Marine Pump Fittings and Accessories

Stock# 1536124
The Rule-A-Matic float switch now includes a removable base for easy cleaning and servicing, a mercury free snap switch tested to over one million cycles and marine grade “blocked” wire.

Stock# 5229544
ATTWOOD Automatic Bilge Switch #4801-7 combines proprietary EST (Electronic Sensing Technology) and no moving parts to create an efficient working switch. All the electronics on the switch are protected from the elements.

Stock# 5229480
ATTWOOD white 3/4" I.D. bilge hose fits all 3/4" O.D. pump outlets. Includes two plastic hose clamps.

Stock# 5307006
The SHURflo nylon accumulator tank will reduce pulsation and pressure spikes, increase the life of your pump and even save battery power.
SUPPLIES LIMITED

Stock# 5307010
SHURFLO replacement pump head for the 2088 series of pumps can easily be repaired in just minutes by removing the old pump head and sliding the new head on. Includes easy to follow instructions.

Stock# 1492269
SeaSense Wash Down Hose and Nozzle offers an easy to store coiled hose that will return to its shape. The non corrosive coiled, 1/2" diameter, 15' long hose will prevent crimps and is weather resistant.

Stock# 5308033
SHURflo's Raw Water Strainer features a clear twist off bowl and removable stainless steel screen, which allows for easy inspection and cleaning. Accepts 1/2" NPT fittings

Stock# 5308047
SHURflo's Raw Water Strainer features a clear twist off bowl and removable stainless steel screen, which allows for easy inspection and cleaning. Accepts 3/4" NPT fittings

Stock# 5307007
SHURflo's Classic™ Series Strainer keeps your Smart Sensor™ 4.0 or Classic™ Series pump flowing smooth and strong. Protects your pump by straining debris particles that can be trapped in the water storage tank.

Stock# 5307008
SHURflo's Classic™ Series Strainer keeps your Smart Sensor™ 4.0 or Classic™ Series pump flowing smooth and strong. Protects your pump by straining debris particles that can be trapped in the water storage tank.

Stock# 5307009
Shurflo's Silencing kit connects to the inlet and outlet of your water pump to reduce unwanted pump and plumbing noise. Kit includes two 36" soft tube risers and two 1/2" male connectors for connection to most RV pumps.

Stock# 5308020
Straight nylon pump fitting adapter. Shurflo part # 8-269-01.
Fitting Size: 1/2"-14 Male NPT x 3/4" hose barb

Stock# 5308042
SHURflo Straight polypropylene hex swivel pump fitting.  Fitting Size: 1/2"-14 Female NPT x 1/2" hose barb.

Stock# 5308043
Straight polypropylene hex swivel pump fitting.
Fitting Size: 1/2"-14 Female NPT x 5/8" hose barb

Stock# 5308044
Shurflo straight polypropylene hex swivel pump fitting.
Fitting Size: 1/2"-14 Female NPT x 3/4" hose barb

Stock# 1576143
Elbow polypropylene hex swivel pump fitting.
Fitting Size: 1/2"-14 Female NPT x 1/2" hose barb

Stock# 1576141
Elbow polypropylene hex swivel pump fitting.
Fitting Size: 1/2"-14 Female NPT x 3/4" hose barb

Stock# 5229189
ATTWOOD 90 Degree thru-hull connector is ideal for tight space because it eliminates hose kinking.

Stock# 5282062
PERKO molded white polymer thru-hull connection for use with 1/2" I.D. hose. Features broad 1-1/2" outside diameter flange with two flat grooves to assist with installation. Neck is threaded to approximately 1/4 inch from flange.

Stock# 5282063
Perko molded white polymer thru-hull connection for use with 5/8" I.D. hose. Features broad 1-1/2" outside diameter flange with two flat grooves to assist with installation. Neck is threaded to approximately 1/4 inch from flange.

Stock# 5282064
PERKO molded white polymer thru-hull connection for use with 3/4" I.D. hose. Features broad 1-7/8" outside diameter flange with two flat grooves to assist with installation. Neck is threaded to approximately 1/4 inch from flange.

Stock# 5282065
PERKO molded white polymer thru-hull connection for use with 1" I.D. hose. Features broad 2-1/4" outside diameter flange with two flat grooves to assist with installation. Neck is threaded to approximately 1/4 inch from flange.

Stock# 5282066
Perko molded white polymer thru-hull connection for use with 1-1/8" I.D. hose. Features broad 2-1/4" outside diameter flange with two flat grooves to assist with installation. Neck is threaded to approximately 1/4 inch from flange.