Aluminum Fishing Equipment

Stock# 1448002
ANGLERS ALUMINUM Fish-N-Mate bumper mount can hold 4 rods and reels and has a bright anodized aluminum finish. Can be mounted to a flat surface with included hardware. Adapter required for receiver mounting.

Stock# 1448003
ANGLERS ALUMINUM Fish-N-Mate bumper mount can hold 6 rods and reels and has a bright anodized aluminum finish. Can be mounted to a flat surface with included hardware. Adapter required for receiver mounting.
SUPPLIES LIMITED

Stock# 1448028
ANGLERS ALUMINUM Fish-N-Mate receiver mount rod holder can hold up to 6 rods and reels and has a bright anodized aluminum finish. Comes with an 6" vertical adjustable drawbar (3 pin holes on 3" centers) with an anti-rattle device that fits into a 2" receiver.

Stock# 1448022
ANGLERS ALUMINUM Fish-N-Mate bumper mount 6-rod and reel rack with a fold down cooler carrier can hold up to a 54 qt cooler. Can be mounted to a flat surface with included hardware or to a 2" receiver hitch.

Stock# 1448036
ANGLERS ALUMINUM Fish-N-Mate all purpose anodized aluminum hitch mount fishing and utility rack with 250 lbs. recommended max weight. Easy to install into 2" receiver. Holds 8 rods and up to 150 quart capacity cooler.

Stock# 1448004
ANGLERS ALUMINUM Fish-N-Mate adapter kit allows 4 and 6 rod bumper mount rod racks to be mounted to a 2" receiver hitch. Includes mounting hardware.

Stock# 1448020
ANGLERS ALUMINUM Fish-N-Mate adapter kit allows 4 and 6 rod bumper mount rod racks to be mounted to a 2" receiver hitch with a 6" rise. Includes a stabilizer bar for added support.
SUPPLIES LIMITED - 1 left in stock

Stock# 1448025
ANGLERS ALUMINUM Fish-N-Mate adapter kit allows the 6 rod holder with fold down cooler rack (#1448022) to be mounted to a 2" receiver hitch with a 6" rise. Includes a stabilizer bar for added support.

Stock# 1448016
ANGLERS ALUMINUM Surf-Mate® rod cooler rack is constructed of non-corrosive aluminum tube which is light but strong, perfect for carrying your gear. Accommodates Ten (10) rods and (1) 120 qt. cooler.   Inside Frame: 18" x 38"

Stock# 1448015
ANGLERS ALUMINUM Surf-Mate® Jr. rod cooler rack is constructed of non-corrosive aluminum tube which is light but strong, perfect for carrying your gear. Accommodates eight (8) rods and (1) 72 qt. cooler.  Inside Frame: 17" x 30"

Stock# 1448018
ANGLERS ALUMINUM Fish-N-Mate cutting board is made of a high density polyethylene material with a cutting surface of 10-1/2" x 18" that has a convenient knife slot. The cutting board is secured onto the front of the Surf-Mate® or Surf-Mate Jr.®. with a S.S. detent pin.

Stock# 1448017
ANGLERS ALUMINUM Fish-N-Mate bucket holder is a corrosion resistant aluminum tubing construction that fits on one side or both sides of the Surf-Mate® or Surf-Mate Jr.®. Can fit a 5 gallon bait bucket or a small cooler up to 12" x 12".

Stock# 5177170
This 4-pack of Aluminum valve stem caps help prevent tire leaks by protecting valve cores and stems.

Stock# 5177169
This 4 pack of Aluminum valve stem caps help prevent tire leaks by protecting valve cores and stems.

Stock# 1448001
ANGLERS ALUMINUM Fish-N-Mate sand spike is 40-1/2" x 1/8 x 1-1/2" with an anodized aluminum rod holder, spike and a black nylon cap. A foot pad is located 16" from the bottom of the spike for easy entry into the sand. Overall length is 50"

Stock# 1448032
ANGLERS ALUMINUM Fish-N-Mate Jr. surf cart is constructed of non-corrosive aluminum tube, breaks down for those tight loads and weighs only 17 lbs.! Light yet strong and counter-balanced for carrying lots of gear.  Inside Frame: 9" x 14.5" x 34"
SUPPLIES LIMITED

Stock# 1448033
ANGLERS ALUMINUM Fish-N-Mate has corrosion resistant aluminum tubing construction, designed for strength capable of carrying up to 200 lbs. Includes (2) two 'T' stabilizer bars.    Inside Frame: 9" x 16" x 43"

Stock# 1448038
ANGLERS ALUMINUM Fish-N-Mate all purpose 4-wheel fishing cart designed for the beach has corrosion resistant aluminum tubing construction. designed for strength capable of carrying up to 250 lbs.  Inside Frame: 9" x 16" x 43"

Stock# 1448039
ANGLERS ALUMINUM Fish-N-Mate Cart Caddy Mesh Bottom Plate made from corrosion resistant anodized aluminum. Allows for smaller items to be transported securely inside the beach carts. (Will not fit 4-Wheel Cart or JR Models)

Stock# 1448040
ANGLERS ALUMINUM Fish-N-Mate Cart Caddy Smooth Diamond Bottom Plate made from corrosion resistant anodized aluminum. Allows for smaller items to be transported securely inside the beach carts. (Will not fit 4-Wheel Cart or JR Models)

Stock# 1448024
ANGLERS ALUMINUM Fish-N-Mate add on rod tube is a 25" corrosion resistant aluminum tubing constructed with nylon cap that fits the Surf-Mate® or Surf-Mate Jr.®.

Stock# 1448006
Fish-N-Mate nodized aluminum rake for hunting sand fleas. Product consists of a 12" wide basket and 58" long removable handle. A 3/16" D-ring pin and nylon lanyard included to secure handle.

Stock# 1448008
ANGLERS ALUMINUM Fish-N-Mate side mount single rod holder is made of 2" anodized aluminum and has a black nylon cap with cut out for the reel.

Stock# 1448009
ANGLERS ALUMINUM Fish-N-Mate side mount 3-rod holder is made of 2" anodized aluminum and has black nylon caps with cut out for reels.

Stock# 1448010
ANGLERS ALUMINUM Fish-N-Mate side mount 4-rod holder is made of 2" anodized aluminum and has black nylon caps with cut out for reels.

Stock# 1448011
ANGLERS ALUMINUM Fish-N-Mate side mount 6-rod holder is made of 2" anodized aluminum and has a black nylon caps with cut out for reels.

Stock# 1448027
ANGLERS ALUMINUM Fish-N-Mate 30° angle adapter allows the 3, 4 and 6 rod racks to be mounted to boats and truck tool boxes. Includes mounting hardware.

Stock# 5407004
WAHOO Industries Double Rod Holder is made from high quality 60 series aluminum with a bent mounting gimbal that is 15-1/2" H x 1-1/4" D and has two 8-1/2" rod holders welded to it. Designed to slide into pre-existing rod holders and give the fisherman the ability to fish two rods.

Stock# 5407005
WAHOO Industries Triple Rod Holder is made from high quality 60 series aluminum with a bent mounting gimbal that is 18" H x 1-1/4" D and has three 8-1/2" rod holders welded to it. Designed to slide into pre-existing rod holders and give the fisherman the ability to fish three rods.

Stock# 5407012
WAHOO gimbal mount is made from high quality 60 series aluminum with a 3-1/8" mounting plate. Designed to slide into pre-existing rod holders and give the fisherman the ability to mount what they need without drilling holes.