Boat Trailer Roller Brackets and Hardware

Stock# 1041518
LOADRITE aluminum pivot bar bracket measures 4.57" high and has 5/8" holes. For use with 2" wide pivot bars on LoadRite Wobble Roller assemblies.

Stock# 1041349
LOADRITE 5.07" x 4.81" tall galvanized 90° bracket allows for pivoting of bunk boards or roller assemblies. Bottom mounting holes are on 3-3/8" centers for a 3" crossbar.

Stock# 1041371
LOADRITE 1.25" roller support bracket is a factory OEM part that is constructed with heavy duty aluminum. Sold as each. Mounting hardware not included.

Stock# 5291186
EZ-LOADER galvanized pivot bar mounting plate is attached to the cross-member with u-bolts and the pivot bar is sandwiched between two of these plates using 1/2" x 3-1/2" bolts. Sold as each.

Stock# 5291187
EZ-LOADER galvanized pivot bar mounting plate attaches to the cross-member and holds the front and rear cross-member that attach the roll system on larger trailers. Measures 7" and hast three height adjustment holes. Sold as each.

Stock# 5257042
5.125" wide by 4.75" tall galvanized bracket allows for pivoting of bunk boards or roller assemblies. Upper or lower holes can be fitted with a bolt to act as a pivot stop.

Stock# 5428160
MAGIC TILT 5-1/2" x 3"  tall galvanized 90° bracket allows for pivoting of bunk boards or roller assemblies. Bottom mounting holes are on 3.5" centers. Sold as 'each', mounting hardware not included.

Stock# 5291170
EZ-LOADER mounting bracket for bunks boards and Double or Single roller arm assemblies. This mounting bracket will allow the bunk/roller arm to pivot as needed. Holes = 3/8"

Stock# 1041391
1" long Mounting Bracket is required for mounting some LoadRite Pivot Roller assemblies. For I-Beam to U-Bar.

Stock# 1041032
4-3/4" long x 1-3/4" wide pivot bar for 2 and 4 wheel LoadRite Wobble Roller assemblies. Replacement aluminum pivot bar bolts to bottom of wobble roller assembly and pivots on bearing pad.

Stock# 5419045
KARAVAN 6" long x 3" wide pivot bar support for boat trailer wobble roller assemblies. Aluminum pivot bar bolts to bottom of wobble roller assembly and pivots on bearing pad.

Stock# 5291103
EZ-LOADER 6-7/8" long x 2-3/4" wide galvanized wobble roller rocker plate. Plate rests on nylon glide (not included).

Stock# 5454049
2-3/4" long bearing pad is required for mounting SeaLion / TideWater Wobble Roller assemblies to flat frame surface.

Stock# 1041025
2-7/8" long bearing pad is required for mounting LOADRITE Wobble Roller assemblies to flat frame surface.

Stock# 1041173
1.69" long bearing pad is required for mounting LoadRite Wobble Roller assemblies to flat frame surface.

Stock# 5291033
3" long x 1-3/8" wide poly slide wedge fits EZ-LOADER roller arm assemblies. Flat bottom and concave top.

Stock# 5419046
3.00" long x 1.375" wide aluminum wobble roller pivot seat is used when mounting KARAVAN wobble roller assemblies to flat frame surfaces.

Stock# 1041369
5/16" x .78" Wide x 1.56" Long zinc plated u-bolt for LoadRite wobble roller assemblies. (locknuts not included)

Stock# 1041012
3/8" x 1-1/2" Wide x 2-1/8" Long cadmium plated u-bolt for LoadRite Dual-Roller wobble roller assemblies.

Stock# 1041034
3/8" x 1.31" Wide x 2-3/4" Long cadmium plated u-bolt for LoadRite Quad-Roller wobble roller assemblies

Stock# 1041035
1/2" x 1.78" Wide x 4-1/2" Long stainless steel u-bolt for LoadRite wobble roller Pivot Bar assemblies.

Stock# 5291100
EZ-LOADER 1-3/4" long x 1" O.D. x 3/4" I.D. spacer bushing for quad roller assembly.

Stock# 5291234
EZ-LOADER boat trailer 1/2" x 3" x 1-1/4" bunk bracket retaining u-bolt. Mounting hardware sold separately.

Stock# 5291159
EZ-LOADER boat trailer 3/8" x 3/4" x 2" u- bolt. Mounting hardware sold separately.

Stock# 5291200
EZ-LOADER galvanized upright supports brackets for both bunk and roll trailers with 3" wide cross-members and is 9" tall.

Stock# 5291201
EZ-LOADER galvanized upright supports brackets for both bunk and roll trailers with 3" wide cross-members and is 12" tall.

Stock# 5291160
EZ-LOADER boat trailer 3-1/2" x 2-1/4" roller bracket retaining plate. Used with EZ-Loader u-bolt #290-021938 (Sku #5291159) to attach roller assemblies. Mounting hardware and u-bolt sold separately.

Stock# 5291105
EZ-LOADER plated mounting strap and bolt kit attaches Quad-Roller assembly to pivot bar.

Stock# 5419006
KARAVAN universal steel roller bar bracket measures 1-1/2" x 1-1/2" and is commonly found on many Karavan trailers.

Stock# 5421033
Molded plastic roller blocks used on VENTURE boat trailers. Sold in pairs. One left and one right.

Stock# 5421034
Roller block strap is commonly used on Venture roller trailers. Measures 3"

Stock# 5421052
Molded PVC wobble roller pivot saddle. Mounting holes on 2-1/4" centers. Factory OEM component used on Venture Boat Trailers.

Stock# 5421053
Molded plastic slide fits between wobble roller shaft and pivot saddle. 7/8" wide x 3-1/4" long. (1) slide required per shaft.
VENTURE component used by Venture Boat Trailers and many other trailer companies.

Stock# 5256103
Hot Dipped Galvanized Square U-Bolts for mounting wobble roller shaft/pivot saddle to trailer. 3/8-16 x 1.63" x 3.7" u-bolts.

Stock# 5422168
Molded plastic swivel block used on SHORELAND'R roller trailers.
Diameter: 2-5/8"    Width: 1-3/4"

Stock# 5421079
Molded PVC wobble roller pivot saddle insert. To be used with pivot saddle 45005.
Factory OEM component used on Venture Boat Trailers.

Stock# 5291123
EZ-LOADER Galvanized steel bunk/roller mounting tray bolts to support brackets to attach bunk or roller assemblies and set proper angle. Bracket measures 4" wide x 30" long.

Stock# 5422140
Replacement galvanized spacer bushing for Shoreland'r smooth wobble rollers.
Accepts 3/4" shafts and measures 1-1/2" long.

Stock# 5419081
KARAVAN cross tube for tandem bunk trailers that use a tandem bunk set up on a roller pivot bar. The cross tube is the tube that connects the two bunks together and then to the roller beam tube.