BRI-MAR Trailer Gates, Ramps & Gate Hardware

Stock# T7110112
BRI-MAR Complete Barn Door Gate Kit for 6' wide LP and LE series Bri-mar dump trailers. Measures 76" W x 22" H. The barn door gate kit is a factory replacement unit that fits on your 6' wide Bri-Mar Dump Trailer.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# T7110113
BRI-MAR Complete Barn Door Gate Kit for 7' wide LP and LPHD series Bri-Mar dump trailers.  Measures.86" W x 22" H. The barn door gate kit is a factory replacement unit that fits on your 7' wide Bri-Mar Dump Trailer.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# 7110117
BRI-MAR Heavy Duty Left Hand Side Barn Door gate fits 7' wide Bri-mar trailers and measures 21" H x 43" W to the mounts. The barn door gate is a factory replacement unit that fits on your 7' wide Bri-Mar Trailer. (Left side only)

Stock# 7110114
BRI-MAR Heavy Duty Right Hand Side Barn Door gate fits 6' wide Bri-mar trailers and measures 21" H x 37" W to the mounts. The barn door gate is a factory replacement unit that fits on your 6' wide Bri-Mar Trailer. (Right side only)

Stock# 7110115
BRI-MAR Heavy Duty Left Hand Side Barn Door gate fits 6' wide Bri-mar trailers and measures 21" H x 37" W to the mounts. The barn door gate is a factory replacement unit that fits on your 6' wide Bri-Mar Trailer. (Left side only)

Stock# 7110116
BRI-MAR Heavy Duty Right Hand Side Barn Door gate fits 7' wide Bri-Mar trailers and measures 21" H x 43" W to the mounts. The barn door gate is a factory replacement unit that fits on your 7' wide Bri-Mar Trailer. (Right side only)

Stock# 7110124
BRI-MAR Solid Ramp is designed for CH series trailers. The ramp is a factory replacement unit that measures 63" L x 12-3/4" W and is sold as a single unit.

Stock# 7110126
BRI-MAR 42" ramp strap for EH series trailers is designed to help hold the ramp in the vertical position. The strap has a 42" over all length with a 40-1" hole center on the larger holes and a 37-1/2" center on the smaller holes.

Stock# 7110145
BRI-MAR bumper is designed to cushion between the frame and the bed. the bumper measures 1" high x 2-1/2" diameter and it has a .43" mounting hole. Commonly found on BRI-MAR trailers 2015 or newer.

Stock# 7110125
BRI-MAR Ramp Latch Hardware Kit comes with the J-Rod, Spring, Washer and Cotter Pin. The rod is 1/2" diameter and total overall length is 9-1/4".

Stock# 7110111
BRI-MAR 1/2" Spring Latch allows the assembly to be locked in the open position. Turning the lever allows the bolt to close under spring pressure. This latch has a 3-1/2" long handle and when pin is closed there is 1" of pin exposed out of bracket.

Stock# 7110118
BRI-MAR 1/2" Universal Door Hold Back Assembly is not side specific. Latch can be switched for use on either Left or Right hand side buy removing the retainer pin and switching the 1/2" pin to the other side.

Stock# 7110108
BRI-MAR Upper Horizontal Tailgate Pin and Clip for dump trailer gates. This pin is 3/4" in diameter with a 1/8" diameter clip.

Stock# 7110109
BRI-MAR Lower Vertical Tailgate Pin for dump trailer gates. This pin is 1/2" in diameter.