CAR MATE Factory Trailer Parts

Stock# 1660006
Length (B)=34", Height (C)=14", Width (A) =10-3/4", Wheel Size=14"  Material =0.09 Aluminum.  CAR MATE Smooth Aluminum Flat Back Fender for 14" Wheels has a 1" radius on the front and 7/8"-90° flat back.

Stock# 1660007
Length (B)= 69-3/4", Height (C)= 17-1/2", Width (A)= 8", Wheel Size=15"  Material =0.09 Aluminum
CAR MATE Smooth Aluminum Teardrop Tandem Fender for 15" Wheels has a 1" radius on the front and 90° flat back.

Stock# 1660009
Length (B)= 68", Height (C)= 20", Width (A)= 8-1/2", Wheel Size=15"  Material =0.09 Aluminum
CAR MATE smooth aluminum teardrop tandem fender for 15" Wheels has a 1" radius on the front and 90° flat back.

Stock# 1660045
Track Length = 93" Overall = 97.75" Spring Center = 78"  Includes EZ-Lube Spindles
Car Mate by Dexter 2-3/8" diameter round tube trailer axle includes spindle nuts, nut retainers, and D-washers.

Stock# 1660043
Track Length = 85" Overall = 89.75" Spring Center = 70"   Includes EZ-Lube Spindles
Car Mate by Dexter 2-3/8" diameter round tube trailer axle includes spindle nuts, nut retainers, D-washers, and spring seats.

Stock# 1660044
Track Length = 92" Overall = 96.75" Spring Center = 78"   Includes EZ-Lube Spindles
Car Mate by Dexter 2-3/8" diameter round tube trailer axle includes spindle nuts, nut retainers, D-washers, and spring seats.

Stock# 1660042
Overall Length = 90" Hub Face = 86" Mounting Bracket Outside = 72" Torsion Arm: 0°
Dexter Torflex trailer torsion axle is made for Car Mate trailers.

Stock# 1660041
Overall Length = 96" Hub Face = 92" Mounting Bracket Outside = 76" Torsion Arm: 0°
This Dexter Torflex trailer torsion axle is made for Car Mate trailers.

Stock# 1660015
CAR MATE replacement cam lock bar includes 2 hinges and black vinyl grip for the handle. The handle measures 11-3/4" to the rivet holding the bracket and the shaft is 36-3/8" over all.

Stock# 1660019
CAR MATE Replacement Cam Door Hasp Assembly comes with both pieces. The locking holes on the hasp are 1/2" in diameter and the mounting holes are 4-1/16" on center.

Stock# 1660024
CAR MATE replacement cam lock pipe retainer measures 4-1/16" x 1-9/16" and the mounting holes are 2-7/8" on center. Bottom pipe retainer sold separately.
SUPPLIES LIMITED

Stock# 1660022
CAR MATE steel ramp door hinge with a 1/2" diameter steel pin, steel thrust bearings, and (1) grease fitting. Commonly used on Car Mate brand utility and car hauler trailers. Hardware not included.

Stock# 1660020
CAR MATE galvanized 12" steel strap hinge with a 1/2" dia. steel pin and steel thrust bearings. Commonly used on Car Mate brand utility and enclosed trailers. Hardware not included.
SUPPLIES LIMITED

Stock# 1660021
CAR MATE Galvanized 16" steel strap hinge with a 1/2" dia. steel pin and steel thrust bearings. Commonly used on Car Mate brand utility and enclosed trailers. Hardware not included.

Stock# 1660028
CAR MATE trailer door hook and keeper assembly with a 4"hook. Stainless steel construction.

Stock# 1660029
CAR MATE trailer door hook and keeper assembly. Stainless steel construction.

Stock# 1660040
CAR MATE rubber bumper with 1-Bolt Hole design. Rubber bumpers are designed to protect the rear of a truck or utility trailer when backing to an elevated surface or on the bottom of ramps, tailgates, and enclosed trailer doors. Overall Dimensions: 2.5" W x 2" H

Stock# 1660039
CAR MATE rubber bumper with 2-Bolt Hole design. Rubber bumpers are designed to protect the rear of a truck or utility trailer when backing to an elevated surface or on the bottom of ramps, tailgates, and enclosed trailer doors. Overall Dimensions:  2.5" W x 1.25" D x 4" H

Stock# 1660038
CAR MATE rubber bumper with 2-Bolt Hole design. Rubber bumpers are designed to protect the rear of a truck or utility trailer when backing to an elevated surface, or on the bottom of ramps, tailgates, and enclosed trailer doors. Overall Dimensions:  2.5" W x 2" D x 7.75" H

Stock# 1660001
CAR MATE slim line ID light bar for over 80" applications is only 1-5/8" tall. Features sonically sealed, waterproof lens and housing in a single unit. Dimensions:  W = 15-1/2"    H = 1-5/8"   D = 3/4"

Stock# 1660034
CAR MATE overhead ramp door cables feature aluminum eye ends. Each cable is 1/8" - 7 x 7 and measures 130" in length. (Sold in Pairs)

Stock# 1660035
CAR MATE overhead ramp door cables feature aluminum eye ends. Each cable is 1/8" - 7 x 7 and measures 170" in length. (Sold in Pairs)

Stock# 1660036
CAR MATE over head door cable drums are specifically used with spring assist lift systems. Kit includes 1 left red-coded drum only.

Stock# 1660037
CAR MATE over head door cable drums are specifically used with spring assist lift systems. Kit includes one right black-coded drum only.