Anti-Sail Kits and Dump Tarp System Parts

Stock# 1326711
Universal application rear bar kit for dump tarp roller assemblies. Fits inside sewn-in rear pocket of the dump tarp. This aluminum bow set measures 98" long. Guide washers slide along top inside wall of the dump body or truck bed extensions. Anti-sail bar keeps rear of tarp secure across entire truck width during transportation.

Stock# 1326710
Universal application rear bar kit for dump tarp roller assemblies. Fits inside sewn-in rear pocket of the dump tarp. Measures 96" Long and it has a powder coated steel finish. Guide washers slide along top inside wall of the dump body or truck bed extensions. Anti-sail bar keeps rear of tarp secure across entire truck width during transportation.
SUPPLIES LIMITED - 2 left in stock

Stock# 1326203
Universal application rear bar kit for dump tarp roller assemblies. Fits inside sewn-in rear pocket of the dump tarp. Guide washers slide along top inside wall of the dump body or truck bed extensions.

Stock# 1326894
BUYERS PRODUCTS dump truck and trailer tarp extruded aluminum roller bar measures 8' in length.
SUPPLIES LIMITED

Stock# 1326385
Dump truck tarp roller kit replacement crank handle assembly. Fits all BUYERS PRODUCTS dump truck and trailer roll tarp assemblies.

Stock# 1326905
Buyers Products roller tarp crank shaft has 18 teeth and is a replacement part for buyers products roller tarp crank arm systems: (part# 5543000, 5543006).
SUPPLIES LIMITED

Stock# 1326903
BUYERS PRODUCTS roller tarp flange bearing has a 3/4" wide hole for the crank arm shaft and was intended to be used with Buyers products brand roller tarp kits.

Stock# 1326907
BUYERS PRODUCTS roller tarp end plate is used to mount the front of a roller tarp to a trailer or dump truck and was intended to be used with Buyers Products brand roller tarp kits.

Stock# T1332150BP
BUYERS PRODUCTS aluminum full top wind deflector is intended to be used on buyers brand tarp roller kits.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# 1326892
BUYERS PRODUCTS dump truck and trailer roller tarp aluminum corner joint measures 6-11/16" in length.

Stock# 1326943
BUYERS PRODUCTS sturdy cast aluminum tarp joints provide extra clearance for the tarp arm assembly. They're ideal for trucks with tall cabs and you can use them with both electric and manual tarp arm kits. Product Common Use: Dump Applications, Electric Tarp Systems, Manual Tarp Systems.
SUPPLIES LIMITED

Stock# 1326944
BUYERS PRODUCTS cast aluminum Tarp Joints provide extra clearance for the tarp arm assembly. They're ideal for trucks with tall cabs and you can use them with both electric and manual tarp arm kits. Product Common Use: Dump Applications, Electric Tarp Systems, Manual Tarp Systems.
SUPPLIES LIMITED

Stock# 1326893
BUYERS PRODUCTS dump truck and trailer roller tarp aluminum Upper and Lower Arm measures 97" in length. Sold as each.

Stock# 1326715
Replacement driver side torsion spring for the BUYERS Underbody Spring Assembly. Includes one torsion spring only.
SUPPLIES LIMITED

Stock# 1326397
The Dump Body Vibrator has 3,500 lbs. of force and frees frozen, sticky and wet material from 8 to 30 cubic yard dumps. Includes mounting kit with 50' 4AWG wire, solenoid, circuit breaker, push-button switch and steel mounting plate with fasteners.
SUPPLIES LIMITED

Stock# 1326744BP
BUYERS PRODUCTS aluminum vibrator mounting kit  is designed to be used with aluminum dump bodies.  The kit comes with a mounting plate and two mounting bolts and washers.

Stock# 1326743BP
Buyers 15 second dump body vibrator timer switch is designed prevent exceeding the 15 second “on” duty cycle of vibrators.  It activates with a spring return, normally open, switch and allows for hand free operation.

Stock# 1326474
BUYERS PRODUCTS Hi-torque, 12V, 900 watt, 60:1 direct drive motor with a 3-1/8" x 3/4" extended output shaft fits a wide range of front to back tarp systems including Donovan™ and Roll-Rite™. Chrome cover included.
SUPPLIES LIMITED

Stock# 1326475
Buyers Products Hi-torque, 12V, 900 watt, 60:1 direct drive motor with a 3-1/8" x 3/4" extended output shaft fits a wide range of front to back tarp systems including Donovan™ and Roll-Rite™. Chrome cover included.
SUPPLIES LIMITED

Stock# 1326489
The Buyers Twist Lock Plunger Pin is used on applications where a self-locking mechanism is needed. They are commonly used on sling arms, wheel lift arms, dump kits, farm implements, wrecker attachments and more. Measures: 5/8" diameter x 3-1/8" tall x 1-1/8" wide.
SUPPLIES LIMITED

Stock# 1326487
BUYERS PRODUCTS 21-Spline Roll Tarp Universal Joint has a zinc plated finish for superior corrosion resistance.
Measurements: 1-1/4R, 3/8PH x 1-3/8"
SUPPLIES LIMITED

Stock# 1326847
BUYERS PRODUCTS 2-position switch with momentary on-off is weatherproof, dust proof, has a single pole and single throw switch.

Stock# 1326481
BUYERS PRODUCTS Universal Flat Coil Dump Tarp System Torsion Spring.
SUPPLIES LIMITED

Stock# 1326400
BUYERS PRODUCTS recessed pan mount protects toggle switch from impacts & accidental activation.
SUPPLIES LIMITED

Stock# 1326881
BUYERS PRODUCTS 30 amp circuit breaker with manual push-to-reset is ideal for cranes, dump hoists, lift gates, plows, spreaders and winches.

Stock# 1326882
BUYERS PRODUCTS 50-amp circuit breaker with manual push-to-reset is ideal for cranes, dump hoists, lift gates, plows, spreaders and winches.

Stock# 1326317
BUYERS PRODUCTS 60 amp circuit breaker with manual push-to-reset is ideal for cranes, dump hoists, lift gates, plows, spreaders and winches.

Stock# 1326483
BUYERS PRODUCTS 60 amp circuit breaker with auto reset is ideal for cranes, dump hoists, lift gates, plows, spreaders and winches.
SUPPLIES LIMITED

Stock# 1326712
BUYERS 1-1/2" Cast steel tarp gudgeon fits 2" pipe. 3/4" Square key replacement. Interchanges w/Shur-Co #1105033
SUPPLIES LIMITED - 2 left in stock

Stock# 1330466BP
BUYERS inspection door with detent is steel and has a zinc chromate primer finish. This is designed to be to be welded into the the dump body tail gate on 1-Ton to super-duty dumps. The bolted on handle is designed so that it can be mounted on either side of the door. Measures 7-1/4"T x 13-3/4"W.

Stock# 1330467BP
BUYERS inspection door with detent is steel and has a zinc chromate primer finish. This is designed to be welded into the the dump body tail gate on medium to heavy class dumps. The bolted on handle is designed so that it can be mounted on either side of the door. Measures 12-3/8"T x 13-1/2"W.