DEXTER Axle and Suspension Hardware

Stock# 5331448
Fits Dexter 2K to 8K axles with 1" end of spindle. Designed to be used with a cotter pin.

Stock# 5331447
DEXTER spindle nut measures 1-1/2" OD and 1"-14 ID. Fits Axles: 2,000-8,000 lb. and Dexter Axles after 2002.

Stock# 5331436
6,000 lbs. Capacity each, 3" wide trailer leaf springs constructed with heavy duty spring steel. Sold as each.

Stock# 5331435
5,000 lbs. Capacity each, 3" wide trailer leaf springs constructed with heavy duty spring steel. Sold as each.

Stock# 5331302
The Dexter single axle suspension kit  is used with 1-3/4" wide, double eye springs.
Replacement for A/P 122.

Stock# 5331299
DEXTER single axle suspension kit is used with 1-3/4" wide, double eye springs. Replacement for A/P 171.

Stock# 5331307
DEXTER Single Axle Shock Kit fits 2-3/8" and 3" diameter tube for 1.75 wide springs.

Stock# 5331303
The Dexter tandem axle suspension kit  is used with 1-3/4" wide, double eye springs.
Replacement for A/P 233.

Stock# 5331155
DEXTER Heavy-Duty Suspension Kit for tandem axle trailers with 1-3/4" wide Double Eye leaf springs.
Dimensions:   A = 6-1/8"   B = 4"

Stock# 5331300
Dexter tandem axle suspension kit  is used with 1-3/4" wide, double eye springs with 35" axle spacing.  Replacement for A/P-264-00.

Stock# 5331040
Heavy-Duty Suspension Kit for tandem axle trailers with 33" axle spacing and 1-3/4" wide Double Eye springs.
Dimensions:   A = 5-3/4"   B = 2"

Stock# 5331311
DEXTER slipper spring suspension kit is used with 2" wide slipper springs with 33.5" axle spacing on trailers that have 2,800 lb. to 6,000 lb. axles.

Stock# 5331312
DEXTER Slipper Spring Suspension Kit is used with 2" wide slipper springs with 36" axle spacing on trailers that have 7,000 lb. and 8,000 lb. axles.

Stock# 5331305
Dexter E-Z Flex® Tandem Equalizer Suspension Kit  is used with 1-3/4" wide, 26" double eye springs on trailers that have 33" axle centers and axles up to 6000 lbs.
The E-Z Flex® equalizers in this kit (PN 013-143-03) can replace existing (PN 013-104-02) equalizers.

Stock# 5331306
DEXTER E-Z Flex® Tandem Equalizer Suspension Kit  is used with 1-3/4" wide, 26" double eye springs on trailers that have 35" axle centers and axles up to 8,000 lbs. The E-Z Flex® equalizers in this kit (PN 013-144-03) can replace existing (PN 013-122-02) equalizers.

Stock# 5331304
DEXTER triple axle suspension kit  is used with 1-3/4" wide, double eye springs.
Replacement for A/P-335. 

Stock# 5331154
Heavy-Duty Suspension Kit for triple axle trailers with 1-3/4" wide Double Eye leaf springs.
Dimensions:   A = 5-3/4"   B = 2"

Stock# 5331437
DEXTER 1" x 5-1/2" steel spring bolt is for the 1" i.d. bushing on Dexter 5K and 6K springs. Use with K06-112-00 nut. Sold as each.

Stock# 5331443
DEXTER 1-1/8" x 6" steel bolt is for the center 1-1/8" i.d. bushing on Dexter K13-107-07 equalizers. Sold as each.

Stock# 5331438
DEXTER 1" steel spring bolt nut is for the 1" x 5-1/2" spring bolt for the the 1" i.d. bushing on Dexter 5K and 6K springs. Use with K06-112-00 bolt. Sold as each.

Stock# 5331439
Dexter Front Leaf Spring Hanger 10 - 12K is a weld on hanger designed for 3" wide leaf springs.
Dimensions: A= 6.25", B= 7.5", C= 3.125", D= .25", E= 5", F= 1" , Finish= Raw

Stock# 5331441
Dexter Center Leaf Spring Hanger 10 - 12K is a weld on hanger designed for 3" wide leaf springs.
Dimensions: A= 4", B= 5.75", C= 3.75", D= .25", E= 5", F= 1.125" , Finish= Raw

Stock# 5331440
Dexter Rear Leaf Spring Hanger 10 - 12K is a weld on hanger designed for 3" wide leaf springs.
Dimensions: A= 7.625", B= 8.5", C= 3.125", D= .25", E= 5", F= .4375" , Finish= Raw

Stock# 5331321
Raw Steel trailer axle tie plate for axles with 3" O.D. tubes and 2" wide springs. Sold as each.

Stock# 5331245
Trailer axle and leaf spring tie-plate mounting hardware kit. U-Bolt Size 3/8" x 1-7/8" x 4-1/4"
Kit Includes: (4) U-bolts, (8) nuts & lock washers, (2) axle tie plates.

Stock# 5331246
Trailer axle and leaf spring tie-plate mounting hardware kit. U-Bolt Size 7/16"-20 x 2-1/2" x 5"
Kit includes: (4) U-bolts, (8) nuts & lock washers, (2) axle tie plates.

Stock# 5331247
Trailer axle and leaf spring tie-plate mounting hardware kit. U-Bolt Size 1/2" x 3-1/8" x 7-1/8"
Kit Includes: (4) U-bolts, (8) nuts & lock washers, (2) axle tie plates.

Stock# 5331032
Dexter kit #K71-384-00 allows for conversion of 1-3/4" wide leaf spring location from top-to-bottom, or bottom-to-top on 2-3/8" round axles without cutting or welding.

Stock# 5331033
Dexter kit #K71-385-00 allows for conversion of 1-3/4" wide leaf spring location from top-to-bottom, or bottom-to-top on 3" round axles without cutting or welding.

Stock# 5331389
DEXTER Tandem Torflex Torsion Axle Lift Kit raises the frame height 2-5/8". This kit is designed to be used with a #10 Dexter Torflex torsion axle mounted with the side mount system and not on top mounted axles.
Note: This lift kit can not be used with 3" tall brackets.

Stock# 5331442
Dexter 14-1/8" slipper leaf spring equalizer bar is used in multi-axle suspensions which accommodate Slipper style leaf springs and is rated at 10k-12K. Designed for applications with 38" axle spacing. Spring Width: 3".

Stock# 5331314
Fits Dexter 'D'-Washer style E-Z Lube axles.  Includes: (1) 1" I.D. 'D'-style nut retainer.

Stock# 5331020
Fits Dexter 10" x 1-1/2" and 10" x 2-1/4" drums.    Kit Includes: (2) 1"-14 thread slotted castle nuts, (2) 1" I.D. x 1-11/16" O.D. 'D'-style spindle washers and (2) 2-1/4" long cotter pins.

Stock# 5331021
Fits DEXTER 12" x 2" and 8k drums.   Kit Includes: (2) 1"-14 thread 12-slot castle nuts, (2) 1" I.D. x 2" O.D. 'D'-style spindle washers and (2) 2-1/4" long cotter pins.

Stock# 5331019
Fits Dexter E-Z Lube axles.   Kit Includes: (2) 1"-14 thread 6-slot castle nuts, (2) 1" I.D. x 1-11/16" O.D. 'D'-style spindle washers and (2) 1" I.D. 'D'-style tang washers.

Stock# 5331037
Fits Dexter 'D'-Washer style E-Z Lube axles.   Kit Includes: (2) 1"-14 thread hex jam nuts, (2) 1" I.D. x 1-11/16" O.D. 'D'-style spindle washers and (2) 1" I.D. 'D'-style nut retainers.

Stock# 5331023
Fits Dexter 9k drums (after 10-1-89) and 10k GD drums. (for one drum)   Kit Includes: (2) 1-1/2"-12 thread spindle nuts, (1) 1-1/2" I.D. x 2-3/16" O.D. single-tooth spindle washer and (1) 1-1/2" I.D. tang washer.

Stock# 5331024
Fits Dexter 10k HD, 12k and 15k drums. (for one drum)   Kit Includes: (2) 1-3/4"-12 thread spindle nuts, (1) 1-3/4" I.D. x 3" O.D. single-tooth spindle washer and (1) 1-3/4" I.D. single-tooth tang washer.

Stock# 5331018
1/4"-28 thread zerk fittings for .230/.235" diameter hole. Fits Dexter E-Z Lube spindles, shackle bolts & hanger bolts.