EZ-LOADER Trailer Bunk Brackets and Bunk Covers

Stock# 5291170
EZ-LOADER mounting bracket for bunks boards and Double or Single roller arm assemblies. This mounting bracket will allow the bunk/roller arm to pivot as needed. Holes = 3/8"

Stock# 5291147
EZ-LOADER 11-gauge zinc plated steel bunk mounting bracket bolts to bolster support brackets to attach bunks and set proper angle. Bracket measures 3" wide.

Stock# 5291146
EZ-LOADER heavy-duty zinc plated steel bunk mounting bracket bolts to bolster support brackets to attach bunks and set proper angle. Bracket is 3/16" thick x 3" wide.

Stock# 5291202
EZ-LOADER galvanized bunk mounting bracket mounts the bunks on EZ-Loader pontoon trailers from 1999-present. Bracket has 3/8" mounting holes, a 12-1/4" span and a 4" width. Sold as each.

Stock# 5291149
EZ-LOADER heavy-duty galvanized hat style bunk mount bracket attaches the bunk to upright bunk brackets on 3x3 cross members on trailers not exceeding 4,700 lbs capacity.

Stock# 5291234
EZ-LOADER boat trailer 1/2" x 3" x 1-1/4" bunk bracket retaining u-bolt. Mounting hardware sold separately.

Stock# 5291208
EZ-LOADER composite bunk covers fit over existing 4" wide carpeted bunks, 2 x 4's and aid the launching and loading of aluminum boats by providing a slippery surface for the boat to slide on. They are 18" long. One cover for every 2 linear feet of bunk. Sold as each.

Stock# 5291209
EZ-LOADER composite bunk covers fit over existing 6" wide carpeted bunks, 2 x 6's and aid the launching and loading of aluminum boats by providing a slippery surface for the boat to slide on. They are 18" long. One cover for every 2 linear feet of bunk. Sold as each.

Stock# 5291200
EZ-LOADER galvanized upright supports brackets for both bunk and roll trailers with 3" wide cross-members and is 9" tall.

Stock# 5291201
EZ-LOADER galvanized upright supports brackets for both bunk and roll trailers with 3" wide cross-members and is 12" tall.

Stock# 5291145
EZ-LOADER heavy-duty galvanized strap bunk mounting bracket bolts to the cross member on EZ-Loader personal water craft trailers. Measures 3/16" x 3" x 9". Strap tie plate required for installation sold separately.

Stock# 5291148
EZ-LOADER heavy-duty galvanized strap bunk mounting bracket tie plate secures the strap bunk mounting bracket to the crossmember on EZ-Loader water vehicle trailers. 3/8" x 5.44" hole centers.