Factory Original Trailer Lights

Stock# 5419353
KARAVAN left hand RED submersible tail light functions as a Stop/Turn/Tail Lamp. The polycarbonate lens and housing unit contains 10 LED's and mounts horizontally. Mounting hardware is not included and comes with pre-installed 20" wire leads. 
Dimensions:  W = 6.2"   H = 3.7"   D = 2.2"

Stock# 5419356
KARAVAN right hand RED submersible tail light functions as a Stop/Turn/Tail Lamp. The polycarbonate lens and housing unit contains 6 LED's and mounts horizontally. Mounting hardware is not included and comes with pre-installed 25" wire leads.
Dimensions:  W = 6.25"   H = 3.75"   D = 2.375"

Stock# 5419355
KARAVAN left hand RED submersible tail light functions as a Stop/Turn/Tail Lamp. The polycarbonate lens and housing unit contains 7 LED's and mounts horizontally. Mounting hardware is not included and comes with pre-installed 25" wire leads.
Dimensions:  W = 6.25"   H = 3.75"   D = 2.375"

Stock# 7160059
PARAISO Waterproof LED trailer light kit for all trailers over 80" wide. Each light has (11) rear diodes, (1) side diodes and left light has (4) license plate diodes.

Stock# 7160058
PARAISO Waterproof LED trailer light kit for all trailers under 80" wide. Each light has (10) rear diodes, (1) side diodes and left light has (2) license plate diodes.

Stock# 7160060
PARAISO Waterproof Slim-Line LED trailer light kit for all trailers under 80" wide features a slim 1-7/8" depth. Each light has (12) rear diodes, (1) side diodes and left light has (3) license plate diodes.

Stock# 5177178
The Power1 LED square trailer lighting kit is designed to conform to applicable US FMVSS108 and Canadian CMVSS safety standards for all vehicles and trailers over or under 80" wide. This trailer light kit is a great LED alternative to incandescent lights.

Stock# 5177177
The C7280 LED low-profile submersible trailer light kit is designed to conform to applicable US FMVSS108 and Canadian CMVSS safety standards for trailers over and under 80" wide. The driver’s side features a combination of 8-function stop, tail, turn, rear and side reflex, rear clearance and side marker and license illumination functions.

Stock# 5177175
The LED submersible square trailer light kit is designed to conform to applicable US FMVSS108 and Canadian CMVSS safety standards for trailers over and under 80" wide. This kit is not only ideal for boat trailers, but for any utility, camping, snowmobile, and motorcycle trailer where LED lights are desired.

Stock# 5177176
The LED submersible square trailer light kit is designed to conform to applicable US FMVSS108 and Canadian CMVSS safety standards for trailers over and under 80" wide. This kit is not only ideal for boat trailers, but for any utility, camping, snowmobile, and motorcycle trailer where LED lights are desired.

Stock# 5177162
HOPKINS LED magnetic towing light kit provides DOT compliant stop, tail and turn functions. Both lights feature an 22-lb. pull strength magnetic base to keep the lights in place while on the road.

Stock# 5177161
Eliminate the hassle of cords with the LED Wireless Magnetic Towing Light Kit. Just plug in the transmitter, position the lights, turn on the switch and go. It's so easy that you will not need to tap into existing wires or use any tools for installation.

Stock# 5291240
EZ-LOADER left hand red submersible tail light functions as a Stop/Turn/Tail Lamp and is intended to be used on EZ-Loader brand trailers under 80" wide. The polycarbonate lens and housing unit mount horizontally. Mounting hardware is included and comes with pre-installed 8" wire leads.
Dimensions:  W = 6-1/8"   H = 3-3/4"   D = 2-3/8"

Stock# 5291241
EZ-LOADER right hand red submersible tail light functions as a Stop/Turn/Tail Lamp and is intended to be used on EZ-Loader brand trailers under 80" wide. The polycarbonate lens and housing unit mount horizontally. Mounting hardware is included and comes with pre-installed 8" wire leads.
Dimensions:  W = 6-1/8"   H = 3-3/4"   D = 2-3/8"

Stock# 5291247
EZ-LOADER left hand red submersible composite LED tail light functions as a Stop/Turn/Tail Lamp and is intended to be used on EZ-Loader brand trailers over 80" wide. The polycarbonate lens and housing unit mount horizontally. Mounting hardware is included and comes with pre-installed 12" wire leads.
Dimensions:  W = 7-5/8"   H = 3-1/2"   D = 3"

Stock# 5291246
EZ-LOADER right hand red submersible composite LED tail light functions as a Stop/Turn/Tail Lamp and is intended to be used on EZ-Loader brand trailers over 80" wide. The polycarbonate lens and housing unit mount horizontally. Mounting hardware is included and comes with pre-installed 12" wire leads.
Dimensions:  W = 7-5/8"   H = 3-1/2"   D = 3"

Stock# 5291251
EZ-Loader left hand red submersible LED tail light functions as a Stop/Turn/Tail Lamp and is intended to be used on EZ-Loader brand trailers over 80" wide. The polycarbonate lens and housing unit mount horizontally. Mounting hardware is included and comes with pre-installed 12" wire leads.
Dimensions:  W = 6-1/4"   H = 3-5/8"   D = 2-1/4"

Stock# 5291250
EZ-LOADER right hand red submersible LED tail light functions as a Stop/Turn/Tail Lamp and is intended to be used on EZ-Loader brand trailers over 80" wide. The polycarbonate lens and housing unit mount horizontally. Mounting hardware is included and comes with pre-installed 12" wire leads.
Dimensions:  W = 6-1/4"   H = 3-5/8"   D = 2-1/4"

Stock# 5291248
EZ-LOADER by WESBAR waterproof LED light bar for trailers 80" or more in overall width. Pre-wired, single bullet supply and ring terminal ground, with 60" harness for easy installation.
Dimensions:  L = 20-1/2"   H = 1-1/2"   D = 1"

Stock# 5291245
EZ-LOADER by BARGMAN Sealed 2-Pin ABS Bracket Mount Red Marker Light. Commonly used as a fender light, with grommet #250-032127, on EZ-LOADER plastic step fenders with cut outs.
Dimensions:  W = 2-1/2"    H = 1-3/16"   D = 7/8"

Stock# 5291244
EZ-LOADER by OPTRONICS AL-91AB Sealed 2-Pin ABS Bracket Mount Amber Marker Light. Commonly used as a fender light, with grommet #A-91GB, on EZ-LOADER plastic step fenders with cut outs.  Wiring plug and mounting grommet/bracket sold separately.
Dimensions:  W = 2-1/2"    H = 1-3/16"   D = 7/8"

Stock# 5291249
EZ-LOADER by WESBAR Waterproof LED clearance/side marker "tongue" lights. Excellent for boat trailer tongue lighting. Snap-on lens with black base. Two wire construction with molded single bullet and barrel. Tested to FMVSS/CMVSS 108 requirements. P2 rated.
Dimensions:  W = 2.62"    H = 1.83"   D = .83"

Stock# 1041477
TecNiq T85 Square Left Hand LED Tail Light for use with Load Rite^Ⓒ Elite Series and 5-Starr^Ⓒ Model Trailers. 8 Functions include: Stop, Turn, Tail, Clearance, Side marker, Side Reflector, Rear Reflector, and License Plate Illuminator. Dimensions:  W = 4-1/8"   H = 4-1/8"   D = 3"

Stock# 1041478
TecNiq T85 Square Left Hand LED Tail Light for use with Load Rite^Ⓒ Elite Series and 5-Starr^Ⓒ Model Trailers. 7 Functions include: Stop, Turn, Tail, Clearance, Side marker, Side Reflector, and Rear Reflector. Dimensions:  W = 4-1/8"   H = 4-1/8"   D = 3"

Stock# 1041457
TecNiq T80 Rectangular Left Hand LED Tail Light for use with Load Rite^Ⓒ Elite Series and 5-Starr^Ⓒ Model Trailers. 8 Functions include: Stop, Turn, Tail, Clearance, Side marker, Side Reflector, Rear Reflector, and License Plate Illuminator.    Dimensions:  W = 8"   H = 2.88"   D = 2.88"

Stock# 1041456
TecNiq T80 Rectangular Right Hand LED Tail Light for use with Load Rite^Ⓒ Elite Series and 5-Starr^Ⓒ Model Trailers. 7 Functions include: Stop, Turn, Tail, Clearance, Side marker, Side Reflector, and Rear Reflector.    Dimensions:  W = 8"   H = 2.88"   D = 2.88"

Stock# 1660001
CAR MATE slim line ID light bar for over 80" applications is only 1-5/8" tall. Features sonically sealed, waterproof lens and housing in a single unit. Dimensions:  W = 15-1/2"    H = 1-5/8"   D = 3/4"

Stock# 5419113
KARAVAN red oval tail light functions as a Stop/Turn/Tail Lamp. The polycarbonate lens and housing unit contains a dual filament bulb and mounts either vertically or horizontally. Mounts with optional grommet.
Dimensions:  W = 6.5"   H = 2.25"   D = 2.6"

Stock# 5419114
KARAVAN red LED oval tail light functions as a Stop/Turn/Tail Lamp. The polycarbonate lens and housing unit contains LED's and mounts either vertically or horizontally. Mounts with grommet. Accepts standard 3-prong tail light plug and grommet not included.

Stock# 5419354

KARAVAN right hand RED submersible tail light functions as a Stop/Turn/Tail Lamp. The polycarbonate lens and housing unit contains 8 LED's and mounts horizontally. Mounting hardware is included and comes with pre-installed 20" wire leads. 
Dimensions:  W = 6"   H = 3.375"   D = 2.25"

Stock# 5419208
KARAVAN 2-pin ABS Snap-loc amber marker light. Commonly used as a fender light with grommet on plastic step fenders with cut outs.
Wiring plug and grommet/mounting bracket sold separately.
Dimensions:  W = 2-1/2"    H = 1-3/16"   D = 7/8"

Stock# 5419210
KARAVAN 2-pin ABS snap-loc mount red marker light. Commonly used as a fender light with grommet on plastic step fenders with cut outs.
Wiring plug and grommet/mounting bracket sold separately.
Dimensions:  W = 2-1/2"    H = 1-3/16"   D = 7/8"

Stock# 5419211
KARAVAN 2-wire ABS flush mount amber marker light comes with 72" brown and white wire lead and is commonly used as a utility clearance light.
Dimensions:  W = 4"    H = 2.38"   D = 1"

Stock# 5419214
KARAVAN 2-Pin ABS Snap-loc LED Amber Marker Light. Commonly used as a fender light with grommet on plastic step fenders with cut outs. Wiring plug and grommet/mounting bracket sold separately.
Dimensions:  W = 2-1/2"    H = 1-3/16"   D = 7/8"

Stock# 5419215
KARAVAN 2-Pin ABS Snap-loc Mount LED Red Marker Light. Commonly used as a fender light with grommet on plastic step fenders with cut outs. Wiring plug and grommet/mounting bracket sold separately.
Dimensions:  W = 2-1/2"    H = 1-3/16"   D = 7/8"

Stock# 5419221
KARAVAN identification bar light for over 80" wide applications. Waterproof light capsules are mounted  to a stainless steel housing. 2-wire 74" lead has 2 male bullet type connectors on the end.  Dimensions:  L = 14.25"   W = 1.18"   D = 0.81"

Stock# 5419231
KARAVAN sealed, surface mount, over 80" red LED with clear lens stop/turn/tail light with sleek new low-profile design---only 5/8" thick. Thin Line design with 11 super diodes for bright, dependable performance. Polycarbonate lens is sonic welded to housing for durability.   Dimensions: L = 15" D = 5/8" W = 1-3/8"

Stock# 5419225
KARAVAN sealed 3/4" round grommet mount amber marker light with two-pole flat plug on the end. Commonly used on Karavan cargo trailers and recreational trailers.
Dimensions:  W = 1.09"    D = 15/16" Lead Length = 48"

Stock# 5419226
KARAVAN sealed 3/4" round grommet mount amber marker light with two-pole flat plug on the end. Commonly used on Karavan cargo trailers and recreational trailers.
Dimensions:  W = 1.09"    D = 15/16" Lead Length = 6"

Stock# 5419227
KARAVAN sealed 3/4" round grommet mount red marker light with two-pole flat plug on the end. Commonly used on Karavan cargo trailers and recreational trailers.
Dimensions:  W = 1.09"    D = 15/16" Lead Length = 6"

Stock# 5419228
KARAVAN sealed 3/4" round grommet mount amber marker light with two-pole flat plug on the end. Commonly used on Karavan cargo trailers and recreational trailers.
Dimensions:  W = 1.09"    D = 15/16" Lead Length = 72"

Stock# 5422101
SHORELAND'R sealed amber marker/clearance light snaps into all ShoreLand'r 9" and 10" wide plastic step fenders. Dimensions:  L = 2-7/8"   W = 1-1/2"

Stock# 5422115
SHORELAND'R sealed red marker/clearance light snaps into all ShoreLand'r 9" and 10" wide plastic step fenders. Dimensions:  L = 2-7/8"   W = 1-1/2"

Stock# 5422170
DRY LAUNCH 3-light identification bar has a waterproof, air-trapping, submersible design that works like inverted water glass. All Tough GE Lexan® Polycarbonate construction. Low profile design with a 42'' pigtail.
Dimensions: 14"W x 1 1/2"H x 3/4"D

Stock# 5422298
SHORELAND'R (Right side) LED taillight includes mounting hardware, 3-wire plug-in harness with 12" wire lead.
Dimensions:  W = 7-15/16"   H = 2-11/16"   D = 2-13/16"

Stock# 5422299
SHORELAND'R (Left side) LED taillight includes mounting hardware, 3-wire plug-in harness with 12" wire lead.
Dimensions:  W = 7-15/16"   H = 2-11/16"   D = 2-13/16"

Stock# 5428137
MAGIC TILT LED Low profile Right Hand Submersible combination lamp manufactured by Jammy Inc. 24 diode configurations for 8 function use as Stop/Turn Light, Tail Light, Rear Clearance Light, Side Marker Light and Rear Reflex Reflector. Dimensions:  L = 6-1/8"   H = 3-5/8"   D = 2-1/4"

Stock# 5428138
MAGIC TILT LED Low profile Left Hand Submersible combination lamp manufactured by Jammy Inc. 24 diode configurations for 8 function use as Stop/Turn Light, Tail Light, Rear Clearance Light, Side Marker Light, Rear Reflex Reflector and Side Reflex Reflector with License Illuminator. Dimensions:  L = 6-1/8"   H = 3-5/8"   D = 2-1/4"

Stock# 7115147
CARRY-ON surface mount amber side marker light with reflector lens.
Dimensions:  W = 3-3/4"   H = 2"   D = 1"

Stock# 7115175
CARRY-ON left side combination tail light for all trailers under 80" wide.
Dimensions:  W = 5"   H = 4-1/2"   D = 2-7/8"

Stock# 7115176
CARRY-ON right side combination tail light for all trailers under 80" wide.
Dimensions:  W = 5"   H = 4-1/2"   D = 2-7/8"

Stock# 7115177
CARRY-ON left side combination tail light for all trailers over 80" wide.
Dimensions:  W = 5"   H = 4-1/2"   D = 2-7/8"

Stock# 7115178
CARRY-ON right side combination tail light for all trailers over 80" wide.
Dimensions:  W = 5"   H = 4-1/2"   D = 2-7/8"

Stock# 7115180
CARRY-ON two bulb amber marker/clearance light includes a high impact polycarbonate lens and black plastic housing.
Dimensions:  W = 4-1/8"   H = 1-1/4"

Stock# 7115183
CARRY-ON Double bulb 2 pin amber marker light has snap-lock tabs for a quick and easy install.
Dimensions:  L = 3.780"   W = 1.23"

Stock# 7115185
CARRY-ON Sealed, Surface Chrome Plastic Flange Mount Stop / Turn / Tail Light with 6 diodes. Wiring pigtail harness sealed into rear of light.
Dimensions: W = 7-9/16" H = 3-5/16" D = 3/4"

Stock# 7115184
CARRY-ON submersible ID bar light for over 80" wide applications.
Dimensions:  L = 17"   H = 1-1/2"   D = 1"

Stock# 7115186
CARRY-ON Sealed 3/4" Round, Grommet Mount Red Marker Light with two wire pig tail.
Dimensions:  W = 1.09"    D = 15/16"

Stock# 7115187
CARRY-ON Sealed 3/4" Round, Grommet Mount Amber Marker Light with two wire pig tail.
Dimensions:  W = 1.09"    D = 15/16"

Stock# 7115190
CARRY-ON Gray ABS License Plate Light surface mounts on 3-1/4" centers and grounds through mounting screws. Features a removable housing for replaceable bulb.

Stock# 7115189
CARRY-ON Sealed pre-wired , ABS Bracket Mount Amber/Red Fender Marker Light for the Right side. Mount to side or top of fenders to show widest point of trailer over 80" wide. Includes: (1) Complete Unit for Right Side