Boat and Motor Zinc Anodes

Stock# 5247018
Streamlined zinc fits on the propeller shaft of inboard motors and helps combat electrolysis.
Specifications:  .75" Shaft, 2.05" O.D., 2" Width, 2 Mounting Holes

Stock# 5247033
Streamlined zinc fits on the propeller shaft of inboard motors and helps combat electrolysis.
Specifications: 1" Shaft, 2.2" O.D., 2.2" Width, 2 Mounting Holes

Stock# 5247001
Streamlined zinc fits on the propeller shaft of inboard motors and helps combat electrolysis.
Specifications: 1.25" Shaft, 2.44" O.D., 2.47 Width, 2 Mounting Holes

Stock# 5247019
Streamlined zinc fits on the propeller shaft of inboard motors and helps combat electrolysis.
Specifications: 1.375" Shaft, 2.62" O.D., 2.60" Width, 4 Mounting Holes

Stock# 5247002
Streamlined zinc fits on the propeller shaft of inboard motors and helps combat electrolysis.
Specifications: 1.50" Shaft, 2.6" O.D., 2.62" Width, 4 Mounting Holes

Stock# 5247003
Streamlined zinc fits on the propeller shaft of inboard motors and helps combat electrolysis.
Specifications:  1.75" Shaft, 3.25" O.D., 3.1" Width, 4 Mounting Holes

Stock# 5247024
Streamlined zinc fits on the propeller shaft of inboard motors and helps combat electrolysis.
Specifications:  2" Shaft, 3-1/4" O.D., 2-7/8" Width, 4 Mounting Holes

Stock# 5247011
Pencil zinc has a brass fitting that screws into the heat exchange on the motor and helps combat electrolysis.
Specifications: 3/8" Diameter, 1-3/4" Length w/o Threads

Stock# 5247012
Pencil zinc has a brass fitting that screws into the heat exchange on the motor and helps combat electrolysis.
Specifications:  1/2" Diameter, 2" Length w/o Threads

Stock# 5247014
Pencil zinc has a brass fitting that screws into the heat exchange on the motor and helps combat electrolysis.
Specifications:  5/8" Diameter, 2" Length w/o Threads

Stock# 5247025
Rudder Button is a two piece zinc that goes on each side of the rudder and helps combat electrolysis.
Specifications: 1-7/8" Diameter

Stock# 5247026
Rudder Button is a two piece zinc that goes on each side of the rudder and helps combat electrolysis.
Specifications: 2-3/4" Diameter

Stock# 5247021
Rudder Button is a two piece zinc that goes on each side of the rudder and helps combat electrolysis.
Specifications: 4" Diameter

Stock# 5247004
5" Diameter Rudder Button is a two piece zinc that goes on each side of the rudder and helps combat electrolysis.

Stock# 5247022
Small Teardrop zinc anode with 2-hole bolt on design helps combat electrolysis. Recommended for strapping to the rudder or hull of small to medium size vessels.   Specifications: 3-1/2" L x 1-3/4" W x 5/8" D

Stock# 5247007
Trim Tab Zinc screws onto Mercury motors and helps combat electrolysis.
Specifications:   3.6" Diameter and 3/8" Screw Hole

Stock# 5247038
Trim Tab Zinc with no fin screws onto Mercury motors and helps combat electrolysis.
Specifications: 3.6" Diameter and 3/8" Screw Hole

Stock# 5247023
Mercruiser Alpha Block Zinc is to be screwed onto Mercury motors to help combat electrolysis.
Specifications:  3-3/8" x 3" x 1-1/2"

Stock# 5247042
Mercruiser Outdrive gimbal housing zinc anode helps combat electrolysis. 2-Bolt hole mounting design.
Specifications: 2-1/2" L x 2-1/2" W x 3/8" D

Stock# 5247040
Mercruiser Outdrive skeg zinc anode helps combat electrolysis. Single 7/16"-14 threaded hole mount.
Specifications: 3.6" Diameter x 3.3" Height

Stock# 5247039
Mercruiser Bravo Outdrive lift-ram zinc anode helps combat electrolysis. 2-bolt mounting design.
Specifications: 1-7/8" Diameter x 2" Long

Stock# 5247035
Mercruiser Alpha One Outdrive lift-ram zinc anode helps combat electrolysis. 2-bolt mounting design.
Specifications: 1.9" Diameter x 1/2" Long

Stock# 5247063
OMC / Johnson / Evinrude small 'ice cube' zinc anode helps combat electrolysis.
Specifications: 1-5/8" L x 1-1/2" W x 1" D

Stock# 5247058
Transom Bar Zinc bolts to Yamaha motor brackets to help combat electrolysis.
Specifications: 7-7/8" L x 1-3/4" W x 2" H and 7" Hole Center

Stock# 5247073
Solid Plate Hull Zinc is to be mounted onto the hull to protect combat electrolysis.
Specifications: 12"L x 6"W x 5/8"H

Stock# 5247072
Hull Zinc is to be bolted onto the hull to protect from electrolysis.
Specifications: 8-5/8"L x 4-3/8"W x 1-1/2"H and 5" Bolt Holes

Stock# 5247009
Pacemaker Boats oval bonding zinc anode with 1-hole bolt on design helps combat electrolysis.
Specifications: 8.8" L x 3.375" W x 0.75" D