Swing Door Hinges and Hardware

Stock# 5445008
This set allows for relocation of standard horizontal mount brackets from one vehicle to another. Kit includes two mounting sockets and all necessary hardware.
SUPPLIES LIMITED

Stock# 5445061
The Kentucky Style Side Door Hinge Assembly by Fleet Engineers replaces Kentucky part #6616600000.
SUPPLIES LIMITED

Stock# 5445012
FLEET ENGINEERS End Hinge and Roller Cover for 2" Rollers features a steel construction and black e-coat finish.
SUPPLIES LIMITED

Stock# 5445015
The Center Hinge for Flush Mount 2" Roller Doors features a steel construction and black e-coat finish.
SUPPLIES LIMITED

Stock# 5445051
The Great Dane Style Three-Hole Hinge by Fleet Engineers measures 8.38” x 3.88” and is a direct replacement for Great Dane part number 31801018.
SUPPLIES LIMITED

Stock# 5445237
FLEET ENGINEERS Dorsey Style Aluminum Four-Hole Hinge by Fleet Engineers measures 10” x 2-3/4”.
SUPPLIES LIMITED

Stock# 5445246
The Miller Style Three-Hole Greasable Hinge by Fleet Engineers measures 9-1/2” x 4” and has a zinc plated finish.
SUPPLIES LIMITED

Stock# 5445250
The Trailmobile Style Three-Hole Hinge by Fleet Engineers measures 7” x 3-1/2” and has a zinc plated finish.
SUPPLIES LIMITED

Stock# 5445251
The Trailmobile Style Three-Hole Hinge by Fleet Engineers measures 7” x 3-1/2” and has a zinc plated finish.
SUPPLIES LIMITED

Stock# 5445253
The Utility Style Three-Hole Hinge by Fleet Engineers measures 12” x 3” and has a zinc plated finish.
SUPPLIES LIMITED

Stock# 5445255
The Dorsey Style Hinge Butt by Fleet Engineers measures 3-1/2” x 1-1/4” and is stainless steel. Height to hole is 1.75"
SUPPLIES LIMITED

Stock# 5445257
The Miller Style Hinge Butt by Fleet Engineers measures 5” x 1-1/4” and has a zinc plated finish. Height to Hole is 1.12".
SUPPLIES LIMITED

Stock# 5445262
The Dorsey Style Hinge Butt by Fleet Engineers measures 5” x 1-1/4” and is raw steel. Height to hole is 1.12"
SUPPLIES LIMITED

Stock# 5445263
The Dorsey Style Hinge Butt by Fleet Engineers measures 3-1/2” x 1-1/4” and is raw steel. Height to hole is 2.13"
SUPPLIES LIMITED

Stock# 5445265
The Wabash Style Hinge Butt by Fleet Engineers measures 3-3/4” x 1-1/4” and is raw steel. Height to hole is 1.38"
SUPPLIES LIMITED

Stock# 5445266
The Fruehauf Style Hinge Butt by Fleet Engineers measures 5” x 1-1/4” and has a zinc plated finish. Height to Hole is 1.88".
SUPPLIES LIMITED

Stock# 5445267
FLEET ENGINEERS Trailmobile Style Hinge Butt measures 3-3/4” x 1-1/4” and is raw steel. Height to hole is 1.63"
SUPPLIES LIMITED

Stock# 5445249
FLEET ENGINEERS TRAILMOBILE aluminum three-hole hinge measures 7-3/8” x 2-7/8”.
SUPPLIES LIMITED

Stock# 5445063
The Manac Style No Hole Hinge by Fleet Engineers measures 9.30" x 2.50" x .48" and replaces Manac Part # 353-239.
SUPPLIES LIMITED

Stock# 5445064
The Monon Style Three Hole Hinge by Fleet Engineers measures 8.50 x 4.00" and replaces Monon Part # PC1310.
SUPPLIES LIMITED

Stock# 5445065
Monon Style Three Hole Hinge with Insert by Fleet Engineers measures 9.95" x 4.00" and replaces Monon Part # D045011.
SUPPLIES LIMITED

Stock# 5445070
The Strick Style Three Hole Hinge by Fleet Engineers measures 6.75" x 3.00" and replaces Strick Part # AA35F00100100.
SUPPLIES LIMITED

Stock# 5445143
FLEET ENGINEERS 3.25" narrow butt hinge assembly is a flush weld-on assembly that includes a removable pin using nut, bolt, and thrust washers. Plain steel finish.
SUPPLIES LIMITED

Stock# 5445146
The 8" embossed hinge assembly with stamped reinforced rib has a zinc plated finish and is made with hardened steel truss bearings to effectively carry door loads. Includes removable pin using nut, bolt, and thrust washers.
SUPPLIES LIMITED

Stock# 5445147
The 8" polished stainless steel square butt leaf hinge has spot welded leaves and thrust washers and .34" holes.
SUPPLIES LIMITED - 3 left in stock

Stock# 5445149
FLEET ENGINEERS 9" narrow butt hinge assembly (Miller Style) has a 62 offset and comes with 1.75″ bolt height, nut, and thrust washer. Zinc plated finish.
SUPPLIES LIMITED

Stock# 5445212
The Wabash Style Four Hole Hinge by Fleet Engineers measures 9.50" x 2.75" x .25".
SUPPLIES LIMITED

Stock# 5445138
Fruehauf and Miner style hinge pin is zinc plated with a 5-1/4" length and a 1/2" diameter.
SUPPLIES LIMITED

Stock# 5445139
The Dorsey style hinge pin is zinc plated with a 5.00" length and a .38" diameter.
SUPPLIES LIMITED

Stock# 5445049
FLEET ENGINEERS One-Piece Weld-On Hinge Butts feature a plain steel construction and is intended for custom hinge applications.
SUPPLIES LIMITED