EZ-LOADER Hubs, Spindle Hardware and Oil Caps

Stock# 5291213
EZ-LOADER complete 5-hole oil bath hub kit for axles with short hubs includes hub with races, bearings, seal, washer, nut, retainer nut and cotter pin, screw on bearing protector and lug nuts.  Hub journal length is 3-1/2" thru the center from rear casting edge to front casting edge.

Stock# 5291157
EZ-LOADER complete 5-hole oil bath (2005 to present) hub kit for axles with tapered spindles includes hub with races, bearings, seal, washer, nut, retainer nut and cotter pin, screw on bearing protector and lug nuts.

Stock# 5291158
EZ-LOADER kit replaces grease hubs on 15", 16" and 16.5" 6-hole wheels. Complete oil bath hub kit for axles with tapered spindles includes hub with races, bearings, seal, washers, nut, retainer nut and cotter pin, screw on bearing protector and lug nuts.
NOTE: This kit will not work with the EZ Loader Sure-Lube flow thru axles (made from 1990 thru 2001)

Stock# 5291254
EZ-LOADER - KNOTT TRAILER wheel hub has a seal bearing unit inside and will only work with AutoFlex-Knott axles commonly found on light duty EZ-LOADER and Magic Tilt trailers. 5-Lug unit with a 4.5" Bolt pattern and a 1.33" (33mm) opening.  Hub comes with lug nuts, dust cap, o-ring, flange nut, and grease seal.

Stock# 5291255
EZ-LOADER - KNOTT TRAILER wheel hub has a seal bearing unit inside and will only work with AutoFlex-Knott axles commonly found on light duty EZ-LOADER and Magic Tilt trailers. 5-Lug unit with a 4.5" Bolt pattern and a 1.55" (39mm) opening.  Hub comes with lug nuts, dust cap, o-ring, flange nut, and grease seal.

Stock# 5291153
EZ-LOADER 2.11" O.D. threaded aluminum oil bath cap with O-Ring fits any five lug Reliable oil bath hub including the 1-1/16" straight hub and 10" Reliable drums. Replaces original plastic cap 250-029202.

Stock# 5291154
EZ-LOADER 2.48" O.D. threaded aluminum oil bath cap with O-Ring fits 12" Reliable hubs and drums.

Stock# 5291024
13/16" I.D. axle spindle nut for EZ-LOADER axles. 20 threads per inch.

Stock# 5291155
EZ-LOADER 'D-Shape' axle spindle washer fits 3/4" thread spindles with 'flat spot'.

Stock# 5291025
13/16" I.D. 'Tooth' style axle spindle washer for EZ-Loader trailer axles

Stock# 5291233
EZ-LOADER plug is used on oil bath hubs from 2005-present. It requires a 3/16" allen wrench. Note: The wheel hub maybe a grease style that has this plug as well.