PJ TRAILER Assorted Factory Hardware

Stock# 7129179
PJ TRAILER Bumper-Pull A-Frame Toolbox. Dimensions: 34-1/2" back x 20" front x 12-1/2" high. Latch is on the front side.

Stock# T7129176
PJ TRAILER landscape tool boxes mount at the front of U6, U7, & U8 Channel Utility Trailers.
Ships 'Truck Freight' and is subject to delivery service limitations. (Click Truck for details)

Stock# 7129160
PJ TRAILER kit converts the 180700 to carry and lock a leaf blower as well as a water cooler and a spool of trimmer line. The kit is for Expansion/Converion Only, this is Not a freestanding rack system, it cannot be used by itself. The Expansion/Conversion Rack Kit will need to be mounted to pre-existing beam posts, such as the 3-Place Trimmer Rack.
SUPPLIES LIMITED

Stock# 7129199
Includes: One cast iron hub rated for 3.5K axles, bearings, 1.718 grease seal, standard dust cap and lug nuts.
Bolt Circle: 5 on 4.5"
SUPPLIES LIMITED

Stock# 7129096
PJ TRAILER 5" on 5" Bolt Pattern ONLY spare tire mount can be used for bolt on or weld on applications. The mounting plate measures 5-1/4" x 3-1/2" and it has a black powder coat finish.
SUPPLIES LIMITED

Stock# 7129007
PJ TRAILER Spare Tire Mount can be used for bolt on or weld on applications. The mounting plate measures 5-1/4" x 3-1/2" and it has a black powder coat finish.

Stock# 7129016
PJ TRAILER black powder coated steel spare tire mount fits most trailers with standard size stake pockets. Includes tension bolt. 3-1/2" spare tire base square tubing offsets the mounting plate 7-1/2" from the trailer. Wheel studs not included, fits 5 on 5" bolt patterns only. 

Stock# 7129107
PJ TRAILER Adjustable Pipe Stake measures 24" in length and is formed steel channel with holes for multiple pin locations that allow you to adjust the position of the stake in the pocket. Often used to prevent pipe or other materials from rolling or sliding off the trailer. Measures 24" over all length x 3-3/8" wide x 1-3/8" deep. Includes two pins and keepers.
SUPPLIES LIMITED

Stock# 7129106
PJ TRAILER Adjustable Pipe Stake measures 48" in length and is formed steel channel with holes for multiple pin locations that allow you to adjust the position of the stake in the pocket. Often used to prevent pipe or other materials from rolling or sliding off the trailer. Measures 48" over all length x 3-3/8" wide x 1-3/8" deep. Includes two pins and keepers.
SUPPLIES LIMITED

Stock# 7129159
PJ TRAILER Locking 3 Place Trimmer Rack with included Free 3 lb Trim Line Holder and 3 Bonus Keyed a-like Locks! This rack is designed to hold 3 string trimmers and a 3 lb Trim line.
SUPPLIES LIMITED

Stock# 7129097
PJ TRAILER steel stake pocket mount 3/8" D-Ring fits into standard flush and outside stake pockets no smaller then 3-1/2" x 1-1/2" with a 3" height. Has a 3,000 Lb. capacity.

Stock# 7129189
The PJ Trailer right hand round light bracket is made from 18 gauge raw steel and is intended to be used with 2" round grommet mount trailer marker lights. Pre-drilled mounting slot on top for 3/8" hardware.

Stock# 7129088
PJ TRAILER left hand round light bracket is made from 18-gauge raw steel and is intended to be used with 2" round grommet mount trailer marker lights. Pre-drilled mounting slot on top for 3/8" hardware.

Stock# 7129111
PJ Trailer right hand oval / round light bracket is made from 18 gauge raw steel and is intended to be used with 2" round grommet mount trailer marker lights and 6" oval grommet mount trailer lights.

Stock# 7129110
PJ TRAILER left hand oval / round light bracket is made from 18-gauge raw steel and is intended to be used with 2" round grommet mount trailer marker lights and 6" oval grommet mount trailer lights.

Stock# 7129198
PJ TRAILER hub covers are manufactured from temperature stable ABS thermoplastic and provide an excellent finished look on trailer wheels. Covers securely attach over each wheel stud nut.

Stock# 7129197
PJ TRAILER hub covers are manufactured from temperature stable ABS thermoplastic and provide an excellent finished look on trailer wheels. Covers securely attach over each wheel stud nut.

Stock# 7129196
PJ Trailer hub covers are manufactured from temperature stable ABS thermoplastic and provide an excellent finished look on trailer wheels. Covers securely attach over each wheel stud nut.

Stock# 7129055
PJ TRAILER cargo trailer door hook and keeper assembly. Zinc plated steel stamping construction.

Stock# 7129036
PJ TRAILER steel safety chain secures the trailer to the tow vehicle in the event the trailer coupler comes off of the ball. Safety chain is equipped with latching hook and is 30" x 5/16" with a 5,000 lbs. capacity. Sold as each.

Stock# 7129119
PJ TRAILER Inner Light Cover is the rear cover that protects the back side of the 3 center identification lights on bumper part number 160240. Constructed of raw steel and measures 55-1/2" x 3-1/2" x 2".
SUPPLIES LIMITED

Stock# 7129190
The PJ Trailer FD/LD Straight Deck Inner Light Cover is the rear cover that protects the back side of the brake lights on bumper part number 160240. Constructed of raw steel and measures 25-1/2" x 10-1/2" x 6-1/2".
SUPPLIES LIMITED

Stock# 7129120
The PJ Trailer FD/LD Straight Deck Inner Light Cover is the rear cover that protects the back side of the brake lights on bumper part number 160240. Constructed of raw steel and measures 25-1/2" x 10-1/2" x 6-1/2".

Stock# 7129201
PJ Trailer raw steel weld-on strap tie measures 5-1/2" x 3-1/4".
SUPPLIES LIMITED

Stock# 7129035
PJ TRAILER raw steel 6" weld-on gate grab handle.

Stock# 7129195
PJ TRAILER powder coated steel monster step has an 2-1/2" deep perforated anti-slip metal grip step and can be used in many commercial or non-commercial truck and trailer applications.

Stock# 7129032
The PJ Trailer raw steel weld-on end cap measures 2-7/8" x 3-7/8".
SUPPLIES LIMITED

Stock# 7129037
PJ Trailer replacement black vinyl handle grip for cam lock kits. Universal grip fits most cam-type door lock handles.

Stock# 7129183
This unit will work with PJ Trailer hydraulic pumps on trailers built after January 2015. Kit Includes: Remote Dbl/Sgl KTI 6" 2015 Connector & Extension, KTI, 15' 2015 Connector.

Stock# 7129182
PJ Trailer 3 quart capacity hydraulic reservoir tank. Fits 190605 pumps and measures 6.5"L x 6.5" W x 6.75" H with 4" x 4" mounting holes. Does NOT come with plug, filler cap, or o-ring.

Stock# 7129181
PJ Trailer 6-quart capacity hydraulic reservoir tank. Fits 190601 pumps and measures 13"L x 7" W x 7" H with 4" x 4" mounting holes. Does NOT come with plug, filler cap, or o-ring.

Stock# 7129174
PJ TRAILER clevis pin measures 3/4" x 2-1/4", comes with cotter pin, and is typically used on PJ Tri-gate applications.