BRI-MAR O.E.M. Dump Trailer Parts

Stock# T7110112
BRI-MAR Complete Barn Door Gate Kit for 6' wide LP and LE series Bri-mar dump trailers. Measures 76" W x 22" H. The barn door gate kit is a factory replacement unit that fits on your 6' wide Bri-Mar Dump Trailer.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# T7110113
BRI-MAR Complete Barn Door Gate Kit for 7' wide LP and LPHD series Bri-Mar dump trailers.  Measures.86" W x 22" H. The barn door gate kit is a factory replacement unit that fits on your 7' wide Bri-Mar Dump Trailer.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# 7110124
BRI-MAR Solid Ramp is designed for CH series trailers. The ramp is a factory replacement unit that measures 63" L x 12-3/4" W and is sold as a single unit.

Stock# 7110117
BRI-MAR Heavy Duty Left Hand Side Barn Door gate fits 7' wide Bri-mar trailers and measures 21" H x 43" W to the mounts. The barn door gate is a factory replacement unit that fits on your 7' wide Bri-Mar Trailer. (Left side only)

Stock# 7110114
BRI-MAR Heavy Duty Right Hand Side Barn Door gate fits 6' wide Bri-mar trailers and measures 21" H x 37" W to the mounts. The barn door gate is a factory replacement unit that fits on your 6' wide Bri-Mar Trailer. (Right side only)

Stock# 7110115
BRI-MAR Heavy Duty Left Hand Side Barn Door gate fits 6' wide Bri-mar trailers and measures 21" H x 37" W to the mounts. The barn door gate is a factory replacement unit that fits on your 6' wide Bri-Mar Trailer. (Left side only)

Stock# 7110116
BRI-MAR Heavy Duty Right Hand Side Barn Door gate fits 7' wide Bri-Mar trailers and measures 21" H x 43" W to the mounts. The barn door gate is a factory replacement unit that fits on your 7' wide Bri-Mar Trailer. (Right side only)

Stock# 7110021
BRI-MAR Sidewind Direct Bolt Trailer Jack with mounting plate has a support capacity of 12,000 lbs and a 10,000 lb. lift capacity. It is designed to fit on LPHD8 series trailers.

Stock# 7110111
BRI-MAR 1/2" Spring Latch allows the assembly to be locked in the open position. Turning the lever allows the bolt to close under spring pressure. This latch has a 3-1/2" long handle and when pin is closed there is 1" of pin exposed out of bracket.

Stock# 7110118
BRI-MAR 1/2" Universal Door Hold Back Assembly is not side specific. Latch can be switched for use on either Left or Right hand side buy removing the retainer pin and switching the 1/2" pin to the other side.

Stock# 7110022
BRI-MAR Sidewind Direct Bolt Trailer Jack with mounting plate has a support capacity of 12,000 lbs and a 10,000 lb. lift capacity. It is designed to fit on EH8, and HT8 series trailers.

Stock# 7110019
BRI-MAR Sidewind Direct Bolt Trailer Jack with mounting plate has a support capacity of 8,000 lbs and a 7,000 lb. lift capacity. It is designed to adapt to both Dump and Flatbed trailers.

Stock# 7110026
BRI-MAR Trailer Safety Chain with slip hook and 1/4" diameter links with an overall length of 36". The safety chain is a GR70 and sold as a single unit rated to be used as a pair on trailers form 7K to 12K.
SUPPLIES LIMITED

Stock# 7110041
BRI-MAR Steel Trailer Tongue Toolbox/Pump Box is designed to mount to the front of A-frame style BRI-MAR trailer. This toolbox/ pump box has pre-welded mounting brackets inside for a battery and holes in the box for wiring or hydraulic hoses. Measures 36.5" Wide x 19" Deep x 12.5" High

Stock# 7110043
BRI-MAR Gas Spring for Pump Box is designed to aid in opening and closing the pump box on BRI-MAR trailers made before January 2014.
Extended Length: 20"  Force: 29 lbs.  Stroke: 8"

Stock# 7110126
BRI-MAR 42" ramp strap for EH series trailers is designed to help hold the ramp in the vertical position. The strap has a 42" over all length with a 40-1" hole center on the larger holes and a 37-1/2" center on the smaller holes.

Stock# 7110128
BRI-MAR Dump Trailer Tarp and Hardware kit easily secures to your trailer and will work on any 6' wide BRI-MAR dump trailer. Tarps are quality constructed to meet the rigors of over-the-road hauling for industrial, farm and home use. Tarp Housing is diamond plated aluminum with stamped BRI-MAR logo plate mounted to the front.

Stock# 7110129
BRI-MAR Dump Trailer Tarp and Hardware kit easily secures to your trailer and will work on any 7' wide BRI-MAR dump trailer. Tarps are quality constructed to meet the rigors of over-the-road hauling for industrial, farm and home use. Tarp Housing is diamond plated aluminum with stamped BRI-MAR logo plate mounted to the front.

Stock# 7110145
BRI-MAR bumper is designed to cushion between the frame and the bed. the bumper measures 1" high x 2-1/2" diameter and it has a .43" mounting hole. Commonly found on BRI-MAR trailers 2015 or newer.

Stock# 7110015
BRI-MAR Fender Knob for Car Hauler Model Trailers are designed to secure the fender to the trailer. They make them removable with this knob to allow for more space for a car door to open and close while loaded on the trailer.

Stock# 7110042
BRI-MAR Locking Pump Box Paddle Latch includes two keys. Direct replacement for existing Bri-Mar pump box latches. Mounting hardware is not included.

Stock# 7110109
BRI-MAR Lower Vertical Tailgate Pin for dump trailer gates. This pin is 1/2" in diameter.

Stock# 7110108
BRI-MAR Upper Horizontal Tailgate Pin and Clip for dump trailer gates. This pin is 3/4" in diameter with a 1/8" diameter clip.

Stock# 7110125
BRI-MAR Ramp Latch Hardware Kit comes with the J-Rod, Spring, Washer and Cotter Pin. The rod is 1/2" diameter and total overall length is 9-1/4".

Stock# 7110076
BRI-MAR Universal Cotter Pin is 1/4" x 2" and is used for many different applications on BRI-MAR trailers.|
SUPPLIES LIMITED

Stock# 7110028
BRI-MAR 7-Way RV Plug with five foot cord.

Stock# 7110029
BRI-MAR Breakaway Switch with Cable has pig tail wiring that would be hardwired directly into a BRI-MAR wiring harness set up for a brake away kit.

Stock# 7110036
BRI-MAR Chrome License Plate Light surface mounts on 2" centers and grounds through mounting screws. Features a removable housing for replaceable bulb.
SUPPLIES LIMITED

Stock# 7110081
BRI-MAR 7-3/4" Tri-Angle Leaf Spring Equalizer Bar is used in multi-axle suspensions which accommodate Double Eye leaf springs.
Dimensions:  A= 7-3/4",  B= 3"

Stock# 7110079
BRI-MAR 4-1/2" long x 7/8" leaf spring equalizer bolt fits the T200015, T200014, B136-019 or any equalizer bar that requires a 7/8" bolt. Nut sold separately.

Stock# 7110080
BRI-MAR 7/8" nut fits Bri-Mar equalizer nut with grease fitting #T800506 (Sku# 7110079). 7/8" bolt sold separately.

Stock# 7110086
BRI-MAR double eye trailer leaf spring hanger measures 3.25" high x 2" wide and has a 9/16" bolt hole.

Stock# 7110088
BRI-MAR Center Slipper Leaf Spring Hanger is designed for slipper spring set ups on BRI-MAR trailers LPHD, EH, DT712. One of the mounting holes are a round 7/8" Diameter and the other is 7/8" square.

Stock# 7110090
BRI-MAR Front Leaf Spring Hanger is designed for slipper spring set ups on BRI-MAR trailers DT610/DT712. The spring mounting holes are 9/16".

Stock# 7110085
BRI-MAR Front/Rear Leaf Spring Hanger is designed for double eye set ups on BRI-MAR tandem axle trailers. The spring mounting holes are 9/16".

Stock# 7110089
BRI-MAR Rear Leaf Spring Hanger is designed for slipper spring set ups on BRI-MAR trailers LPHD/EH/DT712. The spring mounting holes are 3/8".

Stock# 7110092
BRI-MAR Rear Leaf Spring Hanger is designed for slipper spring set ups on BRI-MAR trailers DT610/DT712. The spring mounting holes are 3/8".

Stock# 7110077
BRI-MAR Slipper Spring Equalizer Bar used on Bri-Mar DT610 and DT712 tandem trailers that have 1-3/4" wide springs. 
Dimensions: Outside Hole Centers= 9-3/4" (One hole is 9/16", Other is 7/16") Center Hole = 7/8"

Stock# 7110078
BRI-MAR Slipper Spring Equalizer Bar used on Bri-Mar LPHD, EH, T, and HT series trailers tandem trailers that have 1-3/4" wide springs. 
Dimensions: Outside Hole Centers = 11-3/4" (One hole is 9/16", Other is 7/16") Center Hole = 7/8"

Stock# 7110132
BRI-MAR Slotted Crank Handle for dump tarp roller kits found on BRI-MAR trailers made after 2006

Stock# 7110037
BRI-MAR Steel Mounting Bracket for 2" Round Lights designed with 2-5/16" hole for mounting with grommet. Bracket is designed for the front corner of a BRI-MAR: LP, EH, HT and CH series trailer.

Stock# 7110039
BRI-MAR Steel Light Box for 6-1/2" Oval Tail Light is designed with a hole for mounting the light with a grommet. The bracket has as a hole for a 2" market light with grommet on one side and is open on the other. Bracket is designed Right side tail light of a BRI-MAR EH series trailer but can be used universally as well.

Stock# 7110038
BRI-MAR Steel Light Box for 6-1/2" Oval Tail Light is designed with a hole for mounting the light with a grommet. The bracket also comes with a license plate mounting holes as well as a hole for a 2" market light and grommet. Bracket is designed for the Left tail light of a BRI-MAR: EH series trailer.

Stock# 7110040
BRI-MAR Steel Light Box for 6-1/2" Oval Tail Light is designed with a hole for mounting the light with a grommet. The bracket has as a hole for a 2" market light with grommet on one side and is open on the other. Bracket is designed for the Left or Right side tail light of a BRI-MAR HT series trailer.

Stock# 7110004
Length=34", Length at Top =20" Height=16-1/2", Width=10", Trailer Type= Single Axle Dump, Gauge=16
BRI-MAR cold-rolled non-finish steel trailer fender. Mounting hardware sold separately.

Stock# 7110016
Length=34", Height=16", Width=10"  BRI-MAR Smooth Finish Single Fender with wire clips pre-welded. Can be primed and painted for a custom color finish.

Stock# 7110008
Length=72", Height=16", Width=10"
BRI-MAR smooth finish tandem fender for R series trailer. Can be primed and painted for a custom color finish.

Stock# 7110017
Length=72", Height=16", Width=10"
BRI-MAR Smooth Finish Tandem Fender with wire clips pre-welded.
Can be primed and painted for a custom color finish.

Stock# T7110010
Length=74", Height=19", Width=10", Width of Brace= 1-1/2"  BRI-MAR Tandem Tread Plate Fender with Bracket and Brace. Mounting brace helps secure the fender for mounting and weight distribution. Can be primed and painted for a custom color finish.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# T7110013
Length=74", Height=19", Width=10", Width of Brace= 1-1/2"  BRI-MAR Tandem Tread Plate Fender with Bracket and Brace. Marker light mounting holes/cutouts are designed for 2" round marker lights with grommets and are protected on the inside from road debris.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# 7110005
Length=72", Height=16", Width=10", Cut Out= 4" x 2"
BRI-MAR Tandem Tread Plate Fender with cut out for frame and mounting.
Can be primed and painted for a custom color finish.

Stock# 7110011
BRI-MAR Steel Fender Step/Gusset is designed for the Right Front or Left Rear of an EH series trailer. The gusset will weld on to the fender and the the frame making a seamless transition and sleek look. Comes with a hole for 2" marker light and grommet.

Stock# 7110012
BRI-MAR Steel Fender Step/Gusset is designed for the Left Front or Right Rear of an EH series trailer. The gusset will weld on to the fender and the the frame making a seamless transition and sleek look. Comes with a hole for 2" marker light and grommet.

Stock# 7110006
BRI-MAR Tread Plate Steel Fender Step/Gusset is designed for the Left Front or Right Rear of Dump Trailers. The gusset will weld on to the fender and the the frame making a seamless transition and sleek look

Stock# 7110007
BRI-MAR Tread Plate Steel Fender Step/Gusset is designed for the Right Front or Left Rear of Dump Trailers. The gusset will weld on to the fender and the the frame making a seamless transition and sleek look

Stock# 7110046
BRI-MAR single cylinder hydraulic pump with remote and 2.5 gallon horizontal mount reservoir is a direct replacement for your single cylinder Bri-Mar dump trailer. Comes complete with solenoid, switch and remote with 20' Cable.

Stock# 7110047
BRI-MAR twin cylinder hydraulic pump with remote and 4.5 gallon horizontal mount reservoir is a direct replacement for your twin cylinder Bri-Mar dump trailer. Comes complete with solenoid, switch and remote with 20' Cable.

Stock# 7110068
BRI-MAR 4" Hydraulic Cylinder for 10,000 to 12,000 lb LP, LE and R series Dump Trailers. Accepts a 1" pin and center to center pin when compressed is 35-1/2". Max PSI for unit is 3,000 PSI.

Stock# 7110049
BRI-MAR horizontal mount hydraulic reservoir has a 2.5 gallon capacity and measures 7" W x 7" H x 20" D. Cap and clamp are included.

Stock# 7110050
BRI-MAR horizontal mount hydraulic reservoir has a 4.5 gallon capacity and measures 10" W x 10" H x 15" D. Cap and clamp are included.

Stock# 7110165
BRI-MAR 3" Hydraulic Cylinder Seal Kit is the older version and was specifically designed to replace the seals and O-rings on a 3" hydraulic cylinder found on BRI-MAR trailers produced in 2012 or prior.

Stock# 7110072
BRI-MAR 4" Hydraulic Cylinder Seal Kit is specifically designed to replace the seals and O-rings on a 4" hydraulic cylinder found on BRI-MAR trailers.

Stock# 7110074
BRI-MAR Hydraulic Cylinder Seal Kit is for Olson telescoping hydraulic cylinders found on BRI-MAR trailers 2012 and newer.

Stock# 7110061
BRI-MAR 3/8" Male ORB - (2) 3/8" Female ORB T-Fitting.
SUPPLIES LIMITED -  (1) REMAINING IN STOCK

Stock# 7110056
BRI-MAR Coil, 2-Way / 2-Position Magnet is an encapsulated coil designed for heavy duty hydraulic valve applications. Hole through center is 1/2" diameter.

Stock# 7110054
BRI-MAR Hydraulic Bucher Pump Starter Solenoid for Bucher pumps on BRI-MAR trailers manufactured after 2003. Black Canister.

Stock# 7110053
BRI-MAR Hydraulic Bucher Pump Starter Solenoid for bucher pumps on BRI-MAR trailers manufactured before 2003. Silver Canister

Stock# 7110075
BRI-MAR Hydraulic Cylinder Mounting Pin measures 1" x 7" and has two retainer holes.

Stock# 7110052
BRI-MAR Hydraulic Reservoir Cap has 1" thread and is designed for use on Bucher systems commonly found on BRI-MAR trailers.

Stock# 7110057
BRI-MAR Remote with Cord is for the Power Up / Gravity Down function commonly found on hydraulic power units for dump bodies. Wiring harness has three wires come out the end: Black with ring terminal, white with a U-shaped terminal and a green wire.

Stock# 7110058
BRI-MAR Remote with Cord is for the Power Up / Power Down function commonly found on hydraulic power units for dump bodies. Wiring harness has four wires come out the end: Black with ring terminal and white, red, and green, with a U shaped terminal.

Stock# 7110059
BRI-MAR Wireless Remote Control System includes: (2) remote key fob transmitters, (1) receiver module and (1) antenna. The typical range for the remote key fob is 50-100 ft. The receiver module and transmitters are water resistant. Detailed instructions are included which makes for an easy installation.

Stock# 7110130
BRI-MAR Multi-Mesh  6' x 16' Replacement Tarp only for dump trailer tarp systems Is a straight tarp with a pocket on one end. There are grommets on tarp to help aid in securing cover to truck or trailer.

Stock# 7110131
BRI-MAR Multi-Mesh  7' x 18' Replacement Tarp only for dump trailer tarp systems Is a straight tarp that is fastened to the bar. There are grommets on the tarp to help aid in securing cover to truck or trailer.