CAM SUPERLINE Factory Trailer Parts

Stock# 7122150
CAM SUPERLINE draw gate trailer latch. This item features a sturdy steel construction with an 8,000 lbs. limit, cam lock design, keeper pin,  and will need to be bolted to the application.

Stock# 7122030
CAM Superline 1/2" Spring Latch allows the assembly to be locked in the open position. Turning the lever allows the bolt to close under spring pressure.  This latch has a 3-1/2" long handle and when pin is closed there is 1" of pin exposed out of bracket.

Stock# 7122031
CAM Superline 3/4" Spring Latch allows the assembly to be locked in the open position. Turning the lever allows the bolt to close under spring pressure.  This latch has a 3-1/2" long handle and when pin is closed there is 1" of pin exposed out of bracket.

Stock# 7122076
CAM SUPERLINE galvanized bottom cup component is typically used with dump trailer cam locks. The base measures 5" x 1-1/4" and the mounting holes are 4" on center. The top cup is sold separately.

Stock# 7122077
CAM SUPERLINE replacement cam lock hasp measures 5-1/2" x 1" and the mounting holes are 4-1/4" on center.

Stock# 7122072
CAM SUPERLINE replacement cam lock handle includes a pre-installed bracket and black vinyl grip. The handle measures 13-1/4" to the rivet holding the bracket and the shaft is 19-5/8".

Stock# 7122056
Length=71-1/4", Height=19", Width=9", Height of Back= 10"
CAM Superline Tandem Tread Plate Fender for CAM Superline Scout and Warrior series equipment hauler trailers. Can be primed and painted for a custom color finish.

Stock# 7122058
Length=68-3/4", Height=13-1/2", Width=9", Height of Back= 8"
CAM SUPERLINE Tandem Tread Plate Fender for CAM Superline 5 ton channel frame equipment hauler trailers (EH). Can be primed and painted for a custom color finish.

Stock# 7122057
Length=68-3/4", Height=13-1/2", Width=9", Height of Back= 8"
CAM SUPERLINE Tandem Tread Plate Fender for CAM Superline Car Haulers and  5 ton angle frame equipment hauler trailers (EH). Can be primed and painted for a custom color finish.

Stock# 7122029
CAM Superline "New-Style" fender knob was designed for use on car hauler removable trailer fenders. Constructed of heavy duty black plastic with 1/2" mounting nut. Sold as each.

Stock# 7122087
CAM SUPERLINE is boldly displayed on this 3/16" thick super durable poly mudflap and it measures 9" wide x 11" tall.

Stock# 7122081
CAM SUPERLINE long leg black powder coated finish left hand torsion ramp spring with 180 degree leg angle is designed for a shaft no larger in diameter then 2".

Stock# 7122082
CAM Superline long leg black powder coated finish left hand torsion ramp spring with 180 degree leg angle is designed for a shaft no larger in diameter then 2".

Stock# 7122035
CAM Superline Yellow zinc plated linch pin can be used to secure utility trailer ramp gates, cargo trailer doors and windows.

Stock# 7122149
CAM Superline Hitch Pin and Clip for dump trailer gates and hitches. This pin is 1" in diameter, 5-1/4" long and comes with a 1/8" diameter clip.

Stock# 7122032
CAM Superline Lower Vertical Tailgate Pin and Clip for dump trailer gates. This pin is 1/2" in diameter with a 1/8" diameter clip.

Stock# 7122033
CAM Superline Ramp Latch Gate J Hook comes with the J-Rod and Cotter Pin. The rod is 3/8" diameter, total overall length is 5-1/2", and is constructed of stainless steel.

Stock# 7122034
Yellow zinc plated snapper pin can be used to secure utility trailer ramp gates, doors and coupler latches.

Stock# 7122041
CAM Superline Electric Single Acting Power Unit with 2 Gallon for hydraulic dump trailer hoist/rams. It is a 12 VDC pump with a hand held control unit complete with 20 foot cord and load control. Dimensions: 18" x 16" x 10"

Stock# 7122148
CAM Superline Electric Double Acting Power Unit with 1 Gallon for hydraulic dump trailer hoist/rams. It is a 12 VDC pump with a hand held control unit complete with 20 foot cord and load control. This is a Bhydraulics Incorporated brand system made for CAM Superline's specifications. Dimensions: 18" x 8" x 8

Stock# 7122038
CAM SUPERLINE hydraulic cylinder mounting pin measures 1" x 6-1/2" and comes with 1 C-clip and 1 greasable zerk fitting.

Stock# 7122042
CAM SUPERLINE Hydraulic flow control valve is used to regulate the flow rate in CAM Superline hydraulic applications. 3/8" fittings, sold as each.

Stock# 7122010
For use on single, tandem and tri-axle trailers with 12 volt electric brakes. Breakaway kit includes a breakaway battery, battery box, switch, cable, pin, and a solar powered trickle charger on top.

Stock# 7122006
This is a FASTWAY Breakaway Switch with Cable and Harness plug and is designed to work with FASTWAY brand breakaway systems commonly used on CAM Superline trailers.

Stock# 7122071
CAM Superline Triple-Acting tailgate latch is commonly found on the Right Hand Upper or Left Hand Lower tailgate section of CAM Superline LPD and LPDHD utility trailers.

Stock# 7122070
CAM SUPERLINE triple-acting tailgate latch is commonly found on the Left Hand Upper or Right Hand Lower section CAM Superline LPD and LPDHD utility trailers.

Stock# 7122093
Replacement yellow vinyl handle grip for CAM SUPERLINE tailgate/dump latch systems.

Stock# 7122095
CAM SUPERLINE tilt trailer latch hook is used to catch the tilt latch on CAM Superline brand tilt trailers. This item will need to be welded to the trailer.

Stock# 7122002
CAM Superline Gray ABS License Plate Light with Bracket surface mounts on 6-1/2" centers and grounds through mounting screws. Features a removable housing for replaceable bulb. Hardware not included.

Stock# 7122099
CAM SUPERLINE trailer safety chain with slip hook and 3/8" diameter links with a chain length of 34". The safety chain is GR70 rated, sold as a pair, and is designed for CAM Superline trailers and goosenecks rated up to 18K. SOLD AS A 'PAIR'

Stock# 7122080
CAM SUPERLINE trailer stabilizer leg only are a replacement part for rear stabilizers on CAM Superline utility trailers. Item has a gloss black powder coat finish.

Stock# T7122083
CAM Superline Ladder Ramp is designed for heavy duty use on CAM Superline Equipment Hauler series trailers but may work on other brands. The ladder ramp is made of high strength steel and painted black for corrosion resistance.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# 7122036
CAM Superline ramp stabilizer pin was designed for heavy duty use on CAM Superline brand trailer ramps but may work on other brands. The pin is made of yellow zinc plated steel for corrosion resistance. The unit measures 5/8" x 2-5/8" and is sold as each.

Stock# 7122019
CAM SUPERLINE tandem axle slipper spring hanger kit is used with 2" wide slipper springs on trailers with 3,500 lb. to 7,000 lb. axles.

Stock# 7122020
CAM SUPERLINE tandem axle slipper spring hanger kit is used with 2" wide slipper springs on trailers with 3,500 lb. to 7,000 lb. axles.

Stock# 7122028
CAM SUPERLINE tandem axle slipper spring hanger kit is used with 2" wide slipper springs on trailers with 8,000 lb. axles.

Stock# 7122018
25-1/4" 6 leaf double eye leaf spring is designed for trailer applications. Measures 1-3/4" wide and has a 3,500 lb. capacity.