BRI-MAR Trailer Fenders and Hardware

Stock# 7110016
Length=34", Height=16", Width=10"  BRI-MAR Smooth Finish Single Fender with wire clips pre-welded. Can be primed and painted for a custom color finish.

Stock# 7110004
Length=34", Length at Top =20" Height=16-1/2", Width=10", Trailer Type= Single Axle Dump, Gauge=16
BRI-MAR cold-rolled non-finish steel trailer fender. Mounting hardware sold separately.

Stock# 7110017
Length=72", Height=16", Width=10"
BRI-MAR Smooth Finish Tandem Fender with wire clips pre-welded.
Can be primed and painted for a custom color finish.

Stock# 7110008
Length=72", Height=16", Width=10"
BRI-MAR smooth finish tandem fender for R series trailer. Can be primed and painted for a custom color finish.

Stock# 7110005
Length=72", Height=16", Width=10", Cut Out= 4" x 2"
BRI-MAR Tandem Tread Plate Fender with cut out for frame and mounting.
Can be primed and painted for a custom color finish.

Stock# T7110013
Length=74", Height=19", Width=10", Width of Brace= 1-1/2"  BRI-MAR Tandem Tread Plate Fender with Bracket and Brace. Marker light mounting holes/cutouts are designed for 2" round marker lights with grommets and are protected on the inside from road debris.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# T7110010
Length=74", Height=19", Width=10", Width of Brace= 1-1/2"  BRI-MAR Tandem Tread Plate Fender with Bracket and Brace. Mounting brace helps secure the fender for mounting and weight distribution. Can be primed and painted for a custom color finish.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# 7110011
BRI-MAR Steel Fender Step/Gusset is designed for the Right Front or Left Rear of an EH series trailer. The gusset will weld on to the fender and the the frame making a seamless transition and sleek look. Comes with a hole for 2" marker light and grommet.

Stock# 7110012
BRI-MAR Steel Fender Step/Gusset is designed for the Left Front or Right Rear of an EH series trailer. The gusset will weld on to the fender and the the frame making a seamless transition and sleek look. Comes with a hole for 2" marker light and grommet.

Stock# 7110007
BRI-MAR Tread Plate Steel Fender Step/Gusset is designed for the Right Front or Left Rear of Dump Trailers. The gusset will weld on to the fender and the the frame making a seamless transition and sleek look

Stock# 7110006
BRI-MAR Tread Plate Steel Fender Step/Gusset is designed for the Left Front or Right Rear of Dump Trailers. The gusset will weld on to the fender and the the frame making a seamless transition and sleek look

Stock# 7110015
BRI-MAR Fender Knob for Car Hauler Model Trailers are designed to secure the fender to the trailer. They make them removable with this knob to allow for more space for a car door to open and close while loaded on the trailer.