Trailer Parts Superstore® offers Locking Paddle Latches, Finger Pull Bolt Latches, Trailer Door Hook & Keepers, Door Sockets, Door Plungers, "L" Type Door Handles and many styles of Grab Handles. All are commonly used on horse trailers, cargo trailers, utility trailers and work vehicles.
Stock# 1326561 Spring loaded bolt allows the assembly to be locked in the open position. Turning the lever allows the bolt to close under spring pressure. This latch has a 3-7/8" long handle and is zinc plated.
Stock# 1326562 BUYERS PRODUCTS spring loaded bolt allows the assembly to be locked in the open position. Turning the lever allows the bolt to close under spring pressure. This latch has a 1-3/8" long handle and is zinc plated.
Stock# 7110111 BRI-MAR 1/2" Spring Latch allows the assembly to be locked in the open position. Turning the lever allows the bolt to close under spring pressure. This latch has a 3-1/2" long handle and when pin is closed there is 1" of pin exposed out of bracket.
Stock# 7122030 CAM Superline 1/2" Spring Latch allows the assembly to be locked in the open position. Turning the lever allows the bolt to close under spring pressure. This latch has a 3-1/2" long handle and when pin is closed there is 1" of pin exposed out of bracket.
Stock# 7122031 CAM Superline 3/4" Spring Latch allows the assembly to be locked in the open position. Turning the lever allows the bolt to close under spring pressure. This latch has a 3-1/2" long handle and when pin is closed there is 1" of pin exposed out of bracket.
Stock# 7115132 CARRY-ON spring latch complete kits are used on the rear tail gates or ramps of Carry-On utility trailers. Comes with 4 self-tapping screws for easy installation. Pin Diameter is 5/8".
Stock# 1326529 BUYERS PRODUCTS finger pull bolt latch is zinc plated. The angled end of the cam allows for simple locking with a pull latch for unlocking.
Stock# 1326535 Buyers Zinc plated pull down catch comes with a padlock eye to lock closed. The rectangular catch is 1-1/4" long and comes complete with striker.
Stock# 1326534 Buyers Large Zinc plated pull down catch comes with a padlock eye to lock closed. The rectangular catch is 2" long and comes complete with striker.
Stock# 1326280 BUYERS PRODUCTS spring loaded bolt allows the assembly to be locked in the open position. Turning the lever allows the bolt to close under spring pressure.
Stock# 7122070 CAM SUPERLINE triple-acting tailgate latch is commonly found on the Left Hand Upper or Right Hand Lower section CAM Superline LPD and LPDHD utility trailers.
Stock# 7122071 CAM Superline Triple-Acting tailgate latch is commonly found on the Right Hand Upper or Left Hand Lower tailgate section of CAM Superline LPD and LPDHD utility trailers.
Stock# 1326560 BUYERS PRODUCTS mini style tear drop latch is polished stainless steel. The latch has 4 mounting holes, cylinder with keys are included. The mini latch is perfect for small compartments or boxes that need to be secure.
Stock# 1326528 BUYERS PRODUCTS single latch point, folding T handle, is polished stainless steel. The latch comes with hidden studs, gasket, and cylinder with keys included.
Stock# 1326559 BUYERS PRODUCTS single latch point, folding T handle, is polished stainless steel. The latch comes with hidden studs, gasket, and cylinder with keys included.
Stock# 1326557 BUYERS PRODUCTS double latch point, folding T-handle, is polished stainless steel. Designed to be mounted into a 3-3/4" x 3" recess opening.
Stock# 1326527 BUYERS PRODUCTS Die Cast single point T-Handle compression latch has a black powder coated body and a chrome handle. It comes with a 1/2" gasket, with hidden studs, as well as a lock with two keys.
Stock# 1326185 Heavy Duty junior size single point flush mount paddle latch is designed to mount in a 2-3/4" x 3-3/4" recess. Stainless Steel construction for ultimate durability and corrosion resistance.
Stock# 1326184 BUYERS PRODUCTS heavy-duty standard size single point flush mount paddle latch is designed to mount in a 3-3/8" x 4-5/8" recess. Stainless Steel construction for ultimate durability and corrosion resistance.
Stock# 7107142 Big Tex Locking Junior Size Paddle Latch comes with a plain finish and includes two keys. The cut out size for the latch is 2-5/8" x 3-11/16" and it does not have any mounting holes for a semi universal fit.
Stock# 7107143 BIG TEX Junior Size Paddle Latch comes with a plain finish. The cut out size for the latch is 2-5/8" x 3-11/16" and mounting holes are on 3-3/16" horizontal center and 3" vertical center.
Stock# 7107145 Big Tex locking junior size paddle latch is stainless steel and includes two keys. The cut out size for the latch is 2-5/8" x 3-11/16" and mounting holes are on 3-3/16" horizontal center and 3" vertical center.
Stock# 7107146 Big Tex Locking Junior Size Paddle Latch with inside release is stainless steel and includes two keys. The inside release will allow the latch to be operated from the inside with a knob that is removable. The cut out size for the latch is 2-5/8" x 3-11/16".
Stock# 7107147 Big Tex Locking T-Handle Single Point Latch is stainless steel and includes two keys. The cut out size for the latch is 2-7/8" x 3-5/8" and mounting holes are on 3-7/8" horizontal center and 3-5/16" vertical center.
Stock# 7107148 Big Tex Locking T-Handle Single Point Latch is stainless steel and includes two keys. The cut out size for the latch is 2-3/8" x 3-1/8" and mounting holes are on 3" horizontal center and 3-1/8" vertical center.
Stock# 7107149 Big Tex Locking T-Handle Single Point Latch is stainless steel and includes two keys. The cut out size for the latch is 3-1/8" x 4-7/16" and mounting holes are on 3-3/4" horizontal center and 3-3/4" vertical center. Cam has fixed depth of 2-1/2" from bottom of flange to bottom of cam and mounting studs are already mounted on handle.
Stock# 7107150 Big Tex Locking Large Paddle Latch comes with a plain finish and includes two keys. The cut out size for the latch is 3-1/8" x 4-7/16" and it does not have any mounting holes for a semi universal fit.
Stock# 7107151 BIG TEX non-locking large paddle latch comes with a plain finish. The cut out size for the latch is 3-1/8" x 4-7/16" and it does not have any mounting holes for a semi universal fit.
Stock# 7107144 BIG TEX locking junior size paddle latch comes with a plain finish, inside release and includes two keys. The inside release will allow the latch to be operated from the inside with a knob that is removable. The cut out size for the latch is 2-5/8" x 3-11/16".
Stock# 7110042 BRI-MAR Locking Pump Box Paddle Latch includes two keys. Direct replacement for existing Bri-Mar pump box latches. Mounting hardware is not included.
Stock# 1326190 Chrome plated trailer door handle rotates full 360°. Locking model can be locked in 4 positions spaced 90° apart. 5/16" square shaft, 1-1/2" C-C mounting holes. Includes two keys.
Stock# 1326191 BUYERS PRODUCTS chrome plated trailer door handle rotates full 360°. Locking model can be locked in 4 positions spaced 90° apart. 5/16" square shaft, 1-1/2" C-C mounting holes. Includes two keys.
Stock# 7102068 TRITON black painted trailer door handle rotates 90°. Locking model can be locked in 2 positions spaced 90° apart. 5/16" square shaft 2-5/8" long, 1-1/2" C-C mounting holes. Includes two keys.
Stock# 1326687 Bar assembly constructed of A-36 steel, with aluminum rod end and bracket for ease of use and strength of operation. The latch assembly can be used to provide a seal for dump body and dump trailer tailgates.
Stock# 1326695 The Steel Tailgate Latch Rod End is designed to be used with the winder to tighten the tailgate latch. The rod measures 3/4"-10 x 7-1/2".
Stock# 1326694 BUYERS PRODUCTS Steel Tailgate Latch Winder Assembly is a replacement winder assembly that turns to tighten down and seal the tailgate with the tailgate latch.
Stock# 1326693 BUYERS PRODUCTS Steel Tailgate Latch Winder is a replacement winder that turns to tighten down and seal the tailgate with the tailgate latch.
Stock# 7110118 BRI-MAR 1/2" Universal Door Hold Back Assembly is not side specific. Latch can be switched for use on either Left or Right hand side buy removing the retainer pin and switching the 1/2" pin to the other side.
Stock# 7110125 BRI-MAR Ramp Latch Hardware Kit comes with the J-Rod, Spring, Washer and Cotter Pin. The rod is 1/2" diameter and total overall length is 9-1/4".
Stock# 7122033 CAM Superline Ramp Latch Gate J Hook comes with the J-Rod and Cotter Pin. The rod is 3/8" diameter, total overall length is 5-1/2", and is constructed of stainless steel.
Stock# 7115131 CARRY-ON Spring Latch Repair Kit is used to replace the handle, spring, and roll pin on Carry-On spring latches found on the rear gate. Pin Diameter is 9/16".
Stock# 1326211 BUYERS PRODUCTS 18" x 5/8" round aluminum grab handle can be used on cargo trailers and vehicles to provide extra support and stability where needed.
Stock# 1326589 Round Aluminum cargo trailer grab handle with two sets of mounting holes for added strength. Dimensions:L= 13" x Hole Centers= 10.125" & 12.125"
Stock# 1326590 Round Aluminum cargo trailer grab handle with two sets of mounting holes for added strength. Dimensions:L= 16" x Hole Centers= 13.125" & 15.125"
Stock# 1583187 Velvac® Grab Handles are manufactured with 3/4" O.D. heavy gauge stainless steel tubing and have 5/16" diameter mounting holes. SUPPLIES LIMITED - 1 left in stock
Stock# 7102065 TRITON Chrome Rear Cover Handle comes with all of the mounting hardware. It is designed for use on Triton Snowmobile trailers and mounts on 9-1/8" centers.
Stock# 1623038 Heavy Duty entry door bumper is constructed of industrial rubber for a durable application. It can be installed anywhere bumper protection is needed. SUPPLIES LIMITED
Stock# 1326377 Bumper is designed to protect the body of a vehicle from the damage caused by door handles, latches and cam locks. Also serves as a cushion for ramps and lift gates.
Stock# 7110145 BRI-MAR bumper is designed to cushion between the frame and the bed. the bumper measures 1" high x 2-1/2" diameter and it has a .43" mounting hole. Commonly found on BRI-MAR trailers 2015 or newer.
Stock# 5445031 FLEET ENGINEERS utility style rubber bumper is designed to protect the body of a vehicle from the damage caused by door handles, latches and cam locks. It also serves as a cushion for loading ramps and lift gates.
Stock# 5445030 The Great Dane style rubber bumper is designed to protect the body of a vehicle from the damage caused by door handles, latches and cam locks. It also serves as a cushion for loading ramps and lift gates.
Stock# 1326388 Cabinet door bumper is specifically designed to dampen sound as well as vibration. Overall width is 3/8", Overall height is 1/2" SUPPLIES LIMITED
Stock# 1326472 BUYERS PRODUCTS door hold back and keeper is designed to easily and securely keep your door in a fully open position. Cast aluminum construction.
Stock# 1577002 Cargo trailer door hook and keeper assembly is designed to hold doors open against the side of a body, the hook manually engages and disengages. Made from injection molded gray plastic.
Stock# 1577003 Cargo trailer door hook and keeper assembly is designed to hold doors open against the side of a body, the hook manually engages and disengages. Made from injection molded grey plastic.
Stock# 1622042 Designed for pulling overhead doors, side doors and wheel carts, Kinedyne door pulls feature a galvanized steel clip for rust protection and pre-punched holes for easy installation.
Stock# 1326723 BUYERS PRODUCTS 2-1/2" miniature easy grip hood catch with brackets. Contains two rubber catches and two brackets. 3/8" mounting fasteners not included.
Stock# 1326722 BUYERS PRODUCTS 4-7/8" easy grip hood catch with U brackets. Contains two rubber catches and two brackets. 3/16" mounting fasteners not included.
