LOAD RITE Trailer Bunks, Bow Guides and Brackets

Stock# 1041333
6' x 2" x 4" bunk board covered on all sides with deluxe marine carpet has mounting brackets pre-installed at 56". Replace damaged or worn LoadRite bunks and renew trailer appearance with new marine grade carpeted bunk board. (Sold as each)

Stock# 1041305
8' x 2" x 4" pine bunk board covered with deluxe marine carpet. This bunk board is made with non-treated lumber. (Sold as each)
Replace damaged or worn Loadrite bunks and renew trailer appearance with new marine grade carpeted bunk board.

Stock# 1041323
LOADRITE 8' x 2" x 6" non treated bunk board covered with deluxe marine carpet.
Replace damaged or worn Loadrite bunks and renew trailer appearance with new marine grade carpeted bunk board.  (Sold as each)

Stock# 1041330
LOADRITE center section black plastic bunk cover. Fits 2" x 6" bunk boards and comes in a 36" length. Center section is best used with end pieces which are sold separately. Includes 1- 36" center section for 2" x 6" bunk boards.

Stock# 1041331
LOADRITE finished edge black plastic bunk cover. Fits 2" x 6" bunk boards and measures 12" in length.
Includes (1) - 2" x 6" x 12" finished edge section for 2" x 6" bunk boards.

Stock# 1041329
LOADRITE finished edge black plastic bunk cover. Fits 2" x 6" bunk boards and measures 24" in length.
Includes 1- 2" x 6" x 24" finished edge section for 2" x 6" bunk boards.

Stock# 1041364
LOADRITE Skiff / Jon boat bottom bow rest is designed to be mounted onto a 3" wide trailer tongue. The galvanized brackets are vertically adjustable up to 4", and designed to provide support below the bow area of flat bottom boats. Carpeted bunk is 2" x 4" x 19.5"

Stock# 1041454
LOADRITE bunk pivot bar assembly features a 2" x 6" x 42" bunk, galvanized support brackets with pre-greased hinges and a galvanized 2" x 3" x 38-7/8" tube. This is commonly used on single axle LoadRite boat trailers. Attaching hardware sold separately.

Stock# 1041380
LOADRITE Galvanized Side Guide Bracket is at a 90° and measures 1-1/2" x 1-1/2" square. The long side is 33" and the shorter side is 26" and it is used on 5 Starr trailers to support the guides.

Stock# 1041381
LOADRITE galvanized side guide brackets are formed at a 105° and measure 1-1/2" x 1-1/2" square each. The long side is 33" and the shorter side is 26" and it is used on 5-Starr trailers to support the guides.

Stock# 1041496
LOADRITE 5-Starr guide post kit uses 1-1/2" x 1-1/2" galvanized tubing with 107° angle and includes one pair of guide posts and hardware.  15" of width adjustment on each side, guide post height of 60".  This is a replacement kit for LoadRite trailers that feature 1.5" square hole in the middle of the I-Beam and is NOT intended for new applications.

Stock# 1041403
LOADRITE guide post kit uses 1-1/2" x 1-1/2" galvanized tubing with 105° angle and includes one pair of guide posts and hardware.  15" of width adjustment on each side, guide post height of 60".  This is a replacement kit for LoadRite trailers that feature 1.5" square hole in the middle of the I-Beam and is NOT intended for new applications.

Stock# 1041416
LOADRITE kit includes one pair of guide posts and hardware for 5" tall frames.
15" of width adjustment on each side, guide post height of 60".

Stock# 1041344
LOADRITE factory O.E.M. Bow Rest Guide measures 48" wide and 24" to the center of the keel bump pad. This is a kit that comes with the mounting bracket and mounting hardware to fit a 2" x 3" crossbars.

Stock# 1041410
LOADRITE target bunk kit is used to add a pair of bunks that attach to the front crossbar of a trailer. It is adjustable both front to back as well as the height, and designed to provide support below the bow area on 5-Starr and Load Rite AC21, AC23, and AC25 model boat trailers.

Stock# 1041382
LOADRITE Galvanized Side Guide Bracket is designed for use with the 105° 1-1/2" x 1-1/2" square side guide on 5 Starr trailers.

Stock# 1041430
LOADRITE support bolster bracket for bunk boards. 2-11/16" long double slots for adjustment. 11ga. Galvanized bolster brackets are slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.

Stock# 1041436
LOADRITE support bolster bracket for bunk boards and features long double slots for adjustment. 11ga. Galvanized bolster brackets are slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.

Stock# 1041437
LOADRITE support bolster bracket for bunk boards and features long double slots for adjustment. 11ga. Galvanized bolster brackets are slotted for vertical adjustment and feature non-slip dimples to avoid movement and increase load capacity.

Stock# 1041288
LOADRITE 11-gauge galvanized steel bunk mounting bracket bolts to bolster support brackets to attach bunks and set proper angle. 7/16" holes.

Stock# 1041303
Loadrite galvanized steel bunk mounting bracket bolts to bolster support brackets to attach bunks and set proper angle.
Measures 3-1/2" wide x 2" x 1"

Stock# 1041345
Galvanized Bunk Bracket Posi-Lock for 2" crossbar is designed to add support to your bunk brackets. Bracket is designed to accept 7/16" U-bolts.

Stock# 1041346
LOADRITE galvanized bunk bracket Posi-Lock for 3" crossbar is designed to add support to your bunk brackets. Bracket is designed to accept 7/16" U-bolts.

Stock# 1041342
LOADRITE light-duty Left Hand galvanized steel bunk 'Billy' mounting bracket bolts to crossbar at angle need for bunk board.

Stock# 1041343
LOADRITE light-duty Right Hand galvanized steel bunk 'Billy' mounting bracket bolts to crossbar at angle need for bunk board.

Stock# 1041373
Left Hand galvanized steel bunk 'Billy' mounting bracket bolts to crossbar at angle need for bunk board. Total Length of Bracket is 12.25".

Stock# 1041374
Right Hand galvanized steel bunk 'Billy' mounting bracket bolts to crossbar at angle need for bunk board. Total Length of Bracket is 12.25".

Stock# 1041349
LOADRITE 5.07" x 4.81" tall galvanized 90° bracket allows for pivoting of bunk boards or roller assemblies. Bottom mounting holes are on 3-3/8" centers for a 3" crossbar.

Stock# 1041376
LOADRITE hot dip galvanized pivot bar measures 7.75" H x 4.81" W and is pre-drilled for easy mounting. The bottom mounting holes are 3.5" on center. Mounting hardware not included.

Stock# 1041295
LOADRITE 3/8" thick galvanized steel pontoon bunk bracket bolts to 2" x 2" frame and can be used with 2" x 4" or 2" x 6" bunk boards. Bracket is 3/8" thick, has 3/8" mounting holes on 2-1/2" centers, a 11.44" span and a 3.5" width. Sold as each.

Stock# 1041378
LOADRITE pontoon trailer bunk board bracket will help customize the look of your pontoon trailer. Made from 1/8" galvanized steel, bracket is designed to be used in pairs to support various lengths of 2x6 bunk boards.

Stock# 1041379
LOADRITE pontoon trailer bunk board bracket will help customize the look of your pontoon trailer. Made from 1/8" galvanized steel, bracket is designed to be used in pairs to support various lengths of 2x4 bunk boards.

Stock# 1041231
LOADRITE 2-hole aluminum slider strap. Holes are 2" on center. ( 1/4" x 3/4" x 2-3/4")

Stock# 1041351
Leg Length (H) = 3.75", Leg Width (W)= 5.125", Thread (A)= 3/8".
LOADRITE stainless steel steel U-Bolt (Nuts and washers sold separately)

Stock# 1041375
LOADRITE 1/2" x 5-1/2" Wide x 4" Long cadmium plated u-bolt for mounting Bunk Brackets or other frame components. (locknuts not included)