DEXTER Trailer Brake Repair Parts

Stock# 5331446
DEXTER 3.5" Fortress Bolt-On Oil Cap 9K - 12K provides revolutionary protection for your trailer axle. Fits Dexter 9-12K Axle Models: #13G, #13D, #14, #14T, D90, D100G, D100, D120.

Stock# 5331432
(K90-002-02) Caliper Yoke/Bracket Replacement for Dexter 10,000 lb. to 12,000 lb. Disc Brake Axle - Fits LH or RH. Does NOT fit 12K torflex axles. Includes 8 O-Rings (Already Installed in Caliper Mount Sleeve).

Stock# 5331445
DEXTER 3.5" Fortress Oil Cap 9K - 10K provides revolutionary protection for your trailer axle.

Stock# 5331444
Dexter's 2.875" Fortress Oil Cap 5.2K - 8K provides revolutionary protection for your trailer axle.

Stock# 5331074
DEXTER Electro/Hydraulic Trailer Drum brake actuator is compatible with all vehicle electric connectors and works with most in-cab controllers. Electro/Hydraulic brake actuator provides 1,000 psi of pressure for 1-3 axles equipped with drum brakes. Brake fluid pressure is proportional to the electronic brake controller signal. Sealed, anodized aluminum housing provides a weather tight seal.  Note: Not Compatible with GMC Integrated Brake Controllers

Stock# 5331075
DEXTER Electro/Hydraulic Trailer Disc brake actuator is compatible with all vehicle electric connectors and works with most in-cab controllers. Electro/Hydraulic brake actuator provides 1,600 psi of pressure for 1-3 axles equipped with disc brakes. Brake fluid pressure is proportional to the electronic brake controller signal. Sealed, anodized aluminum housing provides a weather tight seal.  Note: Not Compatible with GMC Integrated Brake Controllers

Stock# 5331138
Battery with box, trickle charger and breakaway switch/cable. Recommended for Electric-Over-Hydraulic trailer brake actuators. 9 amp/hour battery.

Stock# 5331003
DEXTER 7" x 1-1/4" Magnet kit includes (1) magnet assembly, clip & spring. Fits 7" diameter 2,200 lbs. capacity electric brakes.

Stock# 5331041
DEXTER 10" x 1-1/2" Electric trailer brake shoe & lining replacement kit, 1 wheel. Fits 10" diameter 2,200 lbs. capacity electric trailer brakes.

Stock# 5331007
DEXTER 10" x 2-1/4" Electric trailer brake shoe & lining replacement kit, 1 wheel. Fits 10" 3,500 lbs. capacity electric trailer brakes.

Stock# 5331228
DEXTER 10" x 2-1/4" Self Adjusting Electric trailer brake shoe & lining replacement kit, 1 right hand wheel.  Includes (1) primary shoe & lining, (1) secondary shoe & lining, (2) Shoe Hold Down Springs, (2) Hold Down Pins and instruction sheet. For 3,500 lbs. capacity axles.

Stock# 5331229
DEXTER 10" x 2-1/4" Self Adjusting Electric trailer brake shoe & lining replacement kit, 1 left hand wheel.  Kit Includes: (1) primary shoe & lining, (1) secondary shoe & lining, (2) Shoe Hold Down Springs, (2) Hold Down Pins and instruction sheet. For 3,500 lbs. capacity axles.

Stock# 5331008
DEXTER 10" x 2-1/4" Magnet kit includes (1) magnet assembly, clip & spring. Fits 10" diameter 3,500 lbs. capacity electric brakes.

Stock# 5331232
DEXTER 12" x 2" Self Adjusting Electric trailer brake shoe & lining replacement kit, 1 right hand wheel.
Dexter part # K71-676-00, includes (1) primary shoe & lining, (1) secondary shoe & lining, (2) Shoe Hold Down Springs, (2) Hold Down Pins and instruction sheet. Fits 7,000 lbs. capacity self adjusting electric brakes.

Stock# 5331233
DEXTER 12" x 2" Self Adjusting Electric trailer brake shoe & lining replacement kit, 1 left hand wheel. Kit includes (1) primary shoe & lining, (1) secondary shoe & lining, (2) Shoe Hold Down Springs, (2) Hold Down Pins and instruction sheet. Fits 7,000 lbs. capacity self adjusting electric brakes.

Stock# 5331022
DEXTER 12" x 2" Electric trailer brake shoe & lining replacement kit, 1 wheel. Fits 12" 6,000 lbs. & 7,000 lbs. capacity electric trailer brakes.

Stock# 5331057
DEXTER 12" x 2" Magnet kit includes (1) magnet assembly, retainer & spring. Fits 12" diameter 7,000 lbs. capacity electric brakes.

Stock# 5331011
DEXTER 12" x 2" DXQ Magnet kit includes (1) magnet assembly, retainer & spring. Fits 12" diameter 5,200 lbs. capacity electric brakes.

Stock# 5331045
Fits CAST Backing Plate (April, 2000 & newer) DEXTER electric trailer brakes. (8k, 9k, 10kGD) Right Hand trailer brake shoe replacement kit.

Stock# 5331044
Fits CAST Backing Plate (April, 2000 & newer) Dexter electric trailer brakes. (8k, 9k, 10k GD) Left Hand trailer brake shoe replacement kit.

Stock# 5331047
Fits STAMPED Backing Plate (prior to April 2000) Dexter electric trailer brakes. (8k, 9k, 10kGD) Right Hand trailer brake shoe replacement kit.

Stock# 5331046
Fits STAMPED Backing Plate (prior to April 2000) Dexter electric trailer brakes. (8k, 9k, 10kGD) Left Hand trailer brake shoe replacement kit.

Stock# 5331194
Dexter 12-1/4" x 3-3/8" brake dust shields (8k-10k) keeps road debris and the elements off the brake assembly to improve the life of your brakes.

Stock# 5331051
Fits CAST Backing Plate (April, 2000 & newer) Dexter electric trailer brakes. (10kHD) Right Hand trailer brake shoe replacement kit.

Stock# 5331050
Fits CAST Backing Plate (April, 2000 & newer) Dexter electric trailer brakes. (10kHD) Left Hand trailer brake shoe replacement kit.

Stock# 5331049
Fits STAMPED Backing Plate (prior to April 2000) Dexter electric trailer brakes. (10kHD) Right Hand trailer brake shoe replacement kit.

Stock# 5331048
Fits STAMPED Backing Plate (prior to April 2000) Dexter electric trailer brakes. (10k HD) Left Hand trailer brake shoe replacement kit.

Stock# 5331218
Fits CAST Backing Plate (April, 2000 & newer) Dexter electric trailer brakes. (12-15k) Right Hand trailer brake shoe replacement kit.

Stock# 5331219
Fits CAST Backing Plate (April, 2000 & newer) Dexter electric trailer brakes. (12-15k) Left Hand trailer brake shoe replacement kit.

Stock# 5331069
DEXTER 12-1/4" Magnet kit includes (1) magnet assembly, retainer & spring. Fits 12-1/4" diameter Dexter 7.2, 8, 9, 10, 10GD, 11.2, 12, and 15K capacity electric brakes.

Stock# 5331333
(K71-636-00) Caliper Replacement Kit for Dexter 6,000 lb. Disc Brake Axle - Fits LH or RH
SUPPLIES LIMITED

Stock# 5331343
(K71-693-00) Caliper Replacement Kit for Dexter 7,000 lb. Disc Brake Axle - Fits LH or RH
SUPPLIES LIMITED

Stock# 5331334
(K71-630-00) Caliper Replacement Kit for Dexter 8,000 lb. Disc Brake Axle - Fits LH or RH

Stock# 5331336
(K71-623-00) Replacement Disc Brake Pad Kit fits DEXTER 3.5K Calipers and includes 4 pads to service 1 axle.
SUPPLIES LIMITED

Stock# 5331337
(K71-629-00) Replacement Disc Brake Pad Kit fits DEXTER 6K-7K-8K Calipers

Stock# 5331335
(K71-180-00) Replacement Disc Brake Pad Kit fits DEXTER 10K -12K Calipers

Stock# 5331426
(K89-002-02) Caliper Replacement for Dexter 10,000 lb. to 12,000 lb. Disc Brake Axle - Fits LH or RH. Compatible with Dexter 070-006-01, 070-006-02, and 070-010-01 Brake Rotors.

Stock# 5331433
Replacement 5/8" Shoulder Bolt for Dexter 10,000 lb and 12,000 lb Disc Brake Caliper. Fits Dexter 089-002-02 Caliper Right or Left Hand. Corrosion resistant for long life.

Stock# 5331434
Replacement 5/8" nut for the Shoulder Bolt for Dexter 10,000 lb and 12,000 lb Disc Brake Caliper. Fits Dexter K07-186-00 Caliper bolt. Corrosion resistant for long life.

Stock# 5331363
Adjuster screw and spring fits Dexter 10 x 1-1/2", 10 x 2-1/4" hydraulic and electric, and 12 x 2" electric brake assemblies.

Stock# 5331365
Fits Dexter 10" x 2-1/4" free backing hydraulic brake assemblies.

Stock# 5331364
Fits Dexter 12" electric Nev-R-Adjust Electric Brakes. Includes everything for a left hand and right hand assembly.

Stock# 5331379DA
Fits Dexter 12-1/4" forward self adjusting hydraulic brake assemblies manufactured after 02/97.

Stock# 5331357
Fits Dexter 12-1/4" x 3-3/8", 12-1/4" x 4" and 12-1/4" x 5" electric brake assemblies with cast backing plates.

Stock# 5331355
Electric Brake Spring Kit fits DEXTER 12-1/4" x 2-1/2" (7.2K) electric brake assemblies.

Stock# 5331356
Fits Dexter 12-1/4" x 3-3/8", 12-1/4" x 4" and 12-1/4" x 5" electric brake assemblies with stamped backing plates.

Stock# 5331368
Fits Dexter 12-1/4" x 3-3/8" (7.2K), 12-1/4" x 4", and 12-1/4" x 5" electric brake assemblies.

Stock# 5331344
Caliper Rebuild Kit for 6K, 7K and 8K Dexter disc brakes.

Stock# 5331345
Caliper Rebuild Kit for 10K, and 12K Dexter disc brakes.

Stock# 5331331
Fits Dexter 12-1/4 x 3-3/8", 12-1/4 x 4" and 12-1/4 x 5" brakes with 1-1/4" diameter cylinder (9K-12K).

Stock# 5331339
DEXTER 90° Torflex Brake Hose Kit is designed for tight clearance applications. Fits all Torflex axles.
SUPPLIES LIMITED

Stock# 5331340
DEXTER Electric Brake Parts Kit contains extra heat shrink caps, magnet retainer clips, wire clips, plugs, wire grommets, and wire connectors for repairing Dexter brakes.

Stock# 5331189
DEXTER Clamp Ring for Dexter 9k and 10k hubs with 8 on 6.5 with 5/8" studs.

Stock# 5331195
DEXTER 12-1/4" x 4" brake dust shields (10k) keeps road debris and the elements off the brake assembly to improve the life of your brakes.

Stock# 5331196
DEXTER 12-1/4" x 5" brake dust shields (12k-15k) keeps road debris and the element off the brake assembly to improve the life of your brakes.

Stock# 5331388
This armature plate is used to convert SKU: 5331373 (DEXTER Drum 10K, 8-6.50, 5/8"-18 Studs #K568704, K10788), SKU: 5331374 (DEXTER Drum 10KGD, 8-6.50, 5/8"-18 Studs #K568270), SKU: 5331371 (DEXTER Drum 12K, 8-6.50, 5/8"-18 Studs #A568260), and SKU: 5331372 (DEXTER Drum 12K, 8-6.50, 5/8"-18 Studs #A090871) for use with electric brakes.

Stock# 5331424
DEXTER brake rotor mounting stud. 1/2" - 13 UNC hub thread, 1/2" - 20 UNF nut thread.

Stock# 5331313
DEXTER brake backing plate mounting bolt. 7/16" x .81"-20 thread.
Note: 7/16" Press in brake stud for 10" electric brake assemblies.

Stock# 5331178
Dexter brake mounting bolt attaches brake backing plates to axle brake flanges.
Note: 3/8" Press in brake stud for 12" x 2" electric brake assemblies.  Dexter Part #007-112-00

Stock# 5331179
Dexter brake backing plate mounting nut/washer. Used to attach electric or hydraulic brake baking plates to axle brake flange. 3/8"- 24 thread.   Dexter Part #006-193-00

Stock# 5331144
Dexter brake mounting bolt attaches brake backing plates to axle brake flanges.   Dexter Part #007-116-00
Note: 7/16" bolts will not work with the 12" x 2" electric brake assemblies.

Stock# 5331193
Dexter brake mounting lock washer is used to attache brake backing plates to axle brake flanges.

Stock# 5331145
DEXTER brake mounting nut is used to attache brake backing plates to axle brake flanges.

Stock# 5331197
DEXTER brake mounting bolt attaches brake backing plates to axle brake flanges.
Note: 1/2" Press in brake stud for 12-1/4" x 2-1/2" electric brake assemblies.

Stock# 5331190
Dexter brake mounting nut is used to attache brake backing plates to axle brake flanges.

Stock# 5331255
DEXTER K71-355-00 Drum Mounting Screws fit  9K and 10K Dexter GD drums. 1-1/2" Long x 1/2" - 13 UNC.

Stock# 5331256
DEXTER Drum/Hub mounting bolt. Used to attach 10k, 12k, and 15K hubs and drums together.  1-3/4" Long x 1/2" -13 UNC.  (4-Pack)

Stock# 5331187
DEXTER electric trailer brake magnet retainer clip is used to attach the magnet to the lever arm. Fits Dexter 10" x 1-1/2", 10" x 2-1/4" and 12" x 2" electric brake assemblies.

Stock# 5331188
Dexter electric trailer brake magnet retainer clip is used to attach the magnet to the lever arm. Fits Dexter 12-1/4" x 2-1/2", 12-1/4" x 3-3/8", 12-1/4" x 4", 12-1/4" x 5" electric brake assemblies.