Stock# 5291240 EZ-Loader left hand red submersible tail light functions as a Stop/Turn/Tail Lamp and is intended to be used on EZ-Loader brand trailers under 80" wide. The polycarbonate lens and housing unit mount horizontally. Mounting hardware is included and comes with pre-installed 8" wire leads. Dimensions: W = 6-1/8" H = 3-3/4" D = 2-3/8"
Stock# 5291241 EZ-LOADER right hand red submersible tail light functions as a Stop/Turn/Tail Lamp and is intended to be used on EZ-Loader brand trailers under 80" wide. The polycarbonate lens and housing unit mount horizontally. Mounting hardware is included and comes with pre-installed 8" wire leads. Dimensions: W = 6-1/8" H = 3-3/4" D = 2-3/8"
Stock# 5291251 EZ-Loader left hand red submersible LED tail light functions as a Stop/Turn/Tail Lamp and is intended to be used on EZ-Loader brand trailers over 80" wide. The polycarbonate lens and housing unit mount horizontally. Mounting hardware is included and comes with pre-installed 12" wire leads. Dimensions: W = 6-1/4" H = 3-5/8" D = 2-1/4"
Stock# 5291250 EZ-LOADER right hand red submersible LED tail light functions as a Stop/Turn/Tail Lamp and is intended to be used on EZ-Loader brand trailers over 80" wide. The polycarbonate lens and housing unit mount horizontally. Mounting hardware is included and comes with pre-installed 12" wire leads. Dimensions: W = 6-1/4" H = 3-5/8" D = 2-1/4"
Stock# 5291247 EZ-LOADER left hand red submersible composite LED tail light functions as a Stop/Turn/Tail Lamp and is intended to be used on EZ-Loader brand trailers over 80" wide. The polycarbonate lens and housing unit mount horizontally. Mounting hardware is included and comes with pre-installed 12" wire leads. Dimensions: W = 7-5/8" H = 3-1/2" D = 3"
Stock# 5291246 EZ-LOADER right hand red submersible composite LED tail light functions as a Stop/Turn/Tail Lamp and is intended to be used on EZ-Loader brand trailers over 80" wide. The polycarbonate lens and housing unit mount horizontally. Mounting hardware is included and comes with pre-installed 12" wire leads. Dimensions: W = 7-5/8" H = 3-1/2" D = 3"
Stock# 5291244 EZ-LOADER by OPTRONICS AL-91AB Sealed 2-Pin ABS Bracket Mount Amber Marker Light. Commonly used as a fender light, with grommet #A-91GB, on EZ-LOADER plastic step fenders with cut outs. Wiring plug and mounting grommet/bracket sold separately. Dimensions: W = 2-1/2" H = 1-3/16" D = 7/8"
Stock# 5291245 EZ-LOADER by BARGMAN Sealed 2-Pin ABS Bracket Mount Red Marker Light. Commonly used as a fender light, with grommet #250-032127, on EZ-LOADER plastic step fenders with cut outs. Dimensions: W = 2-1/2" H = 1-3/16" D = 7/8"
Stock# 5291249 EZ-LOADER by WESBAR Waterproof LED clearance/side marker "tongue" lights. Excellent for boat trailer tongue lighting. Snap-on lens with black base. Two wire construction with molded single bullet and barrel. Tested to FMVSS/CMVSS 108 requirements. P2 rated. Dimensions: W = 2.62" H = 1.83" D = .83"
Stock# 5291248 EZ-LOADER by WESBAR waterproof LED light bar for trailers 80" or more in overall width. Pre-wired, single bullet supply and ring terminal ground, with 60" harness for easy installation. Dimensions: L = 20-1/2" H = 1-1/2" D = 1"
Stock# 5291239 EZ-LOADER 24' four conductor split harness & flat 4-pole trunk connector. Designed to split at the trailer tongue and run down each side of the frame, the harness is wired with a flat 4-pole plug that has a single ground terminal at the plug. This harness includes trunk connector and color-coded wiring with weatherproof connectors.
Stock# 5291238 EZ-LOADER 24' four conductor split harness & flat 4-pole trunk connector. Designed to split at the trailer tongue and run down each side of the frame, the harness is wired with a flat 4-pole plug and has 2 ground terminals at each end. This harness includes trunk connector and color-coded wiring with weatherproof connectors.
Stock# 5291237 EZ-LOADER 24' four conductor split harness & flat 4-pole trunk connector. Designed to split at the trailer tongue and run down each side of the frame, the harness is wired with a flat 4-pole plug that has a single ground terminal at the plug. This harness includes trunk connector and color-coded wiring with weatherproof connectors.
Stock# 5291236 EZ-LOADER light bar bracket features a galvanized steel construction and allows you to attach a 3 light ID bar on an EZ-Loader brand trailer. Dimensions: L = 15-3/4" H = 2" D = 1-1/2"