washer, cotter pin, castle nut, and grease seal (2.56" x 1.72").

Stock# 5415032
Unpainted UFP hub with studs and races only, fits 1-3/8" straight spindle. 5 on 4-1/2" bolt circle.