SHORELAND'R Boat Trailer Rollers and Assemblies

Stock# 5422167
SHORELAND'R 5" x 3" Factory O.E.M. molded rubber wobble roller.
Measurements: 5" diameter, 3" width, 1-1/2" shaft, 1-1/2" bearing length.

Stock# 5422108
ShoreLand'r 5" x 3" Factory O.E.M. black molded rubber roller kit includes roller, shaft insert, inner washer, outer washer and hog ring. Measurements: 5" diameter, 3" width, 3/4" shaft, 1-1/2" bearing length.

Stock# 5422135
ShoreLand'r 6" x 3" Factory O.E.M. black rubber roller with molded hub kit includes roller, shaft insert, inner washer, outer washer and hog ring. Measurements: 6" diameter, 3-1/4" width, 1-1/2" shaft, 1-1/2" bearing length.

Stock# 5422100
SHORELAND'R bow stop roller assembly consists of a polyurethane center bow "v" with two rounded end caps and a 1/2" mounting bolt. Polyurethane bow rollers are shock absorbing and will not mark your boat. These UV resistant bow stops will outlast ordinary rubber rollers. Measurements: Overall Length: 6" End Width: 3"

Stock# 5422122
SHORELAND'R bow stop roller assembly consists of a polyurethane center bow "v" with two large end bells and a 1/2" mounting bolt. Polyurethane bow rollers are shock absorbing and will not mark your boat. These UV resistant bow stops will outlast ordinary rubber rollers. Measurements: Overall Length: 7-1/8"  End Width: 5-1/8" Center Roller Length: 3-5/8"

Stock# 5422137
SHORELAND'R factory O.E.M. wobble roller pin assembly. Measures 11" center of roller to center of roller and a mounting bracket that has an inside measurement of 1-3/4." High strength white painted steel frame roller assemblies provide optimum support for most trailerable boats.

Stock# 5422136
SHORELAND'R factory O.E.M. wobble roller pin assembly. Measures 11" center of roller to center of roller and a mounting bracket that has an inside measurement of 1-3/4." High strength hot dipped galvanized steel frame roller assemblies provide optimum support for most trailerable boats.

Stock# 5422118
ShoreLand'r factory O.E.M. adjustable quad wobble roller assembly. Rollers measure 11" center of roller to center of roller and 21" from roller arm to roller arm. High strength black painted steel frame roller assemblies provide optimum support for most trailerable boats. Each assembly includes mounting hardware and bracket.

Stock# 5422268
SHORELAND'R galvanized keel cradle bracket mounts directly to trailer crossbar. Typically used to attach bunk and/or roller assemblies to the trailer. All mounting holes accept a 3/8" bolt.

Stock# 5422269
SHORELAND'R replacement keel cradle roller pin measures 5/8" x 9-1/2" and is used to mount a keel roller cradle to the trailer.

Stock# 5422249
SHORELAND'R replacement keel cradle roller pin measures 5/8" x 11-1/2" and is used to mount a keel roller cradle to the trailer.

Stock# 5422161
Fits ShoreLand'r wobble roller assemblies. Measures 1.80" L x .95" H and has a .90" opening prior to being compressed.

Stock# 5422165
Replacement aluminum washer for Shoreland'r smooth wobble rollers.
Fits 3/4" shafts and has a 1-7/8" outside diameter.

Stock# 5422139
Replacement galvanized washer for Shoreland'r smooth wobble rollers.
Fits 3/4" shafts and has a 1-1/2" outside diameter.

Stock# 5422166
SHORELAND'R 1-1/8" ID x 2" OD aluminum wobble roller bushing washer used on ShoreLand'r Trailers.

Stock# 5422140
Replacement galvanized spacer bushing for Shoreland'r smooth wobble rollers.
Accepts 3/4" shafts and measures 1-1/2" long.

Stock# 5422164
Replacement molded PVC wobble roller bushing used on SHORELAND'R boat trailers. Length: 2-1/8".

Stock# 5422168
Molded plastic swivel block used on SHORELAND'R roller trailers.
Diameter: 2-5/8"    Width: 1-3/4"

Stock# 5422119
ShoreLand'r factory O.E.M. rear pivot bar for 44" wide frames. This pivot bar has pre-drilled holes and accepts adjustable and fixed mount quad roller assemblies. Pivot bar measures 41" in length and is constructed with high strength galvanized steel. Includes mounting hardware.
SUPPLIES LIMITED - 1 left in stock

Stock# 5422121
ShoreLand'r factory O.E.M. rear pivot bar for 44" wide frames. This pivot bar has pre drilled holes and accepts adjustable and fixed mount quad roller assemblies. Pivot bar measures 41" in length and is constructed with high strength black painted steel. Includes mounting hardware.
SUPPLIES LIMITED - 2 left in stock