BIG TEX Ramp Gates, Torsion Springs & Gate Hardware

Stock# 7107102
BIG TEX Ramp Gate Round Pipe Plug is designed to plug a pipe with a 2-7/8" diameter opening.  Plug is designed to help protect the inside of exposed tubes as well as reduce any sharp edges from cut tubes.
SUPPLIES LIMITED

Stock# T7107002
BIG TEX heavy duty ramp gate measures 60" x 51" and is designed to mount right on to the appropriate size Big Tex trailer. Although designed to be a replacement ramp for Big Tex trailers this ramp can be used on most trailers, that are the appropriate size, with the correct mounting hardware.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# T7107005
BIG TEX heavy duty ramp gate measures 77" x 51" and is designed to mount right on to the appropriate size Big Tex trailer. Although designed to be a replacement ramp for Big Tex trailers this ramp can be used on most trailers, that are the appropriate size, with the correct mounting hardware.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# T7107216
BIG TEX Hook End Ladder Ramp is designed for heavy duty use on Big Tex trailers but may work on other brands. The ladder ramp is made of high strength steel and painted black for corrosion resistance. The unit measures 15" x 3" x 96" and is sold as a single unit.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# 7107097
BIG TEX Ramp Gate Butt Hinge is used to be a hinge point and measures 2-1/2" x 2-1/2" x 0.089 Gauge.

Stock# 7107131
BIG TEX Formed Steel Hinge Strap with grease fitting is made of .307" thick steel. It is for a weld on application and has an overall length of 3-9/32".

Stock# 7107136
BIG TEX Weld On Hinge Pin with Grease Fitting is made of steel and has a 4-1/2" overall length. It is a 2 piece system with a body diameter of 3/4" and a pin diameter of 1/2".

Stock# 7107107
Plain finish torsion ramp spring with 7/16" diameter. Designed to assist with the lifting of ramps on Big Tex trailers.
Measurements: Outside of Legs : 15-3/4"  Leg Length: 11-1/4"  Non-Compressed Coil I.D.: 1-3/4" For 1-1/2" Tube

Stock# 7107116
BIG TEX plain finish left hand torsion ramp spring with perpendicular legs is designed for a shaft no larger in diameter then 3/4".

Stock# 7107117
BIG TEX plain finish right hand torsion ramp spring with perpendicular legs is designed for a shaft no larger in diameter then 3/4".

Stock# 7107108
BIG TEX plain finish left hand torsion ramp spring with 90 degree leg angle is designed for a shaft no larger in diameter then 1-1/2".

Stock# 7107109
Big Tex plain finish right hand torsion ramp spring with 90 degree leg angle is designed for a shaft no larger in diameter then 1-1/2".

Stock# 7107111
BIG TEX plain finish left hand torsion ramp spring with 180 degree leg angle is designed for a shaft no larger in diameter then 1-1/2".

Stock# 7107110
BIG TEX plain finish right hand torsion ramp spring with 180 degree leg angle is designed for a shaft no larger in diameter then 1-1/2".

Stock# 7107112
BIG TEX plain finish left hand torsion ramp spring with 180 degree leg angle is designed for a shaft no larger in diameter then 2".

Stock# 7107113
BIG TEX plain finish right hand torsion ramp spring with 180 degree leg angle is designed for a shaft no larger in diameter then 2".

Stock# 7107094
BIG TEX Ramp Gate Pin with Threaded Shank is used to help secure ramp gate. Measures 7/8" x 1-1/8" Usable length, 9/16" x 1-1/2" Threaded shank, Hole for 7/16" diameter pin.

Stock# 7107093
Big Tex Yellow zinc plated lynch pin with 10" lanyard, commonly found on Big Tex trailers, can be used to secure utility trailer ramp gates, cargo trailer doors and windows.

Stock# 7107091
BIG TEX Ramp Gate Mounting Pipe Hinge is used to be a hinge point and measures 6" long with a 3/4" I.D.

Stock# 7107095
BIG TEX Ramp Gate Mounting Pipe Hinge gasket/washer is used at hinge point on the hinge pipe to reduce friction. It measures 1-3/8" OD x 13/16" ID by 3/16" thick.

Stock# 7107092
BIG TEX Ramp Gate latch bracket is used to latch a gate closed and it measures 3/16" x 2-1/2" x 2-1/2"

Stock# 7107009
Big Tex heavy duty ramp gate mounting hardware kit is used to install a ramp gate to a trailer.  One kit is required per ramp gate.