SHORELAND'R Bunk Mounting Hardware

Stock# 5422104
SHORELAND'R factory O.E.M. adjustable bunk bracket with mounting hardware for 2" x 3" crossbars. Bracket has a black painted finish, measures 8-1/2" in length and has 11 holes for adjustment.

Stock# 5422103
SHORELAND'R factory O.E.M. adjustable bunk bracket with mounting hardware for 2" x 3" crossbars. Bracket has a white painted finish, measures 8-1/2" in length and has 11 holes for adjustment.

Stock# 5422102
SHORELAND'R factory O.E.M. adjustable bunk bracket with mounting hardware for 2" x 3" crossbars. Bracket has a galvanized steel finish, measures 8-1/2" in length and has 11 holes for adjustment.

Stock# 5422263
SHORELAND'R factory O.E.M. adjustable bunk bracket for 2" x 3" crossbars. Bracket has a galvanized steel finish, measures 11" in length and has 15 holes for adjustment. Bracket only.

Stock# 5422175
SHORELAND'R galvanized steel bunk mounting bracket mounts directly to trailer crossbar. The bracket has oval shaped mounting holes on bottom for adjustability. All mounting holes accept a 3/8" bolt.

Stock# 5422177
SHORELAND'R galvanized steel bunk mounting front bracket mounts directly to trailer crossbar towards the front of the trailer. The bracket is designed for the front of the trailer. All mounting holes accept a 3/8" bolt except the hole in the bottom corner which accepts 1/2" bolt.

Stock# 5422265
The ShoreLand'r galvanized steel bunk clamp bracket is 1/8" thick, 3-1/8" inside notch to inside notch. Mounting holes are 3/8" and are 2-1/8" on center.

Stock# 5422176
SHORELAND'R galvanized steel bunk mounting bracket accepts 2" x 4" bunks. Bracket is 1/8" thick x 3-1/2" I.D.

Stock# 5422284
SHORELAND'R galvanized steel bunk mounting bracket accepts 2" x 6" bunks. Bracket is 1/8" thick x 5-1/2" I.D.

Stock# 5422172
3/8"-16 stock Square U-Bolt:  Leg Length (A) = 2", Leg Width (B) = 1-13/16", Thread (C) = 1-1/2"
Zinc plated finish u-bolt is used for Shoreland'r wobble roller pivot arm assemblies. Nuts and washers sold separately.

Stock# 5422294
3/8"-16 stock Square U-Bolt:  Leg Length (A) = 1-3/4", Leg Width (B) = 1-13/16", Thread (C)= 1-1/4"
Zinc plated finish u-bolt is used for mounting leaf springs to Shoreland'r axles. Nuts and washers sold separately.

Stock# 5422239
3/8"-16 stock Square U-Bolt:  Leg Length (A) = 3", Leg Width (B) = 3-1/16", Thread (C)= 1"
Zinc plated finish u-bolt is used for mounting on Shoreland'r 3" wide frames. Nuts and washers sold separately.

Stock# 5422258
3/8"-16 stock Square U-Bolt:  Leg Length (A) = 4-1/8", Leg Width (B) = 3-1/16", Thread (C) = 1-3/4"
SHORELAND'R zinc plated finish u-bolt is used for mounting on 3" frames. Nuts and washers sold separately.

Stock# 5422281
SHORELAND'R galvanized steel adjustable channel bracket mounts directly to the trailer crossbar for use with Shoreland'r bunk support systems.