Boat Trailer Bunk Brackets and Hardware

Stock# 5419183
KARAVAN Adjustable Galvanized Flat Bunk Bracket is designed to support boat trailer bunk boards. The 5 mounting holes are for vertical adjustment with one 9/16" mounting hole.

Stock# 5291200
EZ-LOADER galvanized upright supports brackets for both bunk and roll trailers with 3" wide cross-members and is 9" tall.

Stock# 5291201
EZ-LOADER galvanized upright supports brackets for both bunk and roll trailers with 3" wide cross-members and is 12" tall.

Stock# 1041380
LOADRITE Galvanized Side Guide Bracket is at a 90° and measures 1-1/2" x 1-1/2" square. The long side is 33" and the shorter side is 26" and it is used on 5 Starr trailers to support the guides.

Stock# 1041381
LOADRITE galvanized side guide brackets are formed at a 105° and measure 1-1/2" x 1-1/2" square each. The long side is 33" and the shorter side is 26" and it is used on 5-Starr trailers to support the guides.

Stock# 1041382
LOADRITE Galvanized Side Guide Bracket is designed for use with the 105° 1-1/2" x 1-1/2" square side guide on 5 Starr trailers.

Stock# 1041374
Right Hand galvanized steel bunk 'Billy' mounting bracket bolts to crossbar at angle need for bunk board. Total Length of Bracket is 12.25".

Stock# 1041373
Left Hand galvanized steel bunk 'Billy' mounting bracket bolts to crossbar at angle need for bunk board. Total Length of Bracket is 12.25".

Stock# 1041342
LOADRITE light-duty Left Hand galvanized steel bunk 'Billy' mounting bracket bolts to crossbar at angle need for bunk board.

Stock# 1041343
LOADRITE light-duty Right Hand galvanized steel bunk 'Billy' mounting bracket bolts to crossbar at angle need for bunk board.

Stock# 1041345
Galvanized Bunk Bracket Posi-Lock for 2" crossbar is designed to add support to your bunk brackets. Bracket is designed to accept 7/16" U-bolts.

Stock# 1041346
LOADRITE galvanized bunk bracket Posi-Lock for 3" crossbar is designed to add support to your bunk brackets. Bracket is designed to accept 7/16" U-bolts.

Stock# 7102004
TRITON Aluminum Adjustable Bunk Mounting Bracket comes with the bracket and the bottom mounting screw. This bracket mounts directly into an existing channel on the cross member.

Stock# 7102148
TRITON Aluminum Bunk Mounting Bracket. Two of these brackets, one mounting to bottom of bunk and the other mounted to the crossbar, are to be used to mount the bunk (sharing one connecting bolt).

Stock# 7102003
TRITON Aluminum Bunk Mounting Bracket comes with the bracket, 5" connecting bolt, nut, and washer.

Stock# 5419009
KARAVAN aluminum bunk bracket for 2" x 3" cross members. Measures 6.08" overall and 5.50" to the center of the mounting hole.

Stock# 5419010
KARAVAN trailer aluminum bunk bracket for 2" x 3" cross members. Measures 7.08" overall and 6.50" to the center of the mounting hole.

Stock# 5419008
KARAVAN aluminum bunk bracket for 3" x 3" cross members. Measures 7.08" overall and 6.50" to the center of the mounting hole.

Stock# 5419007
KARAVAN aluminum bunk bracket for 3" x 3" cross members. Measures 8.08" overall and 7.50" to the center of the mounting hole.

Stock# 5419095
KARAVAN Galvanized Bunk Bracket is designed to support boat trailer bunk boards. The one long slots and 4 round holes are for vertical adjustment. Attach to cross-member with hex bolts or u-bolts.

Stock# 5419096
KARAVAN Galvanized Bunk Bracket is designed to support boat trailer bunk boards. The multiple mounting holes are for vertical adjustment while the oval hole in the bottom offers minor horizontal adjustment. Attach to cross-member with hex bolts or u-bolts.

Stock# 5419099
KARAVAN Right Handed Galvanized Bunk Brackets for straight crossbars are most commonly found on PWC trailers. The bunk supports are designed to be bolted to the crossbar with the bottom 4 holes. The top four holes allow the angle bracket (not included) to be mounted at the optimum height for the PWC and trailer.

Stock# 5419313
KARAVAN Right Handed Black Painted Bunk Brackets for straight crossbars are most commonly found on PWC trailers. The bunk supports are designed to be bolted to the crossbar with the bottom 4 holes. The top four holes allow the angle bracket (not included) to be mounted at the optimum height for the PWC and trailer.

Stock# 5419098
KARAVAN Left Handed Galvanized Bunk Brackets for straight crossbars are most commonly found on PWC trailers. The bunk supports are designed to be bolted to the crossbar with the bottom 4 holes. The top four holes allow the angle bracket (not included) to be mounted at the optimum height for the PWC and trailer.

Stock# 5419182
KARAVAN Left Handed Black Textured Bunk Brackets for straight crossbars are most commonly found on PWC trailers. The bunk supports are designed to be bolted to the crossbar with the bottom 4 holes. The top four holes allow the angle bracket (not included) to be mounted at the optimum height for the PWC and trailer.

Stock# 5419087
KARAVAN bunk support tube is 10" long and is 1.25" x 1.25" square.  The tube is zinc plate for corrosion resistance.

Stock# 5419251
KARAVAN aluminum bunk bracket measures 3" x 1.5" with 7/16" mounting holes.

Stock# 5419252
KARAVAN aluminum pivot bracket measures 1.31" x 0.806" with a 0.403" mounting hole.

Stock# 5419253
KARAVAN aluminum pivot bracket measures 2.90" x 1.938" with a 0.406" mounting hole.

Stock# 5419185
KARAVAN zinc plated steel bunk pivot support bracket is constructed with 10 gauge steel, is 2.212" tall, and has 5/16" mounting holes.

Stock# 5419184
KARAVAN adjustable zinc plated steel bunk pivot support bracket is constructed with 10 g.a. steel, is 2.331" tall, and has 5/16" mounting holes.

Stock# 5419188
KARAVAN Bunk Channel Bracket is zinc plated and was designed to support boat trailer bunk boards. Attach to cross-member with hex bolts or u-bolts.

Stock# 5419194
KARAVAN Bunk Channel Bracket is galvanized steel and is designed to support boat trailer bunk boards. Attach to cross-member with hex bolts or u-bolts.

Stock# 5419199
KARAVAN galvanized steel guide on support bracket measures 6-5/8" x 4" x 1/4" and is used to support vertical guide-on brackets.

Stock# 5419179
Aluminum extruded tongue stand bracket commonly found on Karavan trailers with 3" swing-away tongues.

Stock# 5422102
SHORELAND'R factory O.E.M. adjustable bunk bracket with mounting hardware for 2" x 3" crossbars. Bracket has a galvanized steel finish, measures 8-1/2" in length and has 11 holes for adjustment.

Stock# 5422103
SHORELAND'R factory O.E.M. adjustable bunk bracket with mounting hardware for 2" x 3" crossbars. Bracket has a white painted finish, measures 8-1/2" in length and has 11 holes for adjustment.

Stock# 5422104
SHORELAND'R factory O.E.M. adjustable bunk bracket with mounting hardware for 2" x 3" crossbars. Bracket has a black painted finish, measures 8-1/2" in length and has 11 holes for adjustment.

Stock# 5422263
SHORELAND'R factory O.E.M. adjustable bunk bracket for 2" x 3" crossbars. Bracket has a galvanized steel finish, measures 11" in length and has 15 holes for adjustment. Bracket only.

Stock# 5422176
SHORELAND'R galvanized steel bunk mounting bracket accepts 2" x 4" bunks. Bracket is 1/8" thick x 3-1/2" I.D.

Stock# 5422284
SHORELAND'R galvanized steel bunk mounting bracket accepts 2" x 6" bunks. Bracket is 1/8" thick x 5-1/2" I.D.

Stock# 5422175
SHORELAND'R galvanized steel bunk mounting bracket mounts directly to trailer crossbar. The bracket has oval shaped mounting holes on bottom for adjustability. All mounting holes accept a 3/8" bolt.

Stock# 5422177
SHORELAND'R galvanized steel bunk mounting front bracket mounts directly to trailer crossbar towards the front of the trailer. The bracket is designed for the front of the trailer. All mounting holes accept a 3/8" bolt except the hole in the bottom corner which accepts 1/2" bolt.

Stock# 5422265
The ShoreLand'r galvanized steel bunk clamp bracket is 1/8" thick, 3-1/8" inside notch to inside notch. Mounting holes are 3/8" and are 2-1/8" on center.

Stock# 5422268
SHORELAND'R galvanized keel cradle bracket mounts directly to trailer crossbar. Typically used to attach bunk and/or roller assemblies to the trailer. All mounting holes accept a 3/8" bolt.

Stock# 5422281
SHORELAND'R galvanized steel adjustable channel bracket mounts directly to the trailer crossbar for use with Shoreland'r bunk support systems.

Stock# 5256356
TIEDOWN Wobble Roller Bracket Mounting Kit features a pair of 5-1/4" wide by 4-3/4" tall galvanized brackets that allow for pivoting of bunk boards or roller assemblies. Comes with 5" x 1/2" bolt with nut and 2 washers.

Stock# 1041375
LOADRITE 1/2" x 5-1/2" Wide x 4" Long cadmium plated u-bolt for mounting Bunk Brackets or other frame components. (locknuts not included)

Stock# 1348063
Galvanized hex head lag bolt (3/8" x 1-1/2") is ideally sized for attaching bunk brackets to 2x4 or 2x6 carpeted lumber used for boat trailer bunk supports. Sold as Each.

Stock# 5229234
ATTWOOD 8" wide by 12' long roll of durable weather-resistant polypropylene marine carpet material. Carpet is easy to cut and custom fit to your application. Attach boat trailer bunk carpet with staples.

Stock# 5229235
ATTWOOD 12" wide by 12' long roll of durable weather-resistant polypropylene marine carpet material. Carpet is easy to cut and custom fit to your application. Attach boat trailer bunk carpet with staples.

Stock# 5212111
CE SMITH 18" wide by 18' long roll of high quality and weather resistant marine grade 16.1 oz carpet features a durable backing and minimal water retention. The velvet finish resist small rocks, mud and washes off clean each time boat trailer is backed into the water. Attach boat trailer bunk carpet to 3" x 8" or 4" x 8" bunks with staples.

Stock# 5212131
CE SMITH 11" wide by 12' long roll of high quality and weather resistant marine grade 16.1 oz carpet features a durable backing and minimal water retention. The velvet finish resist small rocks, mud and washes off clean each time boat trailer is backed into the water. Attach boat trailer bunk carpet to 2" x 6" or 3" x 8" bunks with staples.

Stock# 5212135
CE SMITH 11" wide by 150' long roll of high quality and weather resistant marine grade 16.1 oz carpet features a durable backing and minimal water retention. The velvet finish resist small rocks, mud and washes off clean each time boat trailer is backed into the water. Attach boat trailer bunk carpet to 2" x 6" or 3" x 8" bunks with staples.

Stock# 5212132
CE SMITH 18" wide by 150' long roll of high quality and weather resistant marine grade 16.1 oz carpet features a durable backing and minimal water retention. The velvet finish resist small rocks, mud and washes off clean each time boat trailer is backed into the water. Attach boat trailer bunk carpet to 3" x 8" or 4" x 8" bunks with staples.

Stock# 5212130
CE SMITH 11" wide by 12' long roll of high quality and weather resistant marine grade 16.1 oz carpet features a durable backing and minimal water retention. The velvet finish resist small rocks, mud and washes off clean each time boat trailer is backed into the water. Attach boat trailer bunk carpet to 2" x 6" or 3" x 8" bunks with staples.

Stock# 5212169
CE SMITH 11" wide by 12' long roll of high quality and weather resistant marine grade 16.1 oz carpet features a durable backing and minimal water retention. Attach boat trailer bunk carpet to 2" x 6" or 3" x 8" bunks with staples.

Stock# 5212129
18" wide by 18' long roll of high quality and weather resistant marine grade 16.1 oz carpet features a durable backing and minimal water retention. The velvet finish resist small rocks, mud and washes off clean each time boat trailer is backed into the water. Attach boat trailer bunk carpet to 3" x 8" or 4" x 8" bunks with staples.